Skip to main content

The Cambie Bridge (Vancouver, British Columbia)


The Cambie Street Bridge is a 3,600-foot-long girder span located in the city of Vancouver, British Columbia.  The current span opened to traffic on December 8, 1985, and is the third highway bridge at the crossing over False Creek.  The modern structure offers spectacular view of the downtown Vancouver skyline. 

The original Cambie Street Bridge opened in 1891 as private crossing of False Creek.  This timber designed structure proved inadequate as it crossed too low over False Creek.  The second Cambie Street Bridge would open during 1911 and was renamed as the Connaught Bridge in 1912.  The second structure included a swing span and generally was a much more adequate structure for the early automotive era.  The Connaught Bridge was closed during November 1984 to make way for construction of the current Cambie Bridge.  




Part 1; the history of bridges over False Creek via Cambie Street

Cambie Street and the Cambie Street Bridge are named in honor of Henry Cambie.  Henry Cambie was born in Ireland and emigrated to Canada in 1837.  Cambie worked in railroad engineering and construction in Nova Scotia.  During 1874 Cambie was sent to British Columbia to survey the feasibility of a railroad line through the mountains.

Henry Cambie was placed in charge of railroad construction through Fraser Canyon during 1881.  His efforts later saw him appointed Engineer-in-Charge of the western division of the Canadian Pacific Railway.  Cambie would construct a home in Vancouver in 1889 and would remain a resident of the city until his death in 1928. 

A photo of Henry Cambie from the Vancouver city archives. 


The original Cambie Street Bridge was a private venture at False Creek which broke ground during 1888.  The lumber for the timber trestle was supplied by the owners Leamy and Kyle.  The city of Vancouver in turn provided labor, engineering plans and iron to aid in the venture.  The original Cambie Street Bridge would open during July 1891 at a cost of $12,000 Candian dollars. 

The original Cambie Street Bridge can be seen below as it was circa 1904 (Vancouver city archives).  The original bridge had a rarely used draw span which was located ten feet above False Creek.  This structure was eventually turned over to the city of Vancouver and was made a public roadway. 


The original Cambie Street Bridge can be seen crossing False Creek on the 1906 Department of Interior map of Vancouver


The city of Vancouver had drafted preliminary plans to construct a high-level swing bridge over False Creek on July 8, 1909.  Construction of this bridge would begin on February 11, 1910.  While the high-level span was under construction the wooden falsework supporting it caught fire.  Ultimately there was little damage to the span, and it would open to the public on May 24, 1911.  The high-level swing bridge at False Creek cost approximately $823,500 Canadian dollars. 

Originally the second structure at False Creek was also known as the Cambie Street Bridge but it would be renamed as the "Connaught Bridge" by then Duchess of Connaught Princess Louise Margaret on September 12, 1912.  The renaming of was intended to honor the Duke of Connaught.  

During the morning of April 29, 1915, timber elements caught fire on the Connaught Bridge.  The fire caused a 90-foot section of the bridge to collapse before firefighters could get it under control.  The collapsed section can be seen below in a city of Vancouver city archives photo.  


The Connaught Bridge can be seen crossing False Creek on the 1914 Vancouver Map & Blue Company edition


The damaged section of the Connaught Bridge cost $90,000 Canadian dollars to repair.  The falsework trestle from the repairs can be seen still present on a May 26, 1923, photo (Vancouver Public Library) behind the central swing span.  


The Connaught Bridge can be seen below in a late 1940s photo from the Vancouver Public Library. 


The Connaught Bridge never carried a British Columbia Highway.  The span can be seen on the 1951 Shell street map of Vancouver


Vancouver city voters would approve a measure to construct the current Cambie Street Bridge on March 14, 1984.  A contract to build the planned 3,600-foot girder bridge was awarded by the city on April 24, 1984.   A closure ceremony for the Connaught Bridge took place November 18, 1984.  The British Columbia Regiment and motorcade of vintage cars attended the ceremony. 


The Connaught Bridge was demolished following the closure ceremony to make way for the current Cambie Bridge.  The new span included six lanes for automotive traffic and pedestrian walkways along both sides of structure.  These photos depict the Cambie Bridge under construction.  



The current Cambie Bridge opened to traffic on December 8, 1985, at a cost of $52,700,000 Canadian dollars.  This photo is from the cover of the Cambie Bridge opening ceremony which was presided over by Vancouver City Engineer C.H. Curtis. 


The Cambie Bridge can be seen facing north towards the Vancouver skyline below in a photo taken May 27, 1986, by Steve Morgan




Part 2; a drive on the Cambie Bridge

This photo tour of the Cambie Bridge was taken heading northbound from Broadway (British Columbia Highway 7) over False Creek into downtown Vancouver.  The downtown skyline has grown considerably since the current Cambie Bridge opened in late 1985.  As the bridge enters downtown northbound traffic transitions onto Smithe Street. 





















Comments

Popular posts from this blog

Abandoned Fowler Avenue in Clovis, California

Originally Fowler Avenue in the city of Clovis had a brief discontinuation approaching Herndon Avenue.  Fowler Avenue traffic heading northbound was required to detour briefly onto westbound Herndon Avenue.  During 2001 this discontinuation was removed when Fowler Avenue was reconfigured to access the Sierra Freeway (California State Route 168) via an interchange.  This led to a segment of the original alignment of Fowler Avenue just south of Herndon Avenue to be abandoned.  Despite a shopping center opening over part of the original Fowler Avenue alignment in 2016 much of the abandoned roadway remains.   The history of the abandoned original alignment of Fowler Avenue in Clovis The original alignment of California State Route 168 departed downtown Clovis eastbound along Tollhouse Road.  This original alignment did not interact with Fowler Avenue at the Herndon Avenue intersection.  Fowler Avenue north of Tollhouse Road ran north to Herndon Avenue...

What's In a Name?: When the Roads Really Do Tell a Story

  Our tagline on the Gribblenation blog is "because every road tells a story". Some roads tell different stories than others. Along our travels, we may see historic markers that tell us a little story about the roads we travel or the places we pass by. Some historic markers are more general, as to telling us who lived where or what old trail traversed between two towns. During my travels across New York State and other states or provinces, I pass by many historic markers, some with interesting or amusing references to roads. I wanted to highlight a few of the markers I've seen along my travels around the Empire State and help tell their stories. Those stories may be as specific as explaining the tales of a tree that was used to help measure a distance of eight miles from Bath to Avoca in Steuben County, as referenced on the Eight Mile Tree historical marker above. They may also help point the way along historical roads first used centuries ago, or may help tell a local l...

Hot Springs Drive (Tulare County Mountain Road 56)

Hot Springs Drive is an approximately twenty-mile rural highway in the Sierra Nevada foothills of Tulare County.  The Hot Springs Drive corridor begins at Old Stage Road at Fountain Springs and extends eastward to Parker Pass Road near California Hot Springs.  Hot Springs Drive is carried by Tulare County Mountain Road 56 and acts as an extension of Avenue 56 (Tulare County Route J22).   What is now California Hot Springs originated as the Deer Creek Hot Springs Resort in 1882.  The resort on Deer Creek was originally served by a Control Road which required traffic alternate at different times of the day.  The modern California Hot Springs resort would incorporate in 1905 following an ownership change.  The Control Road corridor was replaced by Hot Springs Drive around 1915 which intended to serve increasing amount of automotive traffic to California Hot Springs.  Much of the resort would later burn in 1968 but was rebuilt in the 1980s. ...