Skip to main content

Squam River Covered Bridge - New Hampshire

 


The Squam River Covered Bridge (or the Squam Covered Bridge) is located where the Little Squam Lake meets the Squam River in Ashland, New Hampshire. It is a 61 foot bridge that was constructed in 1990 using a Town lattice truss design by the famed covered bridge builders Milton Graton & Son, also of Ashland, New Hampshire. The bridge also features a walkway on the Little Squam Lake side of the bridge, so people who are passing by can admire the scenery of the nearby lake.

The covered bridge replaces a steel and concrete bridge that had been condemned by the State of New Hampshire on River Street in Ashland. After the condemnation, the state proposed building a two lane steel and concrete bridge for this site. However, the citizens of Ashland balked at this proposal, deciding that they would prefer a one lane covered bridge built in its place. At the 1988 town meeting in Ashland, the town voted to place $35,000 in a fund earmarked for building a new covered bridge. The balance of funds needed for this project were raised by the Squam River Covered Bridge Committee of the Ashland Historical Society, who still hold the funds today which can be used for necessary repairs for the bridge. Additional funds for the initial bridge construction were raised through special events such as bake sales and dinners, but the bulk of the money came from direct contributions from over 500 donors.

The Squam River Covered Bridge fits seamlessly into the landscape. Whether you are taking a boat out onto Little Squam Lake, or taking a dip in the lake at the nearby beach, the covered bridge serves as a nice reminder of New Hampshire's heritage. While the covered bridge is newer and not yet ready to be placed on any historical registers, it has become a classic in its own right. I had the chance to check out the covered bridge in Ashland on a glorious summer morning and got to enjoy what the bridge has to offer.


A nice side profile of the bridge, looking west.

Looking northbound into the bridge's portal. As you can see, there is an attached walkway that is separated from the main lane of traffic.

A nice plaque dedicated to a townsperson who dreamed of a covered bridge here.

The nearby beach on Little Squam Lake.

Boats and covered bridges dot the Lakes Region of New Hampshire.

Where the Little Squam Lake meets the Squam River. You can see this view from the bridge walkway.


How to Get There:



Sources and Links:
New Hampshire Covered Bridges - Squam Bridge
Squam Lake Inn - Discover the Covered Bridges of New Hampshire
NHTourGuide.com - Squam Covered Bridge Ashland NH
Bridgehunter.com - Squam River Covered Bridge 29-05-112
Wanderlust Family Adventure - Squam River Covered Bridge - Ashland, New Hampshire
Laconia Daily Sun - Donations sought by Ashland Historical Society for Squam River Covered Bridge repairs

Comments

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...

The last 1956-63 era California Sign State Route Spade?

Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...

California State Route 70; the Feather River Highway

From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...