Skip to main content

Bath Covered Bridge - New Hampshire

 


Located in the center of the historic Lower Village in Bath, New Hampshire, the Bath Covered Bridge has been a pillar of the community since the year of 1832. In fact, you could say that the bridge fits like a glove in its setting in the beautiful Lower Village of Bath. At 374 feet in length, it is one of the longest covered bridges wholly in New Hampshire, and certainly the longest covered bridge that crosses the Ammonoosuc River. Despite its age, the bridge still manages to retain a good amount of historical integrity and is also notable due to its age, length and Burr truss inspired configuration. The Bath Covered Bridge connects US 302 and NH 10 in the center of the village with West Bath Road on the opposite bank of the Ammonoosuc.

The Bath Covered Bridge is actually the fifth bridge at this location. The Lower Village of Bath was already a small industrial center in the 1790s before there was any bridge. The town voted in November 1793 to bridge the Ammonoosuc River "over the mill-pond above Mr. Sargent's and Esq. Hurd's mills". As a result, the first bridge was constructed in 1794 at a cost of $366.66 (or 110 pounds total, as costs were still given in the British monetary system even in 1794). Then, disaster became a common theme at the location of the bridge. The first bridge was demolished by a flood caused by an ice jam and replaced in 1806 at a cost of $1,000. The second and third bridges were also destroyed by floods but immediately replaced in 1820 and again in 1824. The fourth bridge at the location was destroyed by fire in late 1830. A town meeting in March 1830 discussed rebuilding the bridge at Bath village, but postponed action, probably because of expenses had just incurred during construction of the Bath-Haverhill Bridge at Woodsville, New Hampshire. Rebuilding efforts began in March 1831 when $1,400 was allotted to cover the construction of two stone abutments and piers along with the purchase of other materials. In March 1832, an additional $1,500 was allotted for the wooden trusswork in order to complete the construction.

At one time, there was a sign posted at the portal of the covered bridge which prohibited riding horses across the bridge at a trot. It was believed that the impact of trotting horses could cause the structure to fall apart, especially since the covered bridge was initially built with a single arch, and due to its length, there was question on how sturdy the bridge really was. But as the Lower Village of Bath was a local commercial and industrial center, horses and wagons were a common sight along the spans of the bridge.

The Bath Covered Bridge also had the distinction of being one of a few covered bridges in New England that also crossed over railroad tracks. In 1852, the White Mountain Railroad was graded along the west bank of Ammonoosuc River underneath the Bath Covered Bridge. Rails were laid and train service began in 1853. The bridge required no structural modifications at the time, but since steam engines passed closely under it for about a century, it is fortunate that it never caught fire. At one point, the railroad installed sheet metal under the bridge in the area of the tracks to prevent sparks from setting the bridge ablaze. However, in 1920, new overlapping arches were added to the covered bridge when the bridge was raised over the railroad and also to increase the load capacity of the bridge. The Bath Covered Bridge was the last covered bridge in North America to span railroad tracks. The tracks themselves are now gone, but the roadbed remains.

By 1987, the Bath Covered Bridge was in need of major repairs, and the job went to Milton S. Graton of Ashland, New Hampshire, one of the premier bridge contractors of the late 20th Century. Graton completed restoration in early 1988, replacing posts that have suffered rotting or gnawing by insects. Between 2012 and 2014, the Bath Covered Bridge was closed for further renovation at a cost of $3 million. As the Bath Covered Bridge is a vital local transportation and tourism link, the renovation was deemed necessary to replace any timbers needed to keep the bridge in place. With Bath boasting three covered bridges (the Bath-Haverhill Covered Bridge and the Swiftwater Covered Bridge being the others), it is a draw to lovers of rural New England, quaint villages and fans of covered bridges such as myself.









How to Get There:




Sources and Links:
Bridgehunter.com - Bath Bridge 29-05-03
WMUR TV - Longest covered bridge in NH set to reopen Thursday
Studio and Garden by Altoon Sultan - Built: A Covered Bridge in Bath, New Hampshire
Historic Structures - Bath Covered Bridge, Bath New Hampshire
Bath, New Hampshire - The History of Bath
New Hampshire Covered Bridges - Bath Bridge

Comments

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...

The last 1956-63 era California Sign State Route Spade?

Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...

California State Route 70; the Feather River Highway

From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...