Skip to main content

Ground breaks on "New Era of North Carolina Transportation"

Image
By
Dignitaries break ground on the Triangle Expressway

At about 10:35 this morning, the toll road era of North Carolina transportation officially began. The ground breaking for the 18.8 mile Triangle Expressway ushers in a new and controversial era of road construction in the state.

The ground breaking ceremony was held at the current end of NC 540 at NC 55 near Apex.

"This marks a new era in transportation in North Carolina," said NC Department of Transportation Secretary Gene Conti. "With dwindling transportation revenues and more fuel efficient vehicles, the state needed another tool in its toolbox to deliver megaprojects like the Triangle Expressway."

Over 100 people witnessed the beginning of the new era.

U.S. Congressman David Price, who also spoke at the event, said that today's ceremony was an example of "where we've come from and where we're going."

Construction for the first segment of the Triangle Expressway - an extension of NC 147 from Interstate 40 to the Davis Drive Interchange with NC 540 - should begin soon. That section is expected to open in 2011.

The extension of NC 540 to the NC 55 Bypass in Holly Springs still has some land acquisition to be done. However, the road should be open to traffic in 2012.

Both segments are design-build projects. In a design-build project, the design and construction of a project happen simultaneously. Over the past decade, a number of highway projects in North Carolina used this method.

Fellow blogger, Bob Malme was also in attendance and his report on the ceremony is here.

Story Links:
State's first toll highway finally reaches beginning of road ---WRAL-TV w/video
Officials break ground on state's first toll road ---News14Carolina w/video

Photos below - for the entire set - go here.

In three years or so, this will no longer be the last exit on NC 540.

North Carolina Turnpike Authority Executive Director, David W. Joyner, speaks during the ceremony.
U.S. Congressman, David Price (4th District).
NCDOT Secretary Gene Conti:
Labels:

Comments

Bob Malme said…
I took some photos too, but there mainly duplicates of what Adam shot, so I'll spare everyone another look. I was going to take some shots of the existing roadways in the Triangle Parkway corridor before construction starts, but it started to rain, so I'll try again soon.

This was my first roadway groundbreaking and it was quite similar to a couple building groundbreakings I attended at Duke. Even down to the appearance of David Price (he's a Duke professor officially 'on leave'). None of them had bulldozers moving any dirt after the dignitaries, though.
10:09 PM
Georgia Road Geek said…
They should've given you guys a shovel and let you participate. :)
8:17 AM
Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more