Skip to main content

Tennessee's Benton-Houston Ferry

Image
By

Inland ferries are oftentimes simple - they carry a handful of cars in a remote area where traffic volumes do not justify the need for a bridge.  Some are short, others are longer, and many do not have a lot of scenery.  Fortunately, many have a long and storied history.

Middle Tennessee's Benton-Houston Ferry is a more recent ferry crossing that carries Tennessee Highway 147 across the Tennessee River. It began operation in November 2007 and connects Benton and Houston Counties. The cost to cross is $1 per vehicle.


While it is a new ferry, there is still plenty of history around you. The Houston County ferry landing is located in the former town of Danville.  Danville was a Tennessee River community that flooded over when Kentucky Lake formed in the 1940s. There are a few remnants of Danville that you can still see from the ferry.

The remains of the former Danville Transfer Elevator stand above the waters of Kentucky Lake.

When you enter the ferry from the Houston County side and look to your left - you will see the shell of an old building standing over the water.  It appears to be on stilts - but it was once a much larger structure.  The building is a former six-story transfer elevator and warehouse that once sat along the Tennessee River.  The Danville Freight Elevator was built in 1914 and handled grain, cotton, minerals, and other items shipped along the Tennessee River.  A six-mile rail spur connected the warehouse and elevator to the main line of the Louisville & Nashville railroad.  When Kentucky Lake was formed, many towns like Danville were dismantled; however, the old transfer elevator and warehouse remained.

The remaining spans of the 1930s-era railroad bridge over the lake.

A second remnant near the Houston County landing is the two remaining spans of a former Louisville & Nashville bridge over the lake.  The bridge was built in the 1930s - replacing an older bridge over the Tennessee River.  When the railroad abandoned the line in the 1980s, all but two of the spans were removed. 

The ferry ride is a scenic ride over the lake and doesn't last too long. It is an enjoyable detour to take while on a day trip or just out exploring.

All photos taken by post author - December 2010.

Site Navigation:

Sources & Links:

How To Get There:


Labels:

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more