The Round Lake Bypass designation is...

The Round Lake Bypass designation is... under wraps.

For those not in the know, the Round Lake Bypass is currently being constructed in New York's Saratoga County as a way to bypass the Village of Round Lake and shuffle people to and from the chip fab plant that is being constructed in nearby Malta.

For a while now, a few roadgeeks interested in New York's roads have been wondering what the road will be designated as, whether it's a state touring route or a state reference route. Last week, I went to check up on the construction, and progress is going along well. The roundabout (near Interstate 87 / Adirondack Northway) between Curry Road (Saratoga CR 80) and the Round Lake Bypass has been completed, with just some minor work needing to be done on the bypass itself, with exception of the intersection with US 9 and NY 67. I also saw that some signs have been installed, on Curry Road itself, and that signs that could denote a possible route designation for the Round Lake Bypass is under a black tarp.

I am intending on stopping by the Round Lake Bypass again in a couple of weeks for a status update.

Comments

Anonymous said…

I heard it is going to be designated as 915J for a road number.

4:14 PM

I-40 rockslide uncovers old debates on highway

The Asheville Citizen-Times continues to do a great job covering all the angles of the Interstate 40 Haywood County rock slide. An article in Sunday's edition provides a strong historical perspective on how the Pigeon River routing of Interstate 40 came about. And perhaps most strikingly, in an article that ran just prior to the highway's opening in the fall of 1968, how engineers from both Tennessee and North Carolina warned "...that slides would probably be a major problem along the route for many years." On February 12, 1969, not long after the Interstate opened, the first rock slide that would close I-40 occurred. Like many other Interstates within North Carolina, Interstate 40 through the mountains has a history prior to formation of the Interstate Highway System and was also a heated political battle between local communities. The discussion for a road that would eventually become Interstate 40 dates back to the 1940's as the idea for interregional high

Interstate 210 the Foothill Freeway

The combined Interstate 210/California State Route 210 corridor of the Foothill Freeway is approximately 85.31-miles. The Interstate 210/California State Route 210 corridor begins at Interstate 5 at the northern outskirts of Los Angeles and travels east to Interstate 10 in Redlands of San Bernardino County. Interstate 210 is presently signed on the 44.9-mile segment of the Foothill Freeway between Interstate 5 and California State Route 57. California State Route 210 makes up the remaining 40.41 miles of the Foothill Freeway east to Interstate 10. Interstate 210 is still classified by the Federal Highway Administration as existing on what is now signed as California State Route 57 from San Dimas south to Interstate 10. The focus of this blog will mostly be on the history of Interstate 210 segment of the Foothill Freeway. Part 1; the history of Interstate 210 and California State Route 210 Interstate 210 (I-210) was approved as a chargeable Interstate during September of

Former California State Route 41 past Bates Station

When California State Route 41 was commissioned during August 1934 it was aligned along the then existing Fresno-Yosemite Road north of the San Joaquin River. Within the Sierra Nevada foothills of Madera County, the original highway alignment ran past Bates Station via what is now Madera County Road 209, part of eastern Road 406 and Road 207. Bates Station was a stage station plotted during the early 1880s at what was the intersection of the Coarsegold Road and Stockton-Los Angeles Road. The modern alignment bypassing Bates Station to the east would be reopened to traffic during late 1939. Part 1; the history of California State Route 41 past Bates Station Bates Station was featured as one of the many 1875-1899 Madera County era towns in the May 21, 1968, Madera Tribune . Post Office Service at Bates Station is noted to have been established on November 23, 1883 and ran continuously until October 31, 1903. The postal name was sourced from Bates Station owner/operator George Ba

Gribblenation

Search This Blog