Skip to main content

California State Route 41; The 2 Lane Death Trap Corridor

California State Route 41 north from the Kings County/Fresno County Line at Excelsior Avenue to Postmile FRE 6.00 at Elkhorn Avenue consists of substandard two lane expressway serving as a gap from two modern four lane facilities.  In recent months the Excelsior Avenue-Elkhorn Avenue segment of California State Route 41 has obtained infamy due to it's high number of accidents which led to the corridor obtaining the nickname of "The 2 Lane Death Trap."  As of August 7th, 2021 the Excelsior Avenue-Elkhorn Avenue segment of California State Route  41was converted to the first centerline K-Rail barrier two lane State Highway in Caltrans District 6.  


Part 1; the history of The 2 Lane Death Trap corridor of California State Route 41

As noted in the Gribblenation Blog titled "Old California State Route 41 in southern Fresno County" the segment of highway from Excelsior Avenue north to Elkhorn Avenue was added to the State Highway System in 1933 as part of Legislative Route Number 125 ("LRN 125").  As originally plotted LRN 125 ran north from Lemoore in Kings County north via 19th 1/2 Avenue to Excelsior Avenue at the Fresno County Line.  LRN 125 northbound jogged briefly easterly on Excelsior Avenue to Elm Avenue.  LRN 125 would follow Elm Avenue northward to Elkhorn Avenue.  LRN 125 followed another brief eastward jog to a second segment of Elm Avenue which it followed north to the City of Fresno.  LRN 125 between Lemoore and Fresno would be assigned as part of California State Route 41 ("CA 41") when the Sign State Routes were announced in the August 1934 California Highways & Public Works.  



CA 41 can be seen on the 1935 Division of Highways Map of Fresno County aligned on Elm Avenue north from Excelsior Avenue (shown as Parkhurst Avenue) via Camden to Elkhorn Avenue (shown as Dodge Avenue).  


The State Highway network around Lemoore began to see major modernization efforts following the construction of Naval Air Station Lemoore in 1961.  Both CA 198 and CA 41 largely slated to be modernized within the vicinity of Lemoore either to freeway or expressway standards.  By 1964 a two lane expressway segment of CA 41 was built via a diagonal line from Excelsior Avenue north to Elkhorn Avenue.  This diagonal two lane expressway grade of CA 41 bisected the former alignment of Elm Avenue and reconnected back to it at Elkhorn Avenue.  The new diagonal two lane expressway would serve as the beginning of a four lane expressway which would eventually bypass Lemoore and connect to the CA 198 freeway by 1998.  The 1965 Division of Highways Map displays the new Excelsior Avenue-Elkhorn Avenue alignment of CA 41.  


In 2004 CA 41 south from the Fresno City Limit to Elkhorn Avenue was completed to four lane expressway standards.  The Excelsior Avenue-Elkhorn Avenue segment of CA 41 would remain a two-lane expressway connecting to the second four lane segment approaching Lemoore.  The two-lane Excelsior Avenue-Elkhorn Avenue segment of CA 41 would subsequently become a choke point for the increasing traffic traveling from Fresno and Lemoore.  The expanded expressway segment of CA 41 south of Fresno can be seen on the 2005 Caltrans State Map.  


The Excelsior Avenue-Elkhorn Avenue segment of CA 41 would become a major choke point and was particularly hazardous during Tule Fog in the winter months.  CA 41 between Excelsior Avenue-Elkhorn Avenue would see 260 accidents over a five year period approaching 2020.  During early 2021 the passing zone center stripes in the Excelsior Avenue-Elkhorn Avenue would be converted to a single no-passing zone.  Between August 2nd-August 7th, 2021 the Excelsior Avenue-Elkhorn Avenue segment of CA 41 became the first two lane segment of State Highway in Caltrans District 6 to have a center K-Rail installed.  



Part 2; a drive along the newly installed K-Rail barriers in The 2 Lane Death Trap corridor of California State Route 41

During the weeks prior to the K-Rail installation the center stripe configuration of CA 41 in the Excelsior Avenue-Elkhorn Avenue were widened to accommodate installation. 



As CA 41 northbound approaches the Fresno County Line at Excelsior Avenue it drops to two lanes where the first K-Rail barrier can be found. 










The first K-Rail on CA 41 northbound gives away approaching Laguna Avenue at Postmile FRE R1.01.




A second K-Rail on CA 41 north of Laguna Avenue begins and gives way at Mountain Whitney Avenue in Camden at Postmile FRE R2.03.






A third K-Rail segment of CA 41 begins north of Mount Whitney Avenue and gives way to another turn lane at Harlan Avenue located at Postmile FRE R3.04. 






A fourth and final K-Rail segment of CA 41 begins north of Harlan Avenue.  At Postmile R3.5 CA 41 crosses Murphy Slough where the K-Rail installation has rendered the shoulder narrow.  The K-Rail installation on CA 41 between Excelsior Avenue and Elkhorn Avenue included a gravel extension of the shoulders.  




The fourth K-Rail barrier on CA 41 northbound gives way at Postmile FRE R6.0 at Elkhorn Avenue. 






As CA 41 north of Elkhorn Avenue expands back out to four lanes an incomplete stub of the Excelsior Avenue-Elkhorn Avenue two lane segment can be observed on the right.  







Comments

Matt Wiser said…
The Fresno Bee, in its 17 March 2022 issue, reported that State Funding has been approved for a project to turn the two-lane road into a four-lane expressway, and thus complete Hwy. 41 as four lanes between Fresno and Hwy. 198.

https://www.fresnobee.com/news/local/article259462334.html

No timeframe yet for construction to begin, however.

Popular posts from this blog

North Carolina Continues to Move Forward with Rail

2023 and the first half of 2024 have seen continued growth in North Carolina's passenger rail system.  From increased daily trains from Raleigh to Charlotte, federal funds for studying additional corridors, and receiving a historic grant to begin the construction of high-speed rail between Raleigh and Richmond, the last 18 months have been a flurry of activity at NCDOT's Rail Division.  And that's just the tip of the iceberg. As ridership and routes increase - the engine of North Carolina passenger rail trains will become a more common sight. (Adam Prince) Increased Passenger Train Service: On July 10, 2023, a fourth Piedmont round-trip rail service between Raleigh and Charlotte commenced.  The four Piedmont trains plus the daily Carolinian (to Washington, DC, and New York) bring the total of trains serving the two cities daily to five. The current daily Piedmont and Carolinian schedule between Charlotte and Raleigh (NCDOT) The result was over 641,000 passengers utilized pa

US Route 101 in Benbow, Garberville and Redway

The communities of Benbow, Garberville and Redway can all be found along US Route 101 within southern Humboldt County.  The former surface alignment of US Route 101 in Garberville and Redway once crossed the Garberville Bluffs along what is now Redwood Drive via a corridor constructed as part of the Redwood Highway during the 1910s.  US Route 101 through Benbow, Garberville and Redway was modernized by 1935.  US Route 101 would eventually be upgraded to freeway standards in Benbow, Garberville and Redway by extension of the Redwood Freeway during 1966-68.  As the cover photo the original grade of US Route 101 and the Redwood Highway can be seen at the Garberville Bluffs during 1934.  US Route 101 can be seen in the communities of Benbow, Garberville and Redway on the 1935 Division of Highways Map of Humboldt County .   The history of US Route 101 in Benbow, Garberville and Redway Benbow, Garberville and Redway lie on the banks of the South Fork Eel River of southern Humboldt County.  D

The Midway Palm and Pine of US Route 99

Along modern day California State Route 99 south of Avenue 11 just outside the City limits of Madera one can find the Midway Palm and Pine in the center median of the freeway.  The Midway Palm and Pine denotes the halfway point between the Mexican Border and Oregon State Line on what was US Route 99.  The Midway Palm is intended to represent Southern California whereas the Midway Pine is intended to represent Northern California.  Pictured above the Midway Palm and Pine can be seen from the northbound lanes of the California State Route 99 Freeway.   This blog is part of the larger Gribblenation US Route 99 Page.  For more information pertaining to the other various segments of US Route 99 and it's three-digit child routes check out the link the below. Gribblenation US Route 99 Page The history of the Midway Palm and Pine The true timeframe for when the Midway Palm and Pine (originally a Deadora Cedar Tree) were planted is unknown.  In fact, the origin of the Midway Palm and Pine w