Skip to main content

Downers Covered Bridge (Upper Falls Covered Bridge) - Vermont

Image
By

 


Also known as the Upper Falls Covered Bridge, the Downers Covered Bridge spans 129 feet across the Black River in Weathersfield, Vermont. The bridge was named for Abraham Downer, who was an early settler of Weathersfield. Downer and his descendants gave the name to the area where VT 106 and VT 131 now meet, known as Downer's Four Corners or Downers. Being in the general area, the bridge had become known as the Downers Covered Bridge.

The Downers Covered Bridge was built in 1840 by James Tasker, who was also the builder of the Salmond and Titcomb (Stoughton) Covered Bridges located nearby. Tasker designed the Downers Covered Bridge with a covered Town Lattice through truss design, plus the portals were intricately constructed to simulate a Greek Revival architecture, which was popular at the time (but not necessarily with covered bridges).

The covered bridge was extensively restored in 1975 and 1976 by famed covered bridge builders Milton Graton and Associates of Ashland, New Hampshire. Graton's team rebuilt the trusses, raised the bridge by 2.5 feet so that water could not flow in and damage the timbers, and reframed the floor with heavier timbers so the bridge would be more durable for modern traffic. In raising the bridge, that may be why you see one stone abutment and one concrete abutment for the bridge. Then in 2007, additional renovations by Wright Construction of Mount Holly, Vermont took place for items that were not addressed during the earlier restoration. This restoration included replacing parts of the bottom lower chord and adding a fifth chord to help strengthen the bridge span.




How to Get There:



Sources and Links:
Vermont Covered Bridge Society - Upper Falls Covered Bridge
Bridgehunter.com - Downers Covered Bridge 45-14-08
Covered Bridges on Two Wheels - Upper Falls Bridge
Labels:
Location: Downers Covered Bridge, Upper Falls Covered Bridge, Perkinsville, VT 05151, USA

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more