Skip to main content

Hey look it's I-795, and I-74/US 74, and Future I-73/74!

Bob Malme, Dave Filpus and I took a roadtrip checking out the most recent news in Eastern and Central NC Interstates today. In other words, we went to see if I-795 was signed, the recently opened I-74 in Maxton, and some of the construction of the Ellerbe Bypass.

Route: I-540, US 64, NC 39, US 264, I-795, US 117, US 13, I-95, NC 711, I-74/US 74, US 74, US 1, US 220, NC 211, NC 705, NC 24/27, US 15/501, US 1, I-440.

So is I-795 signed?

Well yes, it is. The signs were put up on Wednesday, November 28th. Interestingly, all the US 117 sign have been removed from the 795 freeway. At some interchanges, there are still US 117 shields. Obviously the overheads aren't updated to reflect the change. There is one hiccup. Where I-795 splits from US 264 to head south to Goldsboro, it is not marked at all. So if you stay East on US 264 expecting to be on I-795, you'll be like "Hey, where did 795 go?" I am sure this will be fixed once the guides and overheads are updated.

There are also END signs like below at both termini. We didn't notice any 'BEGIN' signs.


Also, Alternate banners are still up on US 117. However in some cases, the Alternate banners were never added so it won't be that big of a change on what is now once again US 117. The only question, where will 117 end now. Most likely US 301.

NC 711 ends at I-95 while multiplexed with NC 72 for about a quarter of a mile. Also, NC 711 is signed North/South when it clearly goes East/West. Makes no sense.

So it was off to the new six mile section of I-74 from Maxton to NC 710. And well...It's I-74 and US 74. We've seen Future I-74 and US 74 shielded at the same time...but never Interstate 74 and US 74 shields until now.





Right now, the new six miles of I-74/US 74 is posted at 55 mile an hour. It is primarily open for 'Local Traffic Only' at this point. We'll see what happens come vacation season though. 74 is a key route from Charlotte to the beaches.

Here's a look at the unopened I-74/US 74 East past the NC 710 interchange.



Exits are based on I-74 mileage and the milemarkers have I-74 shields only. Interesting if you are headed eastbound at the end of the former Maxton Bypass. You are forced back on the old two lane US 74. If you want to continue on the six miles of freeway to NC 710. You basically need to take a U-Turn at the end of the on-ramp to get back on the highway.

Speaking of that interchange. You got to love signs like these:

Surprisingly, Interstate 74 shields, milemarkers, and exit numbers continue beyond the newly opened highway to the end of the Laurinburg Bypass. We didn't think that the new signs would have been posted already. Signing plans call for the not quite to exact Interstate standards freeway to be signed as an Interstate. And obviously, they've already been done. I-74 shields are through out the Laurinburg/Maxton bypass and also on surface streets at the interchanges. Most of the exit gore signs read with I-74 exit numbers, as do most of the guides. A few guides need I-74 exit tabs and that's it.

And there is even an 'END' I-74 shield at the eastern end of the freeway.

And I-74 shields have been added onto overheads and guide signs at the beginning of the freeway as well.

From there, it was on to check out some construction progress on the I-73/74/US 220 Ellerbe Bypass. A couple of surprises are found here.

First, it appears that NC 73 will not be routed on the new freeway. It is most likely going to continue on what is now US 220 (which will become either US 220 Alternate or Business or both). And here's proof of why.

First, the exit numbers are based on US 220 mileage. However, there are a few clues. First, the guide sign only reads NC 73 (without any East/West). Second around the interchange there are new NC 73 shields located west of the interchange, meaning NC 73 would not go on the freeway.

Finally, shown below, there is not an NC 73 West shield on the guide signs used for shields on the new highway. This shot was taken from a distance at max zoom so it is a little bit sketchy.

There isn't an NC 73 shield on this guide. But also take note that it reads 'FUTURE' I-73 and 'FUTURE' I-74. This is interesting as most thought the highway would be INTERSTATE 73/74 at this point. The reason is that the freeway to the north that the new highway will connect to is already signed as INTERSTATE 73 INTERSTATE 74. So we'll see what happens.

As a whole, a worthwhile field research trip with a few surprises. It will be interesting to see what happens when the Ellerbe bypass opens if the currently signed I-74/74 to the North changes to Future. Or if Future 73/74 changes. Also, what exactly happens to NC 73. IS my guess that it won't go on the new freeway right? We shall see, the freeway is supposed to open next Spring.

If you made it this far, take some time and read Bob Malme's I-73/74 pages. It gives an accurate and in depth look at the progress of both Interstates in North Carolina.

Comments

Anonymous said…
I gotta hand it to NC, they're the last place that actually is still building new highways to keep up with development, unlike other places where suburbs keep going, and 2 lane roads are overcloged and widening is impossible
Steve A said…
What a horrible clusterfuck... US 74/I-74, NC 73/I-73, bypasses that don't connect to each other... can't the government just let FHWA do its job anymore?
Anonymous said…
There is a statement that needs a little clarification (below), you can do that, however, if you take the exit before it which is the 'A' and not the 'B' it will lead up to the Business 74 as well. But you can drive straight across and be on the On Ramp for the other 6 miles.

(You basically need to take a U-Turn at the end of the on-ramp to get back on the highway.)
Anonymous said…
On another note:
NC wants to route I-74 off US74 through an expensive-to-build-on marshland to Myrtle Beach. Environmentally it will be years to get it passed.
It really should be routed to Wilmington which is better for the state. Wilmington is adding more cargo ports and will need better routes to Charlotte.

Looking at the area, I-73 will already serve Myrtle Beach. This is useless duplication at a horrible expense. But then does anyone at the DOT or politics know what they are doing?

(SC refuses to continue I-20 from Florence to Wilmington due to reducing/losing their beach revenue to NC). So again why should be build an interstate to their beach and not ours?

Popular posts from this blog

West Canyon Road (Snow Canyon State Park)

West Canyon Road is an approximately four-mile dirt service road located in Snow Canyon State Park.  West Canyon Road follows Snow Canyon from the Whiptail Trail to the northern State Park boundary and intersects numerous trailheads.   West Canyon Road was the original main road through Snow Canyon after it was designated as a Utah State Park in 1957 and opened to the public in 1962. Part 1; the history of West Canyon Road Snow Canyon is located in the Red Mountains north of the city of Ivins in Washington County, Utah.  Snow Canyon is one of many sandstone canyons located in the Red Mountains.  Part of the extinct Santa Clara Volcano punctured the Red Mountains via lava tubes. From approximately the year 200 to 1,250 the area around Snow Canyon was inhabited by the Ancestral Puebloans.  Mormon pioneers established Santa Clara south of Snow Canyon in 1854.  Local legend has it that the settlers discovered Snow Canyon in the 1850s while searching for m...

Indian Gulch Extension and the Indian Gulch ghost town site

Indian Gulch Extension is an approximately 6-mile-long rural highway corridor in the Sierra Nevada foothills of western Mariposa County.  Indian Gulch Extension begins at Indian Gulch Road near the namesake ghost town of Indian Gulch.  From the ghost town site Indian Gulch Extension extends southwesterly to the Merced County line where it becomes Waltz Road.   The former Gold Rush era community of Indian Gulch which was settled near Santa Cruz Mountain in 1849 and had standing structures until the early 1970s.  What is now Indian Gulch Extension was approved for construction by the Mariposa County Commissioners in 1862.  The purpose of the corridor was to provide Indian Gulch with a direct connection westward with the greater Stockton-Los Angeles Road.  The Stockton-Los Angeles Road would go onto define much of the Mariposa County and Merced County line.  Part 1; the history of Indian Gulch and Indian Gulch Extension Indian Gulch Road is named aft...

The reemergence of US Route 99 at the Ventura Freeway/Golden State Freeway interchange

During April 2023 a portion of the sign gantry on the eastbound Ventura Freeway (California State Route 134) approaching the Golden State Freeway (Interstate 5) fell.  The fallen portion of the sign gantry revealed a once covered US Route 99 shield.  The uncovered US Route 99 sign (blog cover courtesy Ian Ligget) is a 1956-63 era freeway specification US Route shield.  This blog will explore in brief how the Golden State Freeway was developed as US Route 99 and US Route 6 before becoming solely Interstate 5.   This blog is part of the larger Gribblenation US Route 99 Page.  For more information pertaining to the other various segments of US Route 99 and it's three-digit child routes check out the link the below. Gribblenation US Route 99 Page Part 1; visiting the US Route 99 shield at the Ventura Freeway/Golden State Freeway Interchange As noted in the introduction the US Route 99 shield can be seen on the eastbound Ventura Freeway (California Sta...