Skip to main content

Montlake Bridge - Seattle, Washington

 


In many ways, the Montlake Bridge is the gateway to the University of Washington in Seattle. With its Gothic architectural touches, this bridge over the Montlake Cut of the Lake Washington Ship Canal fits right in with the university campus located just to the north. The Montlake Bridge spanning the Montlake Cut in Seattle was completed in 1925, the easternmost and the last built of four double-leaf bascule bridges that carry both vehicular and pedestrian traffic across the canal. Based on a Chicago design for bascule lift bridges, the Montlake Bridge is 345 feet long with a main span of 182 feet, a width of 40 feet, and a clearance of 19.8 feet. The bridge does open for vessels as needed, generally about 2,500 times per year.

Serving as the only direct link between the Montlake neighborhood and the University District, the Montlake Bridge is part of WA 513. It should be noted that it was quite the process for the Montlake Bridge to become reality. Seattle voters denied funding for the Montlake Bridge on five occasions between 1914 and 1922, and when a $500,000 bond issue finally was passed in 1923, the bond issue was ruled void due to technical reasons. The bond issue for a Montlake Bridge went before the voters one last time in 1924, finally gaining approval. 

One group that was instrumental in getting the necessary votes for the construction of the Montlake Bridge was University of Washington football fans. With the Montlake Bridge's proximity to modern-day Husky Stadium and the University of Washington campus, it was a project that would more directly benefit football fans who previously may have needed to make a more lengthy detour to get to the stadium, save for the deployment of a temporary pontoon bridge that began service in 1920 across the Montlake Cut, allowing fans to walk to home games via Montlake Boulevard. Before the 1922 vote, bridge supporters tried a new tack, mobilizing fans to support the project by dubbing it the Montlake-Stadium Bridge as the first University Stadium was built in 1920. Boosters took up the Montlake-Stadium Bridge name and lobbied hard for voter approval of the span. Success almost came when, on May 2, 1922, the bridge for the first time received a majority of the votes cast, but still fell 1,872 votes short of the necessary 60% for approval.

Scandal and technicalities also played a role in building momentum in getting voter approval for the Montlake Bridge construction. On July 12, 1922, the Seattle Post-Intelligencer claimed that the City of Seattle's engineering department had since 1913 spent $682,000 more on salaries than it had spent building all three of the other canal bridges combined, which in turn begat a minor scandal. The City Engineer Arthur H. Dimmock was soon replaced and funding for the Montlake Bridge went to the voters for the seventh time on May 8, 1923, just squeaking through with 211 votes more than the 60% needed. However, the winning vote fell afoul of recent changes in Washington State law governing serial bonds, so the measure had to be resubmitted to the voters in 1924. A public relations campaign was started and adopted a motto intended to shame voters who might not benefit directly from a bridge at Montlake. Influential football fans joined the fray, and in the election on March 10, 1924, voters again approved bridge financing through $500,000 in bonds by a margin of 81% in favor. Construction began soon afterward and the bridge opened ahead of schedule on June 27, 1925, with the City of Seattle staging a gala ceremony to dedicate the Montlake Bridge to both automobiles and streetcars.

Today, the Montlake Bridge continues to serve as a necessary transportation link between the University of Washington Campus, Husky Stadium, the Montlake neighborhood, and Seattle as a whole. While the streetcars are gone, I found that there were plenty of cars, bicycles, and pedestrians crossing the bridge, along with plenty of boats crossing underneath the bridge. The Montlake Bridge is truly a gem and fits seamlessly within the community.

Starting to cross south onto the Montlake Bridge. WA 520 is located just after the bridge.

Gates are in place for when the Montlake Bridge has to be lifted for oncoming watercraft with high clearances. 

The main span features a deck with steel grating.

The Montlake Bridge features Gothic towers to mimic the architecture designs of the University of Washington campus nearby to the north.

Looking at the side of the bridge and the Montlake Cut below.

Looking northbound at the Montlake Bridge

Historical plaque.

Side profile of a Montlake Bridge control tower.

Looking west at the Montlake Cut of the Lake Washington Ship Canal. It was quite the morning to be out on the water.

Looking east at the Montlake Cut and Lake Washington from the Montlake Bridge.

Looking at the Montlake Bridge from the Montlake Cut.



How to Get There:



Sources and Links:
520History.org - Montlake Bridge
HistoryLink.org - Montlake Bridge (Seattle)
Bridgehunter.com - Montlake Bridge
The Daily - The gateway: The story behind the Montlake Drawbridge and its operator
Montlake Community Club - Montlake: One of Seattle’s Treasures
Livabl - The unusual history of Seattle’s Montlake Bridge

Comments

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...

May 2023 Ontario Trip (Part 3 of 3)

  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...

Ghost Town Tuesday; Nichols, FL

A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida.  One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region.  For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate.  Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century.  Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area.  The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...