Skip to main content

Former California State Route 106


California State Route 106 was a short lived post-1964 Sign State Route.  California State Route 106 was defined over what had been Legislative Route Number 190 between California State Route 38 near Redlands to California State Route 30 near Highland via Boulder Avenue and Orange Street.  California State Route 106 was consolidated into California State Route 30 via 1972 Legislative Chapter 1216. 



The history of California State Route 106

What was to become California State Route 106 (CA 106) entered the State Highway System during 1933 as part of Legislative Route Number 190 (LRN 190).  The original definition of LRN 190 was as follows: 

"LRN 9 (US Route 66) near San Dimas to LRN 26 (US Route 99) near Redlands via Highland Avenue." 

LRN 190 was not assigned one of the original Sign State Routes which were announced in the August 1934 California Highways & Public Works.  The future alignment of CA 106 appears on the 1934 Division of Highways Map as LRN 190 on Orange Street between Highland-Redlands.  


LRN 190 on Orange Street appears on the 1935 Division of Highways Map of San Bernardino County.  Between Highland Avenue and Orange Street the alignment of LRN 190 is shown making numerous jogs, including Baseline Street.  


The November/December 1947 California Highways & Public Works announced the construction and paving of a new bridge on LRN 190/Baseline Street had been budgeted for the 1948-49 Fiscal Year. 


A contract to construct the realignment of LRN 190 between Baseline Street and Orange Street was announced in the November/December 1948 California Highways & Public Works.  


The realignment of LRN 190 connecting Highland Avenue to Orange Street via Boulder Avenue appears on the 1950 Division of Highways Map.  


The January/February 1955 California Highways & Public Works announced a contract to expand LRN 190 between CA 30/LRN 207 to Baseline Street to a four-lane divided highway.  


An adopted freeway alignment for LRN 190 between Highland and Redlands was announced in the July/August 1963 California Highways & Public Works.  The Highland-Redlands Freeway alignment of LRN 190 was selected by the California Highway Commission during their May-June 1963 meetings.




As part of the 1964 State Highway Renumbering the Legislative Route Numbers were dropped in favor of field signage.  Legislative Route Numbers which didn't have Sign State Routes were assigned them.  In the case of LRN 190 between Highland and Redlands it was assigned as CA 106.  The original definition of CA 106 was "Route 38 near Redlands to Route 30 near Highland."  CA 106 appears for the first time on the 1964 Division of Highways Map.



CA 106 was short lived as 1972 Legislative Chapter 1216 transferred it to a realigned CA 30.  CA 30 can be seen replacing CA 106 between Highland and Redlands on the 1975 Caltrans Map.  

Comments

Popular posts from this blog

The rogue G28-2 California State Highway Spades

In this short blog we look at the somewhat rare but not unheard-of rogue G28-2 California State Highway Spades affixed to guide signs. Part 1; what is the G28-2 California State Highway Spade?  The  Caltrans Manual of Uniform Traffic Control Devices Sign Chart from 2014  ("Caltrans MUTCD") dictates the types of signs and highway shields permitted for traffic control use in California.  California is known for it's more ornate cut-out shields which are used for, US Routes, Interstate Highways, and State Routes.  These shields are intended to be applied as standalone reassurance signs but aren't explicitly limited to said function and occasionally appear in error on guide signs.  The common shields which are typically found through California are: US Route:  G26-2 Interstate:  G27-2 State Highway:  G28-2 The Caltrans MUTCD provides alternative shields for, US Routes, Interstate Highways, and State Routes.  These alternative shields are intended for guide sign usage.  Th

US Route 101 in Benbow, Garberville and Redway

The communities of Benbow, Garberville and Redway can all be found along US Route 101 within southern Humboldt County.  The former surface alignment of US Route 101 in Garberville and Redway once crossed the Garberville Bluffs along what is now Redwood Drive via a corridor constructed as part of the Redwood Highway during the 1910s.  US Route 101 through Benbow, Garberville and Redway was modernized by 1935.  US Route 101 would eventually be upgraded to freeway standards in Benbow, Garberville and Redway by extension of the Redwood Freeway during 1966-68.  As the cover photo the original grade of US Route 101 and the Redwood Highway can be seen at the Garberville Bluffs during 1934.  US Route 101 can be seen in the communities of Benbow, Garberville and Redway on the 1935 Division of Highways Map of Humboldt County .   The history of US Route 101 in Benbow, Garberville and Redway Benbow, Garberville and Redway lie on the banks of the South Fork Eel River of southern Humboldt County.  D

Patterson Pass Road

Recently on a day trip to the San Francisco Bay Area I traversed the Diablo Range eastbound via Patterson Pass Road. Patterson Pass Road is an approximately 13 mile roadway which starts at Mines Road in Livermore of Alameda County.  Patterson Pass Road eastward ascends over the approximately 1,600 foot namesake Patterson Pass into San Joaquin County where it ends at Interstate 580 near Tracy.  Patterson Pass Road has an infamous reputation as being a dangerous roadway due to the lengthy one-lane section and heavy rush-hour commute traffic. Patterson Pass is one of the earliest documented European paths of travel over the Diablo Range as it was explored during the 1775-1776 Spanish Expedition led by Juan Bautista de Anza.  The 1775-1776 Spanish expedition charted out much of San Francisco Bay which led to the founding of the Presidio of San Francisco and Mission San Francisco de Asis.  Patterson Pass Road between Cross Road east to Midway Road is part of the Juan Bautista de Anza