Skip to main content

Bonds Flat Road


Bonds Flat Road is an approximately six-mile highway in the Sierra Nevada foothills of Tuolumne County near La Grange.  The roadway crosses New Don Pedro Dam and was opened to traffic in 1971 following completion of said structure.  The corridor begins at La Grange Road (County Route J59) and terminates at California State Route 132.  




Part 1; the history of Bonds Flat Road

Bonds Flat Road was constructed as part of the New Don Pedro Dam project.  The roadway is one of the pieces of nearby infrastructure not named after the famed California Gold Rush figure Don Pedro Sainevain.  An undated public domain photo of Sainsevain can be seen below.  


Sainsevain was born on November 20, 1818, in Béguey, France.  He would arrive in Santa Barbara of then Mexican Alta California during July 1839.  Sainsevian was a carpenter by trade and was sent to find his uncle in Los Angeles.  He would initially settle near downtown Los Angeles where he became a prominent figure in the coastal wine industry.  

Through the 1840s Sainsevain would diversify his business interests by way of becoming involved sawmills, flour mills, ship building and mining.  In 1848 would visit Coloma in the buildup to the larger California Gold Rush and would establish Don Pedro Bar on the banks of the Tuolumne River.  In 1849 Sainsevain would soon divest of his mining interests and would move to Stockton where he found a profitable business selling wine to Gold Rush miners.  

Sainsevian would be later involved in the construction of California's first State House and was a delegate at the California Constitutional Convention in Monterey.  He would remain successful in the California wine industry until leaving the state for France in 1883 following the death of his wife.  Sainsevain would die in France on October 4, 1904.  

Don Pedro Bar can be seen along the Tuolumne River northeast of La Grange on the 1873 Bancroft's map of California.  The original Don Pedro Road is shown along both sides of the Tuolumne River.


The site of Don Pedro Bar can be seen on the 1893 United States Geological Survey map of Sonora.  Don Pedro Road is shown to cross the Tuolumne River and connect to what is now Granite Springs Road.


The site of Don Pedro Bar would later be submerged during construction of Don Pedro Dam.  The original arch concrete dam was built near the town site along the Tuolumne River by the Modesto Irrigation District.  The dam was complete by 1924 and is 283 feet high. 

The original Don Pedro Dam can be seen in a 1925 era public domain photo.  


The 1935 Division of Highways map of Tuolumne County displays the completed Don Pedro Reservoir.  The dam site is shown to be accessible via road branching east from La Grange Road to Buzzards Point (now called Don Pedro Road on modern maps).  


In 1961 bonds were issued to expand the existing Don Pedro Reservoir.  The expansion required a new dam to be constructed downstream from the existing arch concrete structures.  After delays construction of the New Don Pedro Dam would commence with the spillways on August 29, 1967.  The new dam was an embankment design which topped out on May 28, 1970.  Old Don Pedro Dam was covered by rising waters on April 12, 1970.  

New Don Pedro Dam would be completed and dedicated in 1971.  The structure is 585 feet high and has length of 1,900 feet.  The embankment dam shas an installed 203-Megawatt Capacity.  Bonds Flat Road was constructed as an access road to the then new structure.  The roadway also served as a cutoff from La Grange Road (County Route J59) to California State Route 132. 




Part 2; a drive on Bonds Flat Road

Eastbound Bonds Flat Road begins at La Grange Road.  


Eastbound Bonds Flat Road passes the Blue Oaks Recreation Area and then over the Lake Don Pedro Spillway.  






Bonds Flat Road crosses over the top of New Don Pedro Dam.  Signage directs (and impedes) traffic not to stop on top of the dam.  







East of the dam Bonds Flat Road passes Fleming Recreation Area and terminates at California State Route 132.  








Comments

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...

May 2023 Ontario Trip (Part 3 of 3)

  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...

Abandoned Fowler Avenue in Clovis, California

Originally Fowler Avenue in the city of Clovis had a brief discontinuation approaching Herndon Avenue.  Fowler Avenue traffic heading northbound was required to detour briefly onto westbound Herndon Avenue.  During 2001 this discontinuation was removed when Fowler Avenue was reconfigured to access the Sierra Freeway (California State Route 168) via an interchange.  This led to a segment of the original alignment of Fowler Avenue just south of Herndon Avenue to be abandoned.  Despite a shopping center opening over part of the original Fowler Avenue alignment in 2016 much of the abandoned roadway remains.   The history of the abandoned original alignment of Fowler Avenue in Clovis The original alignment of California State Route 168 departed downtown Clovis eastbound along Tollhouse Road.  This original alignment did not interact with Fowler Avenue at the Herndon Avenue intersection.  Fowler Avenue north of Tollhouse Road ran north to Herndon Avenue...