Skip to main content

NCDOT Announces 'New Exit Numbers' in Greensboro

Image
By
Another press release that may raise more questions than it answers from NCDOT was placed online this afternoon (8/20): https://apps.dot.state.nc.us/pio/releases/details.aspx?r=2877

"Motorists traveling on Interstates 40 and 73 in Guilford County can expect to see new signs and mile markers. Last summer, the N.C. Department of Transportation decided to reroute I-40 traffic from the Greensboro Western Urban Loop back to I-40 Business based on citizen comments.

The department has started replacing the following signs:

  • Changing the green I-40 Business signs back to the blue I-40 signs;
  • Re-signing the exits along I-40 as Exit 212 (I-40/73) to Exit 227 (I-40/85);
  • Re-signing the exits along I-73 as Exit 103 (I-73/40 interchange) to Exit 96 (I-73/U.S. 220 interchange); and
  • Rerouting U.S. 421 to run concurrently with I-73 and parts of I-85.

The I-85 exit signs will remain the same."


See the URL for the entire release and access to a correct(!) map of the new exit signs and designations for all the Greensboro interstates. The release also says "shield pavement markings will be installed along I-40 prior to the I-85/I-40 split on the west side of Greensboro to help motorists determine which lane to follow."

One problem, the I-85/40 split is EAST of Greensboro. Doh!


They say the hope to be completed in a few more weeks. Where have we heard that before?


Comment: 8 months after the signage replacement project that was supposed to be done at the end of the year, then April, then July, NCDOT releases this 'Final' release only to say the job's not done yet. Are they going to release another statement in September saying 'we are finally, finally done, please please you must believe us now."


'Motorists can expect to see new signs.' Are Greensboro drivers now suppose to look up and notice the new signs after most have been up since April? Are irate citizens going to call in saying why are you expecting us to see new signs when you put new ones up a few months ago?


And of course, there has to be one major blunder. If the people putting the news release together would look at the attached map, or an editor brought in to peruse the statement before putting it online they might have noticed that I-85 and I-40 meet east of Greensboro, not west. I'll plan to go out to Greensboro in mid-September and make sure the project truly is done. And that there are no I-85 shields at the I-40/I-73 interchange.


Labels:

Comments

Anonymous said…
wow! apparently the guy didnt know where I-85/I-40 split is.. lol. However, I like the idea of that..I am also living in Greensboro and not all signs are complete. I still see some Business 40 and US 421 signs in greensboro.. especially from the Bus 85/I-40 split eastwards. I dont know what is taking them long..

I just wish they can widen the Death Valley and replace all bridges on that section.. oh well.
4:35 PM
Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more