Skip to main content

Harris Covered Bridge - Benton County, Oregon

Image
By

 


The Harris Covered Bridge located on Harris Road near Wren, Oregon was built by H.W. Fiedler to replace a covered bridge at the same site. The bridge was constructed in a Howe through truss design and is 137 feet in length as it spans across the Marys River. Although records in Benton County, Oregon records show 1936 as the construction date of the bridge, locals claim the span was built in 1929 and have posted the year on a sign on the bridge.

The Harris Covered Bridge retains a rounded portal design and other features, including narrow windows below the roof line to light the bridge's interior and longitudinal deck planks. The bridge's siding has been constructed with a board and batten style, along with a shingled roof. The covered bridge remains open for both light vehicular and pedestrian traffic.

Harris has been a community since 1890, bearing the name of a pioneer landowner by the name of George Harris. Before the community came along, there was a house and sawmill built by a gentleman by the name of Charles King. When the post office in town was established in 1918, residents petitioned for the name of Harris, but postal authorities feared confusion might develop with nearby Harrisburg. For a time, the town was known as Elam, named for Mrs. Gladys Elam, but the name of the community was later changed to Harris. The post office lasted until December 31, 1928 when it was closed and services moved to Wren.

Not much is left from the heyday of Harris, Oregon, just a few homes and a winery. The former town site of Harris is marked by the Harris Bridge Winery and the Harris Covered Bridge. The Harris Bridge Winery is located within view of the covered bridge, offering wine tasting, picnicking, a couple of annual music festivals and stories that have been penned by their resident writer.

To get to the Harris Covered Bridge, you can take US 20 west about four miles from Philomath to the intersection with OR 223 in Wren. Take the right onto OR 223 to Wren (Kings Valley Highway), then immediately take the next right to Wren Road. Take the next right, which is just before the train tracks on to Harris Road. From there, take Harris Road for about two and a half miles west of the community of Wren and you will encounter the Harris Covered Bridge. Happy traveling!


How to Get There:



Sources and Links:
Covered-Bridges.org - Harris Bridge
Travel Oregon - Harris Covered Bridge
Visit Corvallis - Harris Covered Bridge
Bridgehunter.com - Harris Covered Bridge 37-02-04
Pacific Northwest Photoblog - Harris, Oregon – Ghost Town, Covered Bridge, Winery (Elam)
Tabby Cat's Pawprints - Armchair photo tours: The Harris Covered Bridge near Philomath, Oregon

Labels:
Location: Harris Covered Bridge, 22900-22922 Harris Rd, Philomath, OR 97370, USA

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more