Skip to main content

Former California State Route 240


California State Route 240 was a short-lived State Highway designation applied during 1964 to the planned San Gabriel River Freeway south of California State Route 22 towards Seal Beach.  A small portion of California State Route 240 was opened to traffic during 1966 in the form of connecting ramps between the San Gabriel River Freeway and California State Route 22.  California State Route 240 was folded into the larger definition of Route 605 when the chargeable Interstate 605 corridor was shifted during 1968.  



Part 1; the history of California State Route 240

The origins of California State Route 240 are tied to the development of the San Gabriel River Freeway and Legislative Route Number 170 (LRN 170).  The original definition of LRN 170 was as follows:

"LRN 179 near Seal Springs via Santa Fe Springs to LRN 26 near West Covina."

The August 1934 California Highways & Public Works announced the initial run of Sign State Routes.  California State Route 35 was assigned completely concurrent with LRN 170 between US Route 99-60-70/LRN 26 in West Covina and California State Route 22/LRN 179 near Seal Beach.  



The November/December 1956 California Highways & Public Works noted the entire 23-mile corridor of the San Gabriel River Freeway/LRN 170 was adopted by the California Highway Commission on December 15, 1954.  



The corridor of LRN 170 was approved to become a chargeable Interstate on September 15, 1955.  On June 29, 1956, the Federal Highway Aid Act of 1956 was signed into law on the Federal Level.  The Federal Highway Aid Act of 1956 was the genesis point of the Interstate Highway System.

1957 Legislative Chapter 36 extended the definition of LRN 170 south to US Route 101A/LRN 60 near Seal Beach.  The segment of LRN 170 south of California State Route 22/LRN 179 was not included in the chargeable Interstate corridor of the San Gabriel River Freeway.  The extended definition of LRN 170 appears on the 1958 Division of Highways Map with no determined routing south of California State Route 22/LRN 179.  



The chargeable corridor of LRN 170 and the San Gabriel River Freeway was assigned Interstate 605 during the late 1950s.  During the 1964 State Highway Renumbering the original California State Route 35 was decommissioned and repurposed over what was California State Route 5 in the Santa Cruz Mountains.  The entirety of LRN 170 and the San Gabriel River Freeway was broken up into three designations.  Chargeable Interstate 605 was defined as being aligned from "Route 405 to Route 10 near the San Gabriel River."  The planned San Gabriel River Freeway south of Interstate 405 to California State Route 1 was reassigned as California State Route 240.  The planned San Gabriel River Freeway north of Interstate 10 to Interstate 210 and the Foothill Freeway was assigned as California State Route 243.  Interstate 605, California State Route 240 and California State Route 243 all appear on the 1964 Division of Highways Map.  The previous surface route of the original California State Route 35 is shown be temporarily designated as LRN 605.  







The November/December 1964 California Highways & Public Works noted Interstate 605 and the San Gabriel River Freeway was extended to Interstate 10 during the past October.  Construction of the California State Route 240 portion of the San Gabriel River Freeway to California State Route 22 is stated to be partially financed in the next budget.  


The November/December 1965 California Highways & Public Works noted 4.7-mile portion the Interstate 605 segment of the San Gabriel River Freeway south of Whittier Boulevard during the previous September.  The California State Route 240 segment of San Gabriel River Freeway to California State Route 22 is noted to have a planned completion during Fall 1966.  


The 1967 Division of Highways Map displays Interstate 605 as being complete between Interstate 5 and Interstate 405.  The California State Route 240 stub of the San Gabriel River Freeway to California State Route 22 is also shown completed.  The remaining portion of the original California State Route 35 is shown to be relinquished from the State Highway System.  


1967 Senate Bill 99, Chapter 1101 codified the name of Interstate 605 between Interstate 405 and Interstate 10 as the San Gabriel River Freeway.  

1968 Legislative Chapter 282 reclassified the California State Route 240 and California State Route 243 portions of the planned San Gabriel River Freeway as Route 605.  During December 1968 the Federal Highway Administration added the San Gabriel River Freeway north of Interstate 10 as chargeable Interstate.  The addition of Interstate 605 as being chargeable north of Interstate 10 was made due to the provisions of the 1968 Federal Highway Aid Act.  

The two unbuilt segments of the San Gabriel River Freeway appear as Route 605 as on the 1969 Division of Highways Map.  The San Gabriel River Freeway never would be constructed south of California State Route 22 to Seal Beach.




Part 2; exploring the constructed portion of former California State Route 240

During 2020 Dan Murphy of the Roadwaywiz Youtube channel featured real-time drives on Interstate 605.  In the video below the transition of what would have been originally California State Route 240 can be seen as Interstate 605 southbound approaches Exit 1A which accesses westbound California State Route 22.  The transition ramp connecting Interstate 605 southbound to westbound California State Route 22 was constructed as California State Route 240. 


Below the California State Route 22 westbound can be seen approaching the transition ramp from southbound Interstate 605.  This structure was originally constructed as California State Route 240. 


Comments

Popular posts from this blog

Abandoned US Route 40 in the Truckee River Canyon

Within the Truckee River Canyon in the Sierra Nevada range numerous abandoned portions of US Route 40 can be found alongside modern Interstate 80.   This segment of highway was opened during 1926 as a bypass of the Dog Valley Grade which carried the early North Lincoln Highway and Victory Highway. The corridor of the Truckee River Canyon State Highway would be assigned as US Route 40 when the US Route System was commissioned during November 1926. During 1958 the segment of Interstate 80 between Boca, California and the Nevada state line was complete. When Interstate 80 opened east of Boca numerous obsolete portions of US Route 40 were abandoned. Some of these abandoned segments have been incorporated into the Tahoe-Pyramid Trail.  Part 1; the history of US Route 40 in the Truckee River Canyon The Truckee River Canyon for centuries has been an established corridor of travel known to native tribes crossing the Sierra Nevada range.  The first documented wagon crossi...

Former California State Route 41 past Bates Station

When California State Route 41 was commissioned during August 1934 it was aligned along the then existing Fresno-Yosemite Road north of the San Joaquin River.  Within the Sierra Nevada foothills of Madera County, the original highway alignment ran past Bates Station via what is now Madera County Road 209, part of eastern Road 406 and Road 207.   Bates Station was a stage station plotted during the early 1880s at what was the intersection of the Coarsegold Road and Stockton-Los Angeles Road.   The modern alignment bypassing Bates Station to the east would be reopened to traffic during late 1939.   Part 1; the history of California State Route 41 past Bates Station Bates Station was featured as one of the many 1875-1899 Madera County era towns in the May 21, 1968, Madera Tribune .  Post Office Service at Bates Station is noted to have been established on November 23, 1883 and ran continuously until October 31, 1903.  The postal name was sourced...

The William Flinn (not Flynn) Highway - Pittsburgh's Misspelled Street

For decades if you traveled along PA Route 8 in Pittsburgh's North Hills suburbs, you would have noticed signs that read "William Flynn Highway" at every intersection.  Even today, many businesses and residences have their addresses listed as XXXX William Flynn Highway.  However, it's not William Flynn Highway, it is William FLINN Highway - and the gentleman who it is named for has a long and storied past in Pittsburgh's infrastructure history. William Flinn was born in England in 1851; however later that year, his family emigrated to the United States and would settle in Pittsburgh.  A 10-year-old school dropout, Flinn grew interested in politics and would join the Allegheny County Republican Party in 1877 as a ward commissioner and a seat on the Board of Fire Commissioners.  Flinn would serve in the Pennsylvania State House of Representatives and Senate from 1877 to 1902. (1) Flinn along with James J. Booth would found the Booth and Flinn construction firm ...