Skip to main content

More NC Highway Oddities on the way - Hello NC 36 and a Split NC 42

Image
By

North Carolina is building a lot of new Interstates - personally, there are too many to keep track of - so we have Bob for that.  But as a result of new highways and new highway numbers, there's going to be conflict.

And that's the case with NC 42 and the soon-to-be-signed Interstate 42 in Johnston County.

Concerned about driver confusion and safety and first responder response, NCDOT has proposed that a small segment of NC 42 in Johnston County be redesignated as NC 36.  The new NC 36 designation would follow the existing NC 42 from NC 50 in Cleveland to the current US 70 Business east of Clayton.

When the US 70 corridor from Clayton east to Morehead City was approved as an Interstate nearly a decade ago, North Carolina requested Interstate 36 for the corridor.  Part of the reason was that the I-36 designation would not conflict with any existing state highways.  Unfortunately, the American Association of State Highway & Transportation Officials (AASHTO) disagreed.  They recommended Interstate 42 - as the newly designated corridor would run north of Interstate 40.  NCDOT accepted the ruling, and as a result, the conflict of two routes that would intersect each other and I-40 within miles of each other.

NC 36 will be routed through Clayton bridging the two NC 42's.

The plan to renumber NC 42 through Clayton should resolve that.  However, I believe the NC 36 change should continue eastwards to Wilson.  The reason is that NC 42 and Interstate 42 will intersect Interstate 95 about 19 miles from each other.  That's close enough, in my opinion, to continue with driver confusion for long-distance travelers along I-95.  I left a comment with NCDOT with my suggestion.  Will they listen to me? Stay tuned.

More Changes:

In addition to renumbering NC 42 through Clayton, NCDOT has proposed eliminating US 70 Business through Clayton and replacing it (or re-replacing it) with vanilla US 70 - or what used to be signed through the area until the Clayton Bypass opened 15 years ago.

The signage for Exit 306 will need to change.  Business US 70 East - will now be simply US 70 East.

This change will now eliminate the bried US 70/Interstate 40 multiplex between exits 306 and 309.  Exit 309 - the Clayton Bypass - will now be only Interstate 42.

NCDOT estimates that the changes will be signed in about a year.

The Local 4042 Nominclature:

Exit 312 - known locally as '4042' - will now be for NC 36.

For nearly 40 years, Exit 312 on Interstate 40 was known as '4042' by local residents.  As Johnston County grew, the 4042 interchange area added new restaurants, hotels, services, and of course traffic.  The interchange has been redesigned a few times. A current construction project is giving the interchange a total makeover - it will now become a Diverging Diamond Interchange (DDI) and a new interchange for nearby Cleveland Road is being built to take some of the pressure off the area.

The interchange was so well known that a local community news and information website was named after it - 4042.com.  In 2015, 4042.com became JohnstonCounty.today.

It will be interesting with Exit 309 being the new 40/42 interchange - what locals may now call Exit 312 - '4036' does work.

Sources & Links:

Labels:

Comments

Anonymous said…
This is kind of amusing since that whole I-74/US 74 thing never bothered NCDOT.
5:17 PM
Anonymous said…
Just today coming from Smithfield toward Clayton, I again got confused with the signage and ended up taking the wrong side. Next time I will park my motorcycle in the "Y" of the intersection; get off; and look over the bridges to find my desire route. I am really ashamed of NC's handling of this intersection.
5:42 PM
Post a Comment

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

By
The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...
3 comments
Read more

Hawaii Route 50

By
Hawaii Route 50 is the longest Sign Route on the island of Kauai at 32.6 miles.  The entirety of Hawaii Route 50 is overlaid atop Kaumualii Highway from Lihue west to the Pacific Missile Range Facility at Barking Sands. Hawaii Route 50 is one of the original 1955-era State Highway designations on Kauai.  Much of the Kaumualii Highway corridor was constructed during the sugar plantation boom of the late Hawaiian Kingdom.  The first tee beam bridge in Hawaii would be constructed along the Kaumualii Highway in 1911 at the Hanapepe.  Much of this highway would be modernized to two-lane standards through the 1930s and 1940s. This page is part of the Gribblenation Hawaii Roads series.  A compellation of all Hawaii-related media from both Gribblenation and RoadwayWiz can be found by clicking  here .  Part 1; the history of Hawaii Route 50 and Kaumualii Highway Hawaii Route 50 is the longest highway on Kauai at 32.6 miles.  The highway begins at Rice Str...
Post a Comment
Read more

Ghost Town Tuesday; Nichols, FL

By
A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida.  One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region.  For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate.  Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century.  Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area.  The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...
4 comments
Read more