Skip to main content

New I-795 (NC) Signage Photos

Since Easter seems to be new signage photo posting day, I'll continue with my new signage photos for I-795 that I took earlier Sunday.

As many of you may know, I-795 was established in the fall of 2007. While route markers went up in December 2007, changes in mile posts and exit numbers did not take place until late 2009 due to a focus on problems found with the route's asphalt surface. The signage update in 2009 was to mileposts and exit numbers only on I-795 and did not include changes on the 5-mile stretch with US 264 or on overhead signs. I took a road trip to find out if the new signs had finally been installed.
From the above, you can see the answer is yes. It also answers the question some had, would I-795 exits on US 264 use I-795 miles (as indicated on the state map) or US 264 miles, which many thought was more logical. The answer appears to be US 264 miles. One thing you can note from the above and this photo is:
that no direction is given for I-795. The Exit 43 B/A sign was also changed to reflect the return of US 117 to its old alignment, it used to have references to Alternate US 117. US 117 is noted in a secondary sign after the I-795 exit. The last changed sign going southbound makes it much easier for people to find I-795 than before:
A sole ground mounted I-795 sign was the only indicator the route exited, and it is still there. If you get off on I-795 by mistake:
You can still access US 301. (Sorry for the quality of the photos above, combination of sun angle and sticky pine pollen on the windshield).

If you are wondering how the pavement repair is going, they seem to have mostly finished the first layer going down on the right side of the road:
They are supposed to put another layer down over both lanes by this fall, hopefully this will last for more than a year.

They have also changed overhead signs northbound:
Notice they do provide a direction for I-795 here. There's a similar sign (without the 'To') after the merge with US 264. Wouldn't a 'To I-95' be useful here too? Speaking of, they've also placed new signs on I-95 as well:
It's somewhat unusual to see an overhead sign with 3 control cities, but necessary here.

I will follow up with another post later today about signage changes along I-40 near Raleigh, related to the removal of I-440 from I-40's route. This is a preview to keep you satisfied until then:

Comments

Anonymous saidā€¦
Will I-795 ever get completed to I-40???

From WIlmington, it reduces aoubt 30 miles of driving to go through Goldsboro.

Popular posts from this blog

Hawaii Route 8930

Hawaii Route 8930 is a 2.5-mile State Highway on the Island of O'hau.  Hawaii Route 8930 is aligned over Kualakai Parkway over the course of its entire alignment south from Interstate H-1 to Kapolei Parkway.  Hawaii Route 8930 is one of the newest Hawaii Routes only having been completed during 2010.   This page is part of the Gribblenation O'ahu Highways page.  All Gribblenation and Roadwaywiz media related to the highway system of O'ahu can be found at the link below: https://www.gribblenation.org/p/gribblenation-oahu-highways-page.html Part 1; the history of Hawaii Route 8930 The history of Hawaii Route 8930 is brief given it is a modern facility.  Hawaii Route 8930 and what was known as "North-South Road" were built to facilitate the developing areas of Kapolei on western O'ahu.  According to hawaiihighways.com the first stage of Hawaii Route 8930 was completed from Kapolei Parkway north to Farrington Highway as a four-lane highway during November...

Madera County Road 607 and the Stockton-Los Angeles Road

Madera County Road 607 is an approximately seven-mile rural unsurfaced highway which spans from Road 600 near Raymond west to Road 29.   Road 607 west from Raymond Road Cemetery (established in 1905) is part of the Stockton-Los Angeles Road corridor surveyed in 1853. The corridor lies in the gap between Fresno Crossing at the Fresno River west to Newton's Crossing at the Chowchilla River. The Buchanan Copper Mine would be along what is now Road 607 in the namesake Buchanan Hollow during July 1863. The Buchanan Mine is thought to have once had a population of between 1,000-1,500 residents by the early 1870s. Copper prices would decline in the decade after the Civil War and much of the activity at Buchanan shifted towards cattle ranching. The last businesses in the community would shutter during World War II and it is now a true ghost town. Part 1; the history of Madera County Road 607 and the Stockton-Los Angeles Road What is now Road 607 was a component of the larger Sto...

Old NC 10 - The Central Highway: Old Fort to Black Mountain through the Royal Gorge

A unique way of tracing the remnants of the Central Highway is through the mountainous terrain of Eastern Buncombe and Western McDowell Counties.  From the east on US 70, you reach the base of Blue Ridge Mountains at the town of Old Fort.  Old Fort is a tiny rail town that the old Central Highway and now US 70 goes through.  The Central Highway can be followed via a right onto Mill Creek Road from US 70.  Follow the highway as it takes you closer to the mountains.  When Mill Creek Road bears right to head towards Andrews Geyser stay straight until the road ends at a gate.  The nearby Piney Grove Church can be used for parking.  At this point, the old Central Highway began a 3.5 mile climb of the mountain to Swannanoa Gap.  NC 10 and later US 70 travelers followed this road for over 30 years until a new and modern four lane US 70 was built to the south.  This same four lane road would eventually become Interstate 40.    The Centra...