Skip to main content

Roebling Aqueduct

Image
By
In a quiet and often overlooked corner of Northeastern Pennsylvania, the country's oldest surviving suspension bridge crosses the Delaware River into New York.  The Delaware Aqueduct, designed and built by famed engineer John A. Roebling, has withstood a very colorful history from being an important piece in the region's transportation, to uncertainty during the growth of rail, nearly eight decades of neglect and poor management as a private toll bridge, to finally being restored by the National Park Service and in use as an automobile bridge today.

Construction and Canal Era (1847-1898):
During the 1840's, the Delaware & Hudson Canal was looking at ways to speed up service along its route.  One of the major bottlenecks was where the canal reached the Delaware River.  Since it began operation in 1828, the D&H used a rope ferry to pull traffic along to Canal across the Delaware.  The conflicting traffic of vessels going down the Delaware to Trenton or Philadelphia and of the coal freight cutting across the river on the canal created great bottlenecks.  That is in addition to the difficulty ferry operators would have fighting the powerful current. 
 
In 1847, the D&H commissioned John A. Roebling to construct a suspension bridge that would carry canal traffic above the Delaware.  In comparison to then-contemporary designs, Roebling's suspension design allowed for more room for downriver traffic and the dangerous ice floes to pass through.   Two years later on April 26, 1849 at a cost of  $41,750, Roebling's Delaware Aqueduct opened to canal traffic.  Soon thereafter, a sister suspension aqueduct, the Lackawaxen, was opened nearby at a cost of $18,650. (1)  The two bridges' impact were immediate and impressive as canal traffic was shortened by one full day.  The D&H was so impressed by the success and the bottom-line impact of the two bridges that they commissioned Roebling to design and construct another two.  Two years later, Roebling finished the construction of the Neversink and High Falls Aqueducts in New York.

Eight Decades of Neglect (1901-1980):
As railroads grew throughout the country, the need for canal traffic drastically declined.  In 1898, the D&H ceased operations.  Three of the four aqueducts, Neversink, High Falls, and Lackawaxen, were dismantled.  The Delaware, which still had a great deal of practical purpose as it crossed a major river, was sold to a private owner.  The owner, Charles Spurks, used the now dry aqueduct to haul logs for his lumber company across the bridge.  He built a toll house on the New York side of the river charging a toll to all others on the crossing. 
 
The bridge would change hands several times during the next 70-plus years.  As ownership changed, the condition of the bridge deteriorated.  The towpaths were dismantled, replaced by a handrail.  In 1933, the trunk of the bridge burned away completely.  Only the bridge deck was replaced, the walls of the aqueduct were not replaced.  A near tragedy occurred in 1977, when a truck fell through the bridge.  A lawsuit was filed against the then owners, but the bridge was only closed temporarily.  The condition of the bridge deck was so bad that one member of the park service said, "All one had to do was hop up and down on one end, and I could see a ripple running all the way from Pennsylvania to New York." (2) In 1980, the National Park Service bought the bridge and closed the structure in the hope to restore it. 

Restoration and Revival (1980-present):
Once the National Park Service owned the aqueduct, discussions and planning began on how to restore the bridge.  Before the bridge was under the Park Service control, the bridge was deemed in 1968 to be a National Historic Landmark.  In 1983, testing began on the strength of the bridge, and amazingly Roebling's original provisions easily met modern standards.  With most of the original superstructure intact, restoration began in 1985.  The restoration of the superstructure's base to Roebling's original specification was complete in 1986.  In 1995, the aqueduct walls, towpaths, and wooden icebreakers at the base of the piers were completed.
 
Today, the bridge is again open to vehicular traffic, without tolls.  It is a one lane bridge, and the former towpaths serve as sidewalks.  The toll house on the New York side remains and now serves as a history center detailing the history of the aqueduct, the D&H Canal, along with the restoration process.  With all original features of the bridge restored, crossing the bridge is like going back in time; the only difference, you don't need a boat to cross it.

Looking across the aqueduct into New York.  150 years ago, you would be underwater here.
From the towpath, more of the suspension superstructure.
The workings of the suspension superstructure is shown through glass partitions.
Looking downstream at the Delaware Aqueduct from the Pennsylvania shore of the Delaware.

Sources & Links:

  • (1) McCann, Brian.  "John Roebling and the Delaware Aqueduct." Pocono Lake Region Realtor. (April 1, 2007)
  • (2) Cobb, Emma. "Roebling's Bridge of Water."  Invention & Technology Magazine.  Vol. 2, Issue 1. Summer 1986.  Hosted by: americanheritage.com (April 1, 2007)
  • Roebling's Delaware Aqueduct ---National Park Service
  • Roebling's Delaware Aqueduct ---Bridgemeister.com
    • Labels:

    Comments

    Post a Comment

    Popular posts from this blog

    Grand Loop Road of Yellowstone National Park

    By
      Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
    Post a Comment
    Read more

    The last 1956-63 era California Sign State Route Spade?

    By
    Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
    Post a Comment
    Read more

    California State Route 70; the Feather River Highway

    By
    From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
    Post a Comment
    Read more