Skip to main content

I-74 in Charlotte?

Chris Curley sent me a sign goof photo from the Brookshire Freeway in Charlotte. Thought I'd post it for everyone in the blog to see. Apparently they are updating the exit signs and one of the signs for the Independence Blvd exit instead of having a US 74 shield, looks like this:
Now there are some people who would like to see an interstate from Charlotte to Wilmington, but right now the I-74 number is taken and is already on freeways more than 50 miles to the east. Bets on how long it will take NCDOT to fix this?

Comments

Adam said…
six months...most likely two years.
Alex said…
I love it, NCDOT can't even tell the difference between Interstate and U.S. 74. So why not overlap them together!
Ron said…
I'll agree with Adam...But somebody will have to stay on their backs to get it replaced. And you wonder why out-of-staters get such a big laugh at us!
Brandon said…
If they want an interstate so badly, there are numbers in the 30s that aren't used: I-32, 34, 36, and 38. Shoot, I-38 would be funny, given California's use of an I-x38 3di.
Da-ud said…
Hmmm, and a couple months ago John Lansford told me I was an idiot to suggest that motorists would ever have a problem differentiating between I-74 and US 74 as they split near Rockingham.

Hell, if NCDOT can't even tell the difference, as this sign shows.... I think I just had my point strongly proven.
Anonymous said…
I was hoping this would still be there when i visited charlotte, but as of 2nd week in july it was patched over.
Anonymous said…
Dang, NCDOT's roads are very confusing. in Greensboro there are like a million alternate ways and I-74 Just bounces all over the city.

Popular posts from this blog

The Dummy Lights of New York

  A relic of the early days of motoring, dummy lights were traffic lights  that  were  placed  in the middle of a street intersection. In those early days, traffic shuffled through busy intersections with the help of a police officer who stood on top of a pedestal. As technology improved and electric traffic signals became commonplace, they were also  originally  positioned on a platform at the center of the intersection. Those traffic signals became known as  " dummy lights "  and were common until  traffic lights were moved  onto wires and poles that crossed above the intersection.  In New York State, only a handful of these dummy lights exist. The dummy lights  are found  in the Hudson Valley towns of Beacon and Croton-on-Hudson, plus there is an ongoing tug of war in Canajoharie in the Mohawk Valley, where their dummy light has been knocked down and replaced a few times. The dummy light in Canajoharie is currently out of commission, but popular demand has caused the dummy

Colorado Road (Fresno County)

Colorado Road is a rural highway located in San Joaquin Valley of western Fresno County.  Colorado Road services the city of San Joaquin in addition the unincorporated communities of Helm and Tranquility.  Colorado Road was constructed between 1910 and 1912 as a frontage road of the Hanford & Summit Lake Railway.  The roadway begins at California State Route 145 near Helm and terminates to the west at James Road in Tranquility.   Part 1; the history of Colorado Road Colorado Road was constructed as frontage road connecting the sidings of the Hanford & Summit Lake Railway.  The Hanford & Summit Lake Railway spanned from South Pacific Railroad West Side Line at Ingle junction southeast to the Coalinga Branch at Armona.  The Hanford & Summit Lake Railway broke ground during August 1910 and was complete by April 1912. The Hanford & Summit Lake Railway established numerous new sidings.  From Ingle the sidings of the line were Tranquility, Graham, San Joaquin, Caldwell, H

Madera County Road 400 and the 1882-1886 Yosemite Stage Road

Madera County Road 400 is an approximately twenty-four-mile roadway following the course of the Fresno River in the Sierra Nevada Mountains.  Road 400 begins at California State Route 145 near Madera and terminates to the north at Road 415 near Coarsegold.  Traditionally Road 400 was known as "River Road" prior to Madera County dropping naming conventions on county highways.  Road 400 was part of the original Yosemite Stage Route by the Washburn Brothers which began in 1882.  The Yosemite Stage Route would be realigned to the west in 1886 along what is now Road 600 to a rail terminus in Raymond.  Parts of Road 400 were realigned in 1974 to make way for the Hensley Lake Reservoir.  Part 1; the history of Madera County Road 400 Road 400 is historically tied to the Wawona Road and Hotel.  The Wawona Hotel is located near the Mariposa Grove in the modern southern extent of Yosemite National Park.   The origins of the Wawona Road are tied to the Wawona Hotel but it does predate th