Skip to main content

J.C. Van Horne Bridge - New Brunswick and Quebec

Image
By

 


Serving as a vital link between northern New Brunswick and the Gaspe Peninsula of Quebec, the J.C. Van Horne Bridge is a cantilever through truss bridge. Crossing the Restigouche River between Campbellton, New Brunswick, and the communities of Listuguj and Pointe-à-la-Croix in Quebec, the bridge is 804 meters (2,637 feet) long. The bridge consists of 4 deck truss approach spans on each side of the bridge and joined in the middle by a significant cantilever through truss structure. The cantilever through truss structure provides a clear span over the navigational channel of the Restigouche River below. The bridge carries an average of 12,500 vehicles daily, but there are not many roads or bridges that cross between this area of Quebec and New Brunswick. The next closest crossing of the Restigouche River is at the Matapedia Interprovincial Bridge, about 12 miles or 20 kilometers to the west near where NB 11 crosses into Quebec to meet QC 132.

Built between 1958 and 1961 and named for a New Brunswick politician by the name of Joseph Charles Van Horne, the J.C. Van Horne Bridge replaced a ferry service that ran across the Restigouche River between Campbellton and Pointe-à-la-Croix. The first ferry service between the two communities was established in 1855, taking passengers only. Later improvements to the ferry service allowed horses and buggies, and eventually, motorized vehicles, to cross. During the winters, the ferry was not in service, but there was an ice road in place across the Restigouche River to allow for crossing, with trees placed on either side of the ice road.

But by the 1950s, vehicular traffic began to increase for the ferry and a member of the Canadian Parliament representing New Brunswick, J.C. Van Horne, was tapped to make the case for a bridge to be constructed. Van Horne invited members of the federal and provincial governments to spend the day examining the traffic snarls and the length of time it took to get on a ferry. Van Horne selected July 26, 1957, for this day of observation, which happened to be the day of the St. Anne's Feast. People from all over the province came to attend the festival for the St. Anne's Day feast, so when the dignitaries arrived at the ferry crossing, there were long lines waiting at the slip. Legend has it that when the politicians asked "Is it always this busy"?,  Van Horne answered, "You should see it on Sundays"!

As a result of this visit, construction and funding for the J.C. Van Horne Bridge was authorized. The bridge was finally opened to traffic on October 15, 1961. Crossing back and forth between the provinces of New Brunswick and Quebec is much simpler and makes a world of difference for local residents and commerce. The bridge blends in well with the local scenery, I'd say. It's certainly a welcome sight in this otherwise quiet corner of eastern Canada and the North American continent.

A view of the J.C. Van Horne Bridge from the Restigouche River Experience Centre in Campbellton, New Brunswick. I've found some great views of the bridge from this area.

Crossing the J.C. Van Horne Bridge into New Brunswick. Signs lead you to the Appalachian Route, one of New Brunswick's signed scenic routes.

The J.C. Van Horne Bridge and Sugarloaf Mountain in the distance. The summit of Sugarloaf Mountain offers unparalleled views of the J.C. Van Horne Bridge, Campbellton, the Restigouche River and Chaleur Bay.

Crossing the J.C. Van Horne Bridge.

Entering New Brunswick from the J.C. Van Horne Bridge.

The nearby hills along the Restigouche River as seen from near the J.C. Van Horne Bridge.

The Campbellton Range Rear Lighthouse can be found near the J.C Van Horne Bridge, and I would guess you can get some pretty nice views of the bridge from the top of the lighthouse. While this current lighthouse was built in 1985 to incorporate a skeletal light tower into an octagonal lighthouse, the first lighthouse in Campbellton was built in 1879. For a while, the lighthouse also served as a hostel.

There is no fancy signage for the J.C. Van Horne Bridge itself, but since QC 132 is just a few miles over the bridge, you can follow the QC 132 signs to the bridge.


How to Get There:



Sources and Links:
Government of Canada - J.C. Van Horne Bridge
Pictures and Photos of Canada - JC Van Horne Bridge New Brunswick
Rolf Hicker - JC Van Horne Bridge New Brunswick
Byron Christopher - Aerials: Campbellton & Area [2015]
Restigouche County New Brunswick, Canada Genealogy and History - A Van Horne Link
Labels:
Location: J.C. Van Horne Bridge, Canada

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more