Skip to main content

Oregon Route 62 Rogue Valley Expressway

By

Much of Oregon Route 62 recently in the Medford Area has been moved from Crater Lake Highway to the Rogue Valley Expressway. 

The Rogue Valley Expressway is a 4.5 mile segment of Oregon Route 62 ("OR 62") which is a limited access bypass of Crater Lake Highway.  The Rogue Valley Expressway begins just south of OR 140 and terminates about a half mile from Interstate 5 ("I-5").  The Rogue Valley Expressway was intended to expedite travel between Medford and White City.  


Part 1; the background of the Rogue Valley Expressway

Much of the history of the Rogue Valley Expressway is discussed in the May issue of ODOT Moving Ahead.  According to ODOT Moving Ahead concepts to move OR 62 from Crater Lake Highway between Medford and White City began to emerge in the 1990s  In 2004 project teams met to narrow down the possible design concepts which would be evaluated for Environmental Impact Statements.  The Rogue Valley Expressway was funded in 2009 via $120 million dollars set aside as part of the Oregon Jobs & Transportation Act.  Construction of the Rogue Valley Expressway began in May 2016 and would open to traffic as mainline OR 62 in May 2019.  



 

Part 2; a drive on the Rogue Valley Expressway

As noted above OR 62 joins the Rogue Valley Expressway just south of OR 140 and White City.  OR 62 westbound makes a right turn off of Crater Lake Highway onto the Rogue Valley Expressway.  The former surface alignment of OR 62 on Crater Lake Highway is signed OR 62 Business.  




Despite being fully limited access and not having any interchanges the Rogue Valley Expressway is signed at a typical Oregon 55 MPH urban freeway speed.


The Rogue Valley Expressway makes a southward jog towards Medford and enters the City Limits at Vilas Road overpass. 





The Rogue Valley Expressway skirts the eastern edge of Rogue Valley International-Medford Airport and merges back into Crater Lake Highway approaching I-5. 









Labels:

Comments

Unknown said…
This comment has been removed by the author.
1:54 AM
Jonathan/Beaver State Roads said…
According to the first draft map, the bypass was going to extend further up current OR-62 to White City. There would have been interchanges at Vilas Road, OR-62 (at or near the current northern end of the bypass) and OR-140 (as a cloverleaf). The 2013 FEIS selected a different longer routing: White City would be bypassed to the west to Dutton Road, eliminating the 140 cloverleaf but adding partial interchanges at existing OR-62 at both ends of White City. The interchange at Vilas road also changed from an SPUI to a tight diamond interchange. At some point, the project was rolled back or split into phase; the Vilas Road interchange was removed, and the bypass now ends at OR-62 between Corey Road and Gregory Road.
1:55 AM
Post a Comment

Popular posts from this blog

May 2023 Ontario Trip (Part 3 of 3)

By
  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...
Post a Comment
Read more

Abandoned Fowler Avenue in Clovis, California

By
Originally Fowler Avenue in the city of Clovis had a brief discontinuation approaching Herndon Avenue.  Fowler Avenue traffic heading northbound was required to detour briefly onto westbound Herndon Avenue.  During 2001 this discontinuation was removed when Fowler Avenue was reconfigured to access the Sierra Freeway (California State Route 168) via an interchange.  This led to a segment of the original alignment of Fowler Avenue just south of Herndon Avenue to be abandoned.  Despite a shopping center opening over part of the original Fowler Avenue alignment in 2016 much of the abandoned roadway remains.   The history of the abandoned original alignment of Fowler Avenue in Clovis The original alignment of California State Route 168 departed downtown Clovis eastbound along Tollhouse Road.  This original alignment did not interact with Fowler Avenue at the Herndon Avenue intersection.  Fowler Avenue north of Tollhouse Road ran north to Herndon Avenue...
Post a Comment
Read more

California State Route 78

By
California State Route 78 is a 194-mile east/west State Highway located in southern California.  California State Route 78 begins at Interstate 5 in Oceanside of San Diego County and terminates at Interstate 10 near Blythe of Riverside County.  California State Route 78 between Interstate 5 and Interstate 15 is aligned on the Ronald Packard Parkway over the corridor traditionally known as the Anza Freeway.  California State Route 78 east of Interstate 15 climbs over mountain grades into the Sonoran Desert where it become a largely rural highway.  The blog cover photo above is California State Route 78 on Vista Avenue between Oceanside and Vista as seen in the 1955 California Highways & Public Works.   Part 1; the history of California State Route 78 Disclaimer; the pre-State Highway history and Glamis Road elements of this blog are sourced from newspaper references attributed to AAroads forum user rschen7754 .  User rschen7754 was the primary Wikip...
Post a Comment
Read more