Skip to main content

Snake Alley - Burlington, Iowa

One of the crookedest streets in the United States of America is in a place that you may not expect. In Burlington, Iowa, a small city located on the banks of the Mississippi River, lies Snake Alley. This is a twisty, curvy street that descends (or ascends) a hill between the residential and commercial parts of the city, named for a snake due to the way the street meanders around the hill. The business district of Burlington is built in a natural amphitheater surrounded by hills. With all the commerce situated in the valley, transportation was extremely difficult for the residents living on the steep hills surrounding the downtown. Therefore, the citizens of Burlington citizens decided to try an experiment for travel between the residential and commercial areas of town.


In 1894, Snake Alley was constructed with an experimental street design, filled with switchbacks. It was planned and implemented by three local residents who were also engineers and paving contractors, Charles Starker, William Steyh and George Kriechbaum. These gentlemen were involved with developing the parks and projects of Burlington during that time period. In designing Snake Alley, they opted to replicate the vineyard paths found in France and Germany, as a nod to their German roots. The brick paving of Snake Alley is still the original brick that Kriechbaum provided in 1894.

Snake Alley is composed of tooled, curved limestone curbing and locally fired bricks. The constantly changing slants from one curve to the next required a complicated construction technique to keep the high grade to the outside. As a result, Snake Alley consists of five half curves and two quarter curves over a total distance of 275 feet, rising 58.3 feet from Washington Street at the bottom to Columbia Street at the top for a 21% grade. The craftsmanship and soundness of materials used in the construction of Snake Alley have made it a durable street. Today, the brick paving is actually still the original that was used in its construction over a hundred years ago.

In 1974, Snake Alley was nominated to the National Register of Historic Places. The homes that surround the street were standing before construction began, giving the street the appearance of an alley.  With its many twists and turns, Ripley’s Believe It, Or Not! has named Snake Alley unbelievably crooked and one of the most unbelievable, curious spots in America. Snake Alley rivals the famously crooked Lombard Street in San Francisco for the honor. Visitors are encouraged to travel this landmark and symbol of heritage, in Burlington by foot, bicycle, or motor vehicle. While I did not drive up or down Snake Alley when I visited, I saw one car attempt to drive down, and it looked like a tricky endeavor.

Snake Alley has some events and lore as well. There is a legend that the fire department used this alley to test horses. If a horse could take the curves at a gallop and still be breathing when it reached the top, the horse was deemed fit to haul fire wagons. Unfortunately, many teams of horses would run out of control or stumble over the limestone curbing, resulting in a broken limb. The street is the site of an uphill bike race, the Snake Alley Criterium, held every Memorial Day weekend, and the Snake Alley Art Fair is a Father's Day tradition.








How to Get There:



Sources and Links:
Burlington, Iowa - History, Heritage & Snake Alley
Travel Iowa - Snake Alley
Des Moines Register - Photos of Snake Alley in Burlington, the crookedest street in the world
Greater Burlington Partnership - Snake Alley

Comments

Anonymous said…
Dang I never knew there was a Lombard Street or a Vermont Street in Iowa.

Note its officially known as Snake Alley.
Anonymous said…
I guess I should have done some more homework before going to and through Burlington a few times in recent years. I also never knew it was there.
Anonymous said…
I grew up in Burlington Iowa and I love snake alley its part of alot of good and fabulous memories. Riding bikes ,taking nite walks .and trying to sled down it was really geese and scarey at the same time lots of goid memories....

Popular posts from this blog

The Tale of Tollhouse Road, western California State Route 168 and failed Piute Pass Highway

Western California State Route 168 is entirely located in Fresno County and is linked historically to the Tollhouse Road corridor.   Tollhouse Road is one of the oldest highways in the Sierra Nevada range of Fresno County. The corridor presently begins in at Clovis Avenue in downtown Clovis and extends northeast to Huntington Lake. In 1866 the Woods Brothers established mining claims on Pine Ridge. In 1867 Fresno County would grant the brothers a toll franchise to construct a roadway to the desirable logging areas atop Pine Ridge and near Dinkey Creek. The Woods would establish a tollhouse at the start of their franchise road and lumber mill. The lumber mill attracted settlers which led to the establishment of the mountain town of Tollhouse. Fresno County would purchase the Tollhouse Road in 1878 and make it a public highway. The county would remove the tolls and incorporate the corridor into the existing county road network. Prior to the establishment of Clovis in 1...

California State Route 73

California State Route 73 is 21 mile limited access highway aligned over the Corona del Mar Freeway and San Joaquin Hills Toll Road.  California State Route 73 connects Interstate 5 near San Juan Capistrano westward to Interstate 405 in Costa Mesa.  Prior to the construction of the Corona del Mar Freeway and San Joaquin Hills Tollway California State Route 73 was a surface highway located on largely MacArthur Boulevard. Part 1; the history of California State Route 73 What became California State Route 73 ("CA 73") entered the State Highway System in 1933 as Legislative Route Number 184 ("LRN 184").  LRN 184 was given the following route definition: "LRN 60 near Corona Del Mar to Santa Ana via Main Street" LRN 184 was announced in the April 1933 California Highways & Public Works .   LRN 184 appears for the first time on the  1934 Division of Highways Map .   LRN 184 appears under State Maintenance from US Route 101/LRN 2 in Santa Ana south ...

Mormon Emigrant Trail (Emergency US Route 50 Alternate)

Mormon Emigrant Trail is an approximately 24.5-mile portion of the original routing of the Carson Pass Highway in Eldorado National Forest.  Mormon Emigrant Trail begins at California State Route 88 near Alder Hill and extends westward to Eldorado County Route J16 at Sly Park Road.   Carson Pass was a known crossing of the Sierra Nevada by the Washoe and was surveyed in an 1844 expedition led by John C. Fremont.  The Carson Pass Highway was plotted as a wagon road by the Mormon Battalion in 1848 and was once the primary crossing of the Sierra Nevada.  By the 1880s the Carson Pass Highway had several spurs with the primary traffic corridor being rerouted to Jackson.  The original routing towards Placerville would come to be known as Morman Emigrant Trail and became part of Eldorado National Forest in 1910.  Morman Emigrant Trail is part of Forest Road 10N50 and Eldorado National Forest Route 5.  Despite being a seasonally maintained roadway corrido...