The current iteration of California State Route 11 is a planned tolled freeway known as the Otay Mesa Freeway Extension. The alignment of California State Route 11 is planned to originate from the Otay Mesa East Port of Entry and terminate to the west at California State Route 905/California State Route 125 interchange in San Diego. In current form only a mile of California State Route 11 from Enrico Fermi Drive west to the California State Route 905/California State Route 125 interchange has been opened to traffic.
Part 1; the history of modern California State Route 11
The current corridor of California State Route 11 ("CA 11") is second highway to use the number. The original CA 11 corridor was found in the Los Angeles Area and was one of the original Sign State Routes announced during August 1934. The original CA 11 featured numerous notable segments of highway such as the Arroyo Seco Parkway and Harbor Freeway. The original CA 11 featured multiplexes with US Route 66, US Route 6 and US Route 99. More regarding the original CA 11 can be found below:
The current CA 11 was designated via 1994 Legislative Chapter 409. Upon being designated during 1994 the current CA 11 was not given a specific route description. CA 11 was intended to terminate a new Mexican Port of Entry where it would connect with an unconstructed Mexican Freeway then known as Tijuanna 2000. CA 11 appears on the 2005 Caltrans Map with the following Legislative Description:
The generalized planned routing of CA 11 appears on the 2005 Caltrans Map.
According to CAhighways.org during June 2012 the California Transportation Commission approved CA 11 for consideration of future funding after a finalized Environmental Impact Report was submitted. During December 2012 the California Transportation Commission approved a route adoption of a new 2.8 mile tolled freeway from the CA 905/CA 125 interchange east to the proposed Otay Mesa East Port of Entry. The initial segment of CA 11 east of CA 905/CA 125 to Enrico Fermi Drive opened to traffic on March 19th, 2016 according to Caltrans District 11.
On July 7th, 2016 the San Diego Union Tribune announced that Caltrans and the San Diego Associations of Government ("SANDAG") had received $49.3 in Federal Funding for construction of CA 11. The Federal Funding was earmarked to constructed southbound ramp connectors between CA 11, CA 125 and CA 905.
During August 2019 the Los Angeles Tribune reported that construction of the second segment of CA 11 from Enrico Fermi Drive to the Otay Mesa East Port of Entry had begun and was expected to be complete during 2021. Construction of the Otay Mesa East Port of Entry is stated to have a projected beginning in 2021 with a completion target of 2023.
The San Diego Union Tribune reported during October 2024 that the Otay Mesa East Port of Entry was anticipated to be completed by 2024 due to COVID-19 pandemic related delays. The second segment of CA 11 was stated in the article to have an anticipated completion to the Otay Mesa East Port of Entry sometime during late 2021. During September of 2021 it was reported on the AAroads forum that the first Diverging Diamond Interchange in San Diego was opened at CA 11 and Enrico Fermi Drive. As of the publishing date of this blog (12/2/21) the second segment of CA 11 has not yet opened.
Part 2; Roadwaywiz features California State Route 11
During October 2020 Dan Murphy of the Roadwaywiz Youtube Channel (and Gribblenation) featured real-time drives on CA 11. Below eastbound CA 11 from CA 905 on the Otay Mesa Freeway Extension to Enrico Fermi Drive can be observed.
Below westbound CA 11 on the Otay Mesa Freeway Extension from Enrico Fermi Drive to CA 905 can be observed.
CA 11 and the Otay Mesa Freeway Extension were featured on the Roadwaywiz San Diego area webinar on April 18th, 2020. The panel (Dan Murphy, Tom Fearer and Scott Onson) discuss CA 11 and the Otay Mesa Freeway Extension at time stamp 51:28-55:56.
The US Route System was formally created by the American Association of State Highway Officials during November 1926. Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California. The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant. However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices. This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes. The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield. In the background Mount Whitney can be seen in the Sierra Nevada range. ...
Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...
A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida. One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region. For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate. Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century. Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area. The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...
Comments