Skip to main content

The rogue G28-1 California State Highway Spades

In this short blog we look at the somewhat rare but not unheard-of rogue G28-1 California State Highway Spades.


Part 1; what is the G28-1 California State Highway Spade? 

The Caltrans Manual of Uniform Traffic Control Devices Sign Chart from 2014 ("Caltrans MUTCD") dictates the types of signs and highway shields permitted for traffic control use in California.  California is known for it's more ornate cut-out shields which are used for, US Routes, Interstate Highways, and State Routes.  The common shields which are typically found through California are:

US Route:  G26-2

Interstate:  G27-2

State Highway:  G28-2

The Caltrans MUTCD provides alternative shields for, US Routes, Interstate Highways, and State Routes.  These alternative shields are intended for guide sign usage but aren't explicitly limited to said function.  These alternative shields are:

US Route:  G26-1

Interstate:  G27-1

State Highway:  G28-1

The primary reassurance shields for; US Routes, Interstate Highways, and State Highways can be seen depicted below.


Part 2; the rogue G28-1 California State Highway Spades

While in theory the G26-1 US Route Shield and G27-1 Interstate Shield could possible see a non-guide sign reassurance shield use I personally haven't encountered any on the road  Conversely I have encountered numerous G28-1 State Highway Spades in use as reassurance shields.  I have also acquired several G28-1 California State Highway Spades in my signage collection. 

The cover to this blog is an unused G28-1 California State Route 14 ("CA 14") shield I have in my sign collection.  This CA 14 is tiny as it measures only 18x18 inches.

I also have a G28-1 style CA 135 shield which can be identified as intended for assurance use given it has two mounting holes.  This shield is an older variant which is comprised from reflective paint with vinyl numerals.  

In terms of field signage this G28-1 CA 227 shield can be found near Arroyo Grande.

This G28-1 CA 180 shield was found on Whites Bridge Avenue (former CA 180) west of downtown Fresno. 

This G28-1 CA 270 shield once served as the first westbound reassurance shield as Bodie Road transitions from State Park maintenance to Caltrans maintenance.  Unfortunately this shield was missing upon my last visit to Bodie State Historic Park.  

G28-1 shields can be found in use in Yosemite National Park on El Portal Road and the Big Oak Flat Road.  CA 140 is marked on El Portal Road whereas CA 120 is marked on the Big Oak Flat Road and Tioga Pass Road.  

Know of any other G28-1 State Highway Shields in use around California for reassurance purposes?  Know of any G26-1 US Route Shields or G27-1 Interstate Highway Shields in use for reassurance purposes?  If so, please feel free to share in the comments, we would love to hear from you.

Comments

Anonymous said…
As I understand it, the G28-1 signs in Yosemite National Park aren't really used for "reassurance", since the state highways shown on those signs don't officially exist within the park, but rather end at the park boundaries. This is reflected in the legislative definitions of those routes, and Caltrans' Postmile Query Tool.

Those signs within the park seem intended to help park visitors reach the state highways outside the park.

Oscar Voss, ovoss@pobox.com
Challenger Tom said…
With CA 120 and 140 in Yosemite that is an interesting topic. 120 definitely signed enough that one could infer that it is continuous through the Park on the Tioga Pass Road and Big Oak Flat Road. With 140 it’s original 1934 definition had it use El Portal Road and the Old Big Oak Flat Road through the Park to reach CA 120 on what is now Evergreen Road (the Old Tioga Road) just outside the Yosemite boundary. I’ve been trying to find photos for years which might show CSAA 140 shields in Yosemite on the Big Oak Flat Road, thus far to no avail.
Stevashe said…
I know of one location with some rogue G28-1 signs that was actually only posted this year, and it even has two since it happens to be on a concurrency! It's on CA 36/89 just east of the CA 89 turnoff for Lassen National Park and Morgan Summit, where a realignment project was just completed. Unfortunately I only seem to have managed to get a picture of the back of the sign assembly, but you can at least see it has the different shape of the G28-1 compared to the G28-2: https://www.flickr.com/photos/184498735@N04/50379707676/in/dateposted-public/
Randy said…
There's a couple G28-1 style CA-58 signs at the Mojave/CA City Blvd overpass and freeway entrance.

Popular posts from this blog

Old River Lock & Control Structure (Lettsworth, LA)

  The Old River Control Structure (ORCS) and its connecting satellite facilities combine to form one of the most impressive flood control complexes in North America. Located along the west bank of the Mississippi River near the confluence with the Red River and Atchafalaya River nearby, this structure system was fundamentally made possible by the Flood Control Act of 1928 that was passed by the United States Congress in the aftermath of the Great Mississippi River Flood of 1927 however a second, less obvious motivation influenced the construction here. The Mississippi River’s channel has gradually elongated and meandered in the area over the centuries, creating new oxbows and sandbars that made navigation of the river challenging and time-consuming through the steamboat era of the 1800s. This treacherous area of the river known as “Turnbull’s Bend” was where the mouth of the Red River was located that the upriver end of the bend and the Atchafalaya River, then effectively an outflow

Interstate 10S and the original Interstate 110 in California

Interstate 10S is a short spur of Interstate 10 along San Bernardino Freeway in downtown Los Angeles.  Interstate 10S begins at the Santa Ana Freeway (US Route 101) and extends east to Interstate 5 where it merges into mainline Interstate 10.  Interstate 10S is one of the oldest freeway segments in Los Angeles having been part of US Routes 60, 70 and 99 when it was part of the corridor of the Ramona Expressway.  The current corridor of Interstate 10S was assigned as Chargeable Corridor H following the passage of the 1956 Federal Highway Aid Act.  Interstate 110 was a short-lived designation which comprised the segment San Bernardino Freeway from US Route 101 to Interstate 5 between 1964-1968.  The original Interstate 110 was dropped as a Chargeable Corridor during 1965 and consolidated as Interstate 10S during 1968.   The original Interstate 110 can be seen as the blog cover photo as it was featured on the 1964 Division of Highways Map.  Below the entire 0.65-mile length of Interstate

Vicksburg Bridge (Vicksburg, MS)

  Located a few hundred feet downriver from the Old Vicksburg Bridge, the Vicksburg Bridge, or the “New” Bridge, serves as the city’s vehicular crossing of the Mississippi River on the main highway connecting Vicksburg with northeastern Louisiana to the west and the state capital of Jackson to the east. The completion of the original Vicksburg Bridge in 1930 was seen as a huge success and the bridge proved to be a profitable entity for both road and railroad interests along the path of the Dixie Overland Highway and the subsequent US Highway 80 corridor. In the years after the creation of the National Interstate Highway System, planning commenced on a new bridge at the site that would relieve the congestion on the existing bridge while providing for a more modern crossing of the river that would be safe for all vehicles. The construction of the new bridge at Vicksburg was completed in 1973 and its design intentionally mimics that of its predecessor nearby. This was due in large part