Skip to main content

US Route 99 to Visalia?...

Something that I noticed awhile back while doing map research regarding US Route 99 in Fresno was that the highway intended to be originally routed through the City of Visalia.


This blog is part of the larger Gribblenation US Route 99 Page.  For more information pertaining to the other various segments of US Route 99 and it's three-digit child routes check out the link the below.





The early originally planned alignment of US Route 99 in Visalia

To be clear US 99 was never actually routed through Visalia and ended up bypassing the City in favor of a direct route from Goshen southeast to Tulare.  US 99 within San Joaquin Valley was aligned over Legislative Route 4 which in turn was added to the State Highway System as part of the 1909 First State Highway Bond Act.  LRN 4 for a time was aligned through Visalia via; Mineral King Avenue, Main Street, and Mooney Boulevard.  This early alignment of LRN 4 through Visalia can be seen on the 1924 Division of Highways State Map.


The initial draft of the US Route System was approved by the Secretary of Agriculture during November of 1925.  The US Route System with in California was approved by California Highway Commission with no changes recommended by January 1926.  The initial alignment of US 99 was planned to simply follow LRN 4 from Sacramento south to Los Angeles.  The existing routing of LRN 4 by the start 1926 would have taken US 99 through Visalia.



Thusly US 99 appears on the 1925 Rand McNally Map of California as being routed through Visalia.


US 99 also appears on the 1926 Rand McNally Map of California over LRN 4 through Visalia.


So why wasn't US 99 initially aligned through Visalia?  The answer is that LRN 4 was realigned out of Visalia onto a more direct route between Goshen and Tulare during 1926.  LRN 4 was realigned over what is now Camp Drive in Goshen southwest via a Southern Pacific frontage road east of the rails to I Street in Tulare.  While Visalia was (and is) the Tulare County Seat the new alignment of LRN 4 was far more efficient in terms of getting traffic directly to/from Sacramento and Los Angeles.  Mineral King Road was retained in the State Highway System as part of LRN 10 which would later become CA 198 during 1934.  The new direct Goshen-Tulare alignment of US 99 can be seen the 1926 Division of Highways Map of California.


The final version of the US Route System was approved during November of 1926.  This first official version of the US Route System had US 99 following LRN 4 from Sacramento and Los Angeles which in turn bypassed Visalia.  The US Route System in California along with US Route 99 are detailed in the January 1928 CHPW guide.  Most documented sources tend to agree that the US Routes in California were not signed by the California State Automobile Association ("CSAA") and Automobile Club of Southern California ("ACSC") until 1928.




The initial alignment of US 99 appears on the 1930 Division of Highways Map bypassing Visalia in favor of the direct Goshen-Tulare route. 


Mooney Boulevard would later return to the State Highway System as part of Legislative Route 132 in 1933.  Mooney Boulevard would later be signed as part of CA 63 starting in 1950


Further Reading

Interested in reading about how US Route 99 traversed Tagus Ranch?

Comments

Popular posts from this blog

May 2023 Ontario Trip (Part 3 of 3)

  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...

Abandoned Fowler Avenue in Clovis, California

Originally Fowler Avenue in the city of Clovis had a brief discontinuation approaching Herndon Avenue.  Fowler Avenue traffic heading northbound was required to detour briefly onto westbound Herndon Avenue.  During 2001 this discontinuation was removed when Fowler Avenue was reconfigured to access the Sierra Freeway (California State Route 168) via an interchange.  This led to a segment of the original alignment of Fowler Avenue just south of Herndon Avenue to be abandoned.  Despite a shopping center opening over part of the original Fowler Avenue alignment in 2016 much of the abandoned roadway remains.   The history of the abandoned original alignment of Fowler Avenue in Clovis The original alignment of California State Route 168 departed downtown Clovis eastbound along Tollhouse Road.  This original alignment did not interact with Fowler Avenue at the Herndon Avenue intersection.  Fowler Avenue north of Tollhouse Road ran north to Herndon Avenue...

Did Caltrans just kill the G26 cutout US Route shields?

The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...