Skip to main content

Keefers Mill Covered Bridge - Washingtonville, Pennsylvania

Image
By

  


Spanning 75 feet across the Chillisquaque Creek on Keefer Mill Road near Washingtonville in Montour County, Pennsylvania is the Keefers Mill Covered Bridge. Also known as the Keefer Covered Bridge No. 7 in Montour County's covered bridge inventory, it is the only remaining bridge that is located entirely within Montour County, although some covered bridges cross the border of the county. The bridge was built in 1853 by George Butler at a cost of $498.00. Butler designed and built the covered bridge using a Burr arch truss design.

The site of the Keefers Mill Covered Bridge was near Geringer's Mill, but not much is known of that mill. However, records do list the builder of the mill as George W. Keefer, who built a number of mills and covered bridges throughout north central Pennsylvania and it is quite possible that the covered bridge was named for Keefer. The covered bridge was added to the National Register of Historic Places in 1979 and was rehabilitated in 1983 after sitting idle since 1976. Funds from liquid fuel taxes were used to rehabilitate the covered bridge, and $38,500 was used from that tax fund for its reconstruction.

As you may notice, the covered bridge has a square opening, which is unusual for covered bridges found in Pennsylvania. The panels at the bridge's portals that give the Keefers Mill Covered Bridge that unique look create a square opening that are called storefront panels. If you are visiting the bridge, you will find that it is set on a quiet road. There are a couple of pulloffs near the bridge that are small enough for a single car to fit. There are a few trees located along the Chillisquaque Creek that lend to the covered bridge's surroundings, but seem to get in the way for bridge photography.






How to Get There:



Sources and Links:
Valley Girl Views - Keefers Mill Covered Bridge
Bridgehunter.com - Keefer Covered Bridge 38-47-03
UncoveringPA - Visiting the Covered Bridges of Montour County, PA


Update Log:
February 18, 2022 - Crossposted to Quintessential Pennsylvania - https://quintessentialpa.blogspot.com/2022/02/keefers-mill-covered-bridge.html
Labels:
Location: Keefer Mill Rd, Pennsylvania 17821, USA

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more