Work to Start on US 70 Goldsboro Bypass in Fall

With work on one new US 70 Bypass (Clayton) almost over, constructing another one is set to begin. The US 70 Bypass of Goldsboro (or in actuality a bypass of an existing bypass) is set to begin in the fall. Residents got to make comments last Thursday (5/22) at a forum sponsored by the U.S. 70 Corridor Commission which aims to improve the route from I-95 to the coast. The Bypass will be built in 4 phases, only the one to begin this fall running from I-795 (or maybe I-795/US 117) to Wayne Memorial Drive and costing $234 million is funded. The remaining 3 projects are unfunded and will start sometime after 2015.

Story: Goldsboro News-Argus

Commentary: Well, it appears building this bypass will certainly take longer than the US 70 Clayton Bypass. Hopefully this one will have more control over development than that of its predecessor preventing the building of yet another bypass in 10-20 years. What do you think the designations will be when the entire route is finished? Will Business 70 get moved to the old bypass, or will it stay as is leaving just US 13 and NC 111 on the old route?

Comments

Anonymous said…

The current 70 Bypass is universally thought of as "70" to the locals, not 117 or 13. And presumably the new by-bypass will ultimately go beyond Berkley Boulevard, meaning that there will be a non-multiplexed portion of today's bypass that wil get by-bypassed. That section has numerous businesses on it, and therefore we can expect the same resistance to losing the U.S. highway designation that we've seen in other areas.

For these reasons, I'm expecting a situation similar to Smithfield-Selma: today's bypass will become "US 70" (unbannered), the by-bypass will be designated "70 Bypass", and today's 70 Business will remain the same.

5:09 PM

Anonymous said…

I think the current US 70 Business will remain named as it is. I'm not sure about the current "bypass."

I'm a local and like rhodent said, here, we refer to it as "70." It's the main road I take to get into the city from the neighborhood I live in.

6:10 AM

The rogue G28-2 California State Highway Spades

In this short blog we look at the somewhat rare but not unheard-of rogue G28-2 California State Highway Spades affixed to guide signs. Part 1; what is the G28-2 California State Highway Spade? The Caltrans Manual of Uniform Traffic Control Devices Sign Chart from 2014 ("Caltrans MUTCD") dictates the types of signs and highway shields permitted for traffic control use in California. California is known for it's more ornate cut-out shields which are used for, US Routes, Interstate Highways, and State Routes. These shields are intended to be applied as standalone reassurance signs but aren't explicitly limited to said function and occasionally appear in error on guide signs. The common shields which are typically found through California are: US Route: G26-2 Interstate: G27-2 State Highway: G28-2 The Caltrans MUTCD provides alternative shields for, US Routes, Interstate Highways, and State Routes. These alternative shields are intended for guide sign usage. Th

US Route 101 in Benbow, Garberville and Redway

The communities of Benbow, Garberville and Redway can all be found along US Route 101 within southern Humboldt County. The former surface alignment of US Route 101 in Garberville and Redway once crossed the Garberville Bluffs along what is now Redwood Drive via a corridor constructed as part of the Redwood Highway during the 1910s. US Route 101 through Benbow, Garberville and Redway was modernized by 1935. US Route 101 would eventually be upgraded to freeway standards in Benbow, Garberville and Redway by extension of the Redwood Freeway during 1966-68. As the cover photo the original grade of US Route 101 and the Redwood Highway can be seen at the Garberville Bluffs during 1934. US Route 101 can be seen in the communities of Benbow, Garberville and Redway on the 1935 Division of Highways Map of Humboldt County . The history of US Route 101 in Benbow, Garberville and Redway Benbow, Garberville and Redway lie on the banks of the South Fork Eel River of southern Humboldt County. D

Patterson Pass Road

Recently on a day trip to the San Francisco Bay Area I traversed the Diablo Range eastbound via Patterson Pass Road. Patterson Pass Road is an approximately 13 mile roadway which starts at Mines Road in Livermore of Alameda County. Patterson Pass Road eastward ascends over the approximately 1,600 foot namesake Patterson Pass into San Joaquin County where it ends at Interstate 580 near Tracy. Patterson Pass Road has an infamous reputation as being a dangerous roadway due to the lengthy one-lane section and heavy rush-hour commute traffic. Patterson Pass is one of the earliest documented European paths of travel over the Diablo Range as it was explored during the 1775-1776 Spanish Expedition led by Juan Bautista de Anza. The 1775-1776 Spanish expedition charted out much of San Francisco Bay which led to the founding of the Presidio of San Francisco and Mission San Francisco de Asis. Patterson Pass Road between Cross Road east to Midway Road is part of the Juan Bautista de Anza

Gribblenation

Search This Blog