Skip to main content

Brookfield Floating Bridge - Vermont

 


One of a handful of floating bridges in the world and certainly the only floating bridge in New England, there have been eight editions of a floating bridge spanning some 321 feet across Sunset Lake in Brookfield, Vermont since 1820. Part of Vermont State Route 65 (VT 65), the Brookfield Floating Bridge has connected the community of Brookfield over the years and makes for a dandy shortcut instead of going around Sunset Lake for motor vehicles and pedestrians alike. With Sunset Lake being more than 200 feet deep in places, a floating bridge makes some sense over other, more common bridge designs. While the bridge itself doesn't see much traffic, due to its uniqueness, the Brookfield Floating Bridge is a local landmark with plenty of history surrounding its existence. The Brookfield Floating Bridge is also known as Sunset Lake Floating Bridge, with the alternate name coming from the lake that the bridge crosses.

The first floating bridge was built with Yankee ingenuity by Luther Adams in 1820. During this era, area residents elected to travel across frozen Sunset Lake during the winter months to reduce the time to get across the lake as opposed to walking around the shoreline, with it being a shortcut of about 1 mile. Back in the 1810s, the residents on the west side of Sunset Lake found it difficult to get to the main village of Brookfield on the east side in the summer. They could go either north or south of the pond but with horse drawn carts, but it added much time to their journey. During the winter months, it was much quicker just to cross the ice . Talk of a bridge was commonplace at this time, but it took a tragedy to build the bridge. Tragedy struck on November 22, 1813 when Daniel Belknap decided to cross the thin ice instead of going around. As a result of this decision, he fell through the ice and drowned. The local townspeople mourned the loss of their neighbor and after much thought, a group of people led by Luther Adams decided to build a bridge across the lake, using a group of logs to strengthen the crossing. Once the ice melted in the spring, the logs remained floating and residents continued to cross Sunset Lake.

This type of bridge remained until 1884 when Orlando Ralph devised a flotation system using kerosene barrels. These tarred, wooden barrels were kept in place by the cribbing of the bridge's structure and the roadway itself. Succeeding bridges kept this basic design until the seventh edition bridge was built in 1978, although whiskey barrels were used for floatation with the sixth edition of the floating bridge bridge built in 1936.

Early in 1884, local townspeople were complaining about the poor condition of the Brookfield Floating Bridge. Some people wanted the bridge to be repaired while others wanted a road built around the north end of the pond. The town's Selectmen took no action on the matter, so the pro-bridge group appealed to the County Road Commissioner who ordered the bridge repaired and the town to pay $350 for the repairs. The Selectmen refused to do so and got a court injunction against the town financed repairs. The bridge advocates then contributed the funds necessary for the repairs and the new redesign for the bridge. Not to be outdone, the Selectmen laid out a new road around the north end of the pond. In the end, townspeople continued to use the bridge, and as temperatures cooled, the road was never built.

During the summer of 1978, the seventh Brookfield Floating Bridge was built. The basic structure of the bridge remained the same as the preceding three bridges, except that the wooden barrels were replaced by plastic containers filled with Styrofoam. The containers are functional, but lack the mystique and romance of the old wooden barrels. However, the off-market plastic containers absorbed water, causing the seventh version of the bridge to be closed to motor vehicle traffic in 2008 as the floating bridge was submerging into Sunset Lake. This modern bridge even has raised sidewalks to keep people's feet dry and to prevent you from slipping on the slimy, green wood that had been under water all summer.

After the seventh floating bridge closed to traffic in 2008, there was talk of building a new floating bridge. Some estimates pegged replacement costs at $2 million, which caused bridge replacement to fall lower on the Vermont Agency of Transportation's priority list because of the low traffic counts of about 110 vehicles per day on the bridge as well as the fact that the floating bridge is closed during the winter months. Other estimated pegged the replacement costs to be closer to $215,000. Fortunately, in 2014 and into 2015, the bridge was replaced. The design for the current bridge uses a flotation system consisting of ten 11-foot-wide and 51-foot-long FRP pontoons joined to form a monolithic float. The top side of the structure was constructed entirely of timber to match the aesthetic appearance of the original construction. The bridge was built to be more durable, maintenance-free, modular to aid in potential major repairs, and more predictable. The bearings and hinged expansion plates were specially designed and detailed to accommodate large movements caused by fluctuations in the lake level. As a result, the newest bridge is expected to last 100 years, and only the timber will need replacing in 30 to 40 years. The new bridge is also the world’s first fiber reinforced composite floating bridge with a timber deck and railings that conceal the pontoon rafts that are connected underneath the bridge.

The eighth edition of the Brookfield Floating Bridge opened to much fanfare in May 2015, reconnecting the community of Brookfield across Sunset Lake. With this in mind, the Brookfield Floating Bridge recently celebrated its 200th anniversary in 2020. While the bridge is closed to motor vehicles between November and April, it is open year round to pedestrians and is yours to discover.




Photos below are of the 1978 version of the Brookfield Floating Bridge. When I visited the bridge in 2011, the bridge was closed to vehicular traffic, but open to pedestrians and people fishing off the side of the bridge. As you can see, the bridge had submerged a bit over time.





How to Get There:



Sources and Links:
White River Valley Chamber of Commerce - Sunset Lake and the Brookfield Floating Bridge
VTDigger - Saving Brookfield’s endangered “bridge to nowhere”
Happy Vermont - A Vermont Floating Bridge Spans Generations, Connects a Community
Brookfield Historical Society - History of Brookfield, Vermont (PDF)
T.Y. Lin International  - Brookfield Floating Bridge Replacement
Bridgehunter.com - Brookfield Floating Bridge
Roadside America - Brookfield, Vermont: Floating Bridge
Vermont Agency of Transportation - The Brookfield Floating Bridge (PDF)
Brookfield Historical Society - Floating Bridge
WCAX - Community celebrates 200 years of the Brookfield Floating Bridge

Comments

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...

The last 1956-63 era California Sign State Route Spade?

Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...

California State Route 70; the Feather River Highway

From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...