Skip to main content

The rogue G28-1 California State Highway Spades

In this short blog we look at the somewhat rare but not unheard-of rogue G28-1 California State Highway Spades.


Part 1; what is the G28-1 California State Highway Spade? 

The Caltrans Manual of Uniform Traffic Control Devices Sign Chart from 2014 ("Caltrans MUTCD") dictates the types of signs and highway shields permitted for traffic control use in California.  California is known for the more ornate cut-out shields which are used for, US Routes, Interstate Highways, and State Routes.  The common shields which are typically found through California are:

US Route:  G26-2

Interstate:  G27-2

State Highway:  G28-2

The Caltrans MUTCD provides alternative shields for, US Routes, Interstate Highways, and State Routes.  These alternative shields are intended for guide sign usage but aren't explicitly limited to said function.  These alternative shields are:

US Route:  G26-1

Interstate:  G27-1

State Highway:  G28-1

The primary reassurance shields for; US Routes, Interstate Highways, and State Highways can be seen depicted below.


Part 2; the rogue G28-1 California State Highway Spades

While in theory the G26-1 US Route Shield and G27-1 Interstate Shield could be possible see a non-guide sign reassurance shield use I personally haven't encountered any on the road.  Conversely, I have encountered numerous G28-1 State Highway Spades in use as reassurance shields.  I have also acquired several G28-1 California State Highway Spades in my signage collection. 

The cover to this blog is an unused G28-1 California State Route 14 ("CA 14") shield I have in my sign collection.  This CA 14 is tiny as it measures only 18x18 inches.

I also have a G28-1 style CA 135 shield which can be identified as intended for assurance use given it has two mounting holes.  This shield is an older variant which is comprised from reflective paint with vinyl numerals.  

In terms of field signage this G28-1 CA 227 shield can be found near Arroyo Grande.

This G28-1 CA 180 shield was found on Whites Bridge Avenue (former CA 180) west of downtown Fresno. 

This G28-1 CA 270 shield once served as the first westbound reassurance shield as Bodie Road transitions from State Park maintenance to Caltrans maintenance.  Unfortunately this shield was missing upon my last visit to Bodie State Historic Park.  

G28-1 shields can be found in use in Yosemite National Park on El Portal Road and the Big Oak Flat Road.  CA 140 is marked on El Portal Road whereas CA 120 is marked on the Big Oak Flat Road and Tioga Pass Road.  

This G28-1 shield can be found on Brawley Avenue at the Fresno city limit approaching CA 180.

Know of any other G28-1 State Highway Shields in use around California for reassurance purposes?  Know of any G26-1 US Route Shields or G27-1 Interstate Highway Shields in use for reassurance purposes?  If so, please feel free to share in the comments, we would love to hear from you.

Comments

Anonymous said…
As I understand it, the G28-1 signs in Yosemite National Park aren't really used for "reassurance", since the state highways shown on those signs don't officially exist within the park, but rather end at the park boundaries. This is reflected in the legislative definitions of those routes, and Caltrans' Postmile Query Tool.

Those signs within the park seem intended to help park visitors reach the state highways outside the park.

Oscar Voss, ovoss@pobox.com
Challenger Tom said…
With CA 120 and 140 in Yosemite that is an interesting topic. 120 definitely signed enough that one could infer that it is continuous through the Park on the Tioga Pass Road and Big Oak Flat Road. With 140 it’s original 1934 definition had it use El Portal Road and the Old Big Oak Flat Road through the Park to reach CA 120 on what is now Evergreen Road (the Old Tioga Road) just outside the Yosemite boundary. I’ve been trying to find photos for years which might show CSAA 140 shields in Yosemite on the Big Oak Flat Road, thus far to no avail.
Stevashe said…
I know of one location with some rogue G28-1 signs that was actually only posted this year, and it even has two since it happens to be on a concurrency! It's on CA 36/89 just east of the CA 89 turnoff for Lassen National Park and Morgan Summit, where a realignment project was just completed. Unfortunately I only seem to have managed to get a picture of the back of the sign assembly, but you can at least see it has the different shape of the G28-1 compared to the G28-2: https://www.flickr.com/photos/184498735@N04/50379707676/in/dateposted-public/
Randy said…
There's a couple G28-1 style CA-58 signs at the Mojave/CA City Blvd overpass and freeway entrance.
Anonymous said…
Hi Tom, you showed some signs that you mentioned were in your collection; how did you go about obtaining them? I've been looking to get one for a bit, but I don't know where to start or where to look for them.
Challenger Tom said…
I got most of mine from eBay, antique shops and trading with other collectors.

Popular posts from this blog

West Canyon Road (Snow Canyon State Park)

West Canyon Road is an approximately four-mile dirt service road located in Snow Canyon State Park.  West Canyon Road follows Snow Canyon from the Whiptail Trail to the northern State Park boundary and intersects numerous trailheads.   West Canyon Road was the original main road through Snow Canyon after it was designated as a Utah State Park in 1957 and opened to the public in 1962. Part 1; the history of West Canyon Road Snow Canyon is located in the Red Mountains north of the city of Ivins in Washington County, Utah.  Snow Canyon is one of many sandstone canyons located in the Red Mountains.  Part of the extinct Santa Clara Volcano punctured the Red Mountains via lava tubes. From approximately the year 200 to 1,250 the area around Snow Canyon was inhabited by the Ancestral Puebloans.  Mormon pioneers established Santa Clara south of Snow Canyon in 1854.  Local legend has it that the settlers discovered Snow Canyon in the 1850s while searching for m...

Indian Gulch Extension and the Indian Gulch ghost town site

Indian Gulch Extension is an approximately 6-mile-long rural highway corridor in the Sierra Nevada foothills of western Mariposa County.  Indian Gulch Extension begins at Indian Gulch Road near the namesake ghost town of Indian Gulch.  From the ghost town site Indian Gulch Extension extends southwesterly to the Merced County line where it becomes Waltz Road.   The former Gold Rush era community of Indian Gulch which was settled near Santa Cruz Mountain in 1849 and had standing structures until the early 1970s.  What is now Indian Gulch Extension was approved for construction by the Mariposa County Commissioners in 1862.  The purpose of the corridor was to provide Indian Gulch with a direct connection westward with the greater Stockton-Los Angeles Road.  The Stockton-Los Angeles Road would go onto define much of the Mariposa County and Merced County line.  Part 1; the history of Indian Gulch and Indian Gulch Extension Indian Gulch Road is named aft...

The reemergence of US Route 99 at the Ventura Freeway/Golden State Freeway interchange

During April 2023 a portion of the sign gantry on the eastbound Ventura Freeway (California State Route 134) approaching the Golden State Freeway (Interstate 5) fell.  The fallen portion of the sign gantry revealed a once covered US Route 99 shield.  The uncovered US Route 99 sign (blog cover courtesy Ian Ligget) is a 1956-63 era freeway specification US Route shield.  This blog will explore in brief how the Golden State Freeway was developed as US Route 99 and US Route 6 before becoming solely Interstate 5.   This blog is part of the larger Gribblenation US Route 99 Page.  For more information pertaining to the other various segments of US Route 99 and it's three-digit child routes check out the link the below. Gribblenation US Route 99 Page Part 1; visiting the US Route 99 shield at the Ventura Freeway/Golden State Freeway Interchange As noted in the introduction the US Route 99 shield can be seen on the eastbound Ventura Freeway (California Sta...