Skip to main content

Former Legislative Route Number 126 along Madera County Road 208

By

Madera County Road 208 west of modern California State Route 41 to modern California State Route 145 once carried the original alignment of Legislative Route Number 126.  Said corridor was adopted into the State Highway System during 1933 along what was then known as Bellview Road.  The highway was realigned in 1940 to the Friant Dam Access Road (now Madara County Road 145 and 206) as a cooperative project between the Division of Highways, Works Projects Administration and State Relief Administration.  

The segment of Madera County Road 208 carrying early Legislative Route Number 126 can be seen on the 1935 Division of Highways Map of Madera County in Township 10S, Range 20E.  On this map Legislative Route Number 126 terminated at the original alignment of California State Route 41 along what is now Madera County Road 209. 




Part 1; the history of early Legislative Route Number 126 along Madera County Road 208

The portion of what is now Madera County Road 208 to approximately one mile east of modern California State Route 41 was part of the Stockton-Los Angeles Road.  

The Stockton-Los Angeles Road came into use after the 1853 Kern River Gold Rush began.  The new highway was a replacement of the earlier El Camino Viejo.  Unlike El Camino Viejo the Stockton-Los Angeles Road avoided the dense Tule Marches in San Joaquin Valley.  The corridor entered northern Fresno County via Newton's Crossing and headed southeast towards the original county seat of Millerton.  Portions of the old highway exist today in Madera County as Road 607 via the Buchanan Mine, the early portion of Road 407 to Fresno Crossing in the Hensley Lake Reservoir, Road 400, Road 406, Road 209, Road 208 and a series of now abandoned roads to what is now Lake Millerton.  

The Stockton-Los Angeles Road in Fresno County between the Chowchilla River and Millerton at the San Joaquin River can be seen on the 1857 Britton & Rey's Map of California.


As the Southern Pacific Railroad was being constructed through San Joaquin Valley during the late 1860s and 1870s a series of flood resistant frontage roads was constructed.  These roads shifted the main path of overland travel south from the Stockton-Los Angeles Road to the new railroad communities such as Fresno.  The Fresno County seat would relocate out of Millerton to Fresno in 1874. 

Despite the overall decline of the Stockton-Los Angeles Road the corridor remained important to local travel in northern Fresno County.  The highway would connect numerous stage roads north to the mines and logging operations found in places such Fresno Flats, Coarsegold and Crane Valley.  In 1876 the town of Madera was plotted out along the Southern Pacific Railroad by the California Lumber Company.  The then new community was connected to the Stockton-Los Angeles Road and Fresno-Fresno Flats Road (now Madera County Road 211) by a new highway which largely comprises modern California State Route 145 in addition to the remaining portion of modern Madera County Road 208.  

The road from Madera east to the Fresno-Fresno Flats Road can be seen in detail on the 1891 Thompson Atlas of Fresno County.  The segment which would later be incorporated into Legislative Route Number 126 can be seen originating in Madera at Township 11S, Range 18E and extending east to Township 10S, Range 20E.  Madera County would be incorporated out of what was Fresno County north of the San Joaquin River on May 16, 1893.  


The road from Madera to the Fresno-Oakhurst Road (formerly Fresno Flats) can be seen in detail on the 1914 Madera County Surveyor's Map.  


During 1921 Bellview siding of the Minarets & Western Railroad would be established at the end of road connecting Madera to the Fresno-Fresno Flats Road.  The entire corridor would come to be known for a time as "Bellview Road." 

1933 Legislative Chapter 767 added Legislative Route Number 126 (LRN 126) to the State Highway System.  The original definition of the state highway was:

"Fresno-Tracy Westside Highway near Kerman to LRN 4 near Madera (former US Route 99 on Gateway Drive) to Fresno-Yosemite Road (modern Madera County Road 209). "

LRN 126 (solid red lines) along Bellview Road east of Madera to the Fresno-Yosemite Road (LRN 125) can be seen on the 1935 Division of Highways Map of Madera County   LRN 125 in Madera County would be designated as part of California State Route 41 when the initial run of Sign State Routes was announced in August 1934.  The early alignment of LRN 125 displayed here is now Madera County Road 209. 


The alignment of California State Route 41 around Bates Station was featured in the December 1939 California Highways & Public Works.  The corridor described in the article began at Kelshaw Corners along Coarsegold Creek and extended ten miles southwest.  The previous alignment is displayed as being routed past Bates Station via what is now Madera County Roads 209, 406 and 207.  The new alignment saved three miles and was noted to be complete during late October 1939. 


The new alignment of California State Route 41 bypassing Bates Station led LRN 126 being temporarily extended east of Fresno-Yosemite Road at Millers Corner (later Twenty-Two Mile House).  LRN 126 itself was realigned to a new junction with California State Route 41 and the new Friant Dam approach road (now Madera County Roads 145 and 206) in 1940.  The realignment is noted to be a cooperative project between the Division of Highways, Works Projects Administration and State Relief Administration in the January 1940 California Highways & Public Works.  


The new alignment of LRN 126 connecting with California State Route 41 and the Friant Dam Access Road can be seen on the 1940 Division of Highways Map.  


LRN 126 would be designated as California State Route 145 in 1948.  Bellview Road would be designated as "Road 208" when Madera County dropped naming conventions during the mid-twentieth century.  Wide Awake Ranch would eventually purchase Road 208 between modern California State Route 145-Road 209 and prohibit public access.  



Part 2; a drive along former Legislative Route Number 126 on Madera County Road 208

A small portion of former LRN 126 west on Road 208 of California State Route 41 at Twenty-Two Mile House is still accessible to the public west to Road 209.  




Former LRN 126 west of Road 209 still exists but is gated off by Wide Awake Ranch.  


Labels:

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more