Skip to main content

Details of the NC68/US 220 I-73 connector

NCDOT was gracious to send me their plans of the proposed NC 68/US 220 Connector that will one day carry Interstate 73. The blog's Bob Malme also attended tonight's public workshop and was able to get additional details on the project and will be included below.

First, the entire project is 13 miles in length and will consist of three segments. The connector, which will be built totally on a new alignment, is approximately 8.5 miles in length and will be built to Interstate standards and a 70 mph design speed. Previously, it was thought that the road would be built just short of Interstate grade and upgrades made over time, but that is no longer the case.

The Connector itself is broken down into two sections (A & B). Going west(South I-73) to east (North I-73), there will be interchanges at NC 68, NC 150 in Summerfield and US 220.

Under the original plan, Interstate 73 was to follow NC 68 South to Interstate 40. But those plans have changed, I-73 will briefly bump NC 68 before turning south and east to connect with Bryan Blvd. near Piedmont-Triad International Airport. From there, I-73 will follow Bryan Blvd. until joining the Greensboro Urban Loop/I-840.

The change to the routing of I-73 has drastically changed how I-73 intersects NC 68. The new plans have the NC 68/I-73 interchange that will include flyovers that will carry I-73 South traffic over NC 68 as it heads towards Bryan Blvd.

Bob, who was able to see much larger versions of the plans in person, explains, "[I-73] from Bryan Blvd. will meet NC 68 south of the Connector, but they probably won't run together more than half a mile northbound and less southbound where a flyover ramp will take I-73 over NC 68 in the vicinity of today's Sedgefield Road intersection and have it merge about a 1/4 mile further south. The part of NC 68 that will be I-73 and the Connector will be built to 70 MPH/Interstate standards with 2 lanes in each direction."

Figure 1. The I-73 Connector tie in with NC 68. I-73 North will run left to right. (Larger pdf file accessible here.)

Figure 2. The I-73 Connector east of NC 68. I-73 North will run left to right. (Larger pdf file accessible here.)

Figure 3. The I-73 Connector continues east towards US 220. I-73 North will run left to right. (Larger pdf file accessible here.)

The connector ends at a partial interchange with US 220 just south of the Haw River. Bob describes the partial interchange, "The interchange will feature a flyover for US 220 South which will go over the river and I-73 as it turns right onto the Connector, there will be no access from US 220 North to I-73 South, I-73 North will just meet 220 on its current path."

Figure 4. After a diamond interchange with NC 150, the connector ends with a partial interchange with US 220 as I-73 turns north. (Larger pdf file accessible here.)


From there, Section C of the project begins. Section C will build a four lane limited access highway northwards paralleling the current two lane US 220. The project length is 4.5 miles and is currently built to a 60 mph design speed. According to Bob's discussions with Section C project engineers this evening, "Since no federal money is [currently] involved, it will be built as initially as a 60 MPH speed limited access highway, with interchanges for NC 65 and US 158 (which already exists) and NC 68 at the northern end (could not tell if you could access 68 from north I-73). They hope to get federal funds once the Connector construction is underway in 2014 to upgrade the road to interstate status by the time the Connector is finished around 2017."

Construction on the connector is scheduled to begin in 2014 with completion by 2017.

For more details:
Residents can review N.C. 68 connector plan ---Greensboro News&Record
Interstate 73 Progress Page - Sections 2 & 3 ---Bob Malme

Comments

James Mast said…
"Figure 1. The I-73 Connector tie in with I-68. I-73 North will run left to right. (Larger pdf file accessible here.)"

I think you ment NC-68 instead of I-68. lol.
Adam said…
Thanks! Blogging so much that I-68 and NC 68 starts to run together!

Popular posts from this blog

Old River Lock & Control Structure (Lettsworth, LA)

  The Old River Control Structure (ORCS) and its connecting satellite facilities combine to form one of the most impressive flood control complexes in North America. Located along the west bank of the Mississippi River near the confluence with the Red River and Atchafalaya River nearby, this structure system was fundamentally made possible by the Flood Control Act of 1928 that was passed by the United States Congress in the aftermath of the Great Mississippi River Flood of 1927 however a second, less obvious motivation influenced the construction here. The Mississippi River’s channel has gradually elongated and meandered in the area over the centuries, creating new oxbows and sandbars that made navigation of the river challenging and time-consuming through the steamboat era of the 1800s. This treacherous area of the river known as “Turnbull’s Bend” was where the mouth of the Red River was located that the upriver end of the bend and the Atchafalaya River, then effectively an outflow

Memphis & Arkansas Bridge (Memphis, TN)

  Like the expansion of the railroads the previous century, the modernization of the country’s highway infrastructure in the early and mid 20th Century required the construction of new landmark bridges along the lower Mississippi River (and nation-wide for that matter) that would facilitate the expected growth in overall traffic demand in ensuing decades. While this new movement had been anticipated to some extent in the Memphis area with the design of the Harahan Bridge, neither it nor its neighbor the older Frisco Bridge were capable of accommodating the sharp rise in the popularity and demand of the automobile as a mode of cross-river transportation during the Great Depression. As was the case 30 years prior, the solution in the 1940s was to construct a new bridge in the same general location as its predecessors, only this time the bridge would be the first built exclusively for vehicle traffic. This bridge, the Memphis & Arkansas Bridge, was completed in 1949 and was the third

California State Route 203 the proposed Minaret Summit Highway

California State Route 203 is an approximately nine-mile State Highway located near Mammoth Lakes in the Sierra Nevada Mountains of Mono County.  California State Route 203 as presently configured begins at US Route 395, passes through Mammoth Lakes and terminates at the Madera County line at Minaret Summit.  What is now California State Route 203 was added to the State Highway System in 1933 as Legislative Route Number 112.  The original Mammoth Lakes State Highway ended at Lake Mary near the site of Old Mammoth and was renumbered to California State Route 203 in 1964.  The modern alignment of the highway to Minaret Summit was adopted during 1967.   The corridor of Minaret Summit and Mammoth Pass have been subject to numerous proposed Trans-Sierra Highways.  The first corridor was proposed over Mammoth Pass following a Southern Pacific Railroad survey in 1901.  In 1931 a corridor between the Minarets Wilderness and High Sierra Peaks Wilderness was reserved by the Forest Service for po