Skip to main content

Blair Covered Bridge - New Hampshire



If a covered bridge could ever suffer bouts of misfortune, it is the Blair Covered Bridge in Campton, New Hampshire. Tales of arson, a horse drowning and flooding from an historic tropical storm have all left its mark on this bridge's history. But the covered bridge is peaceful and idyllic at most times, and there is even a nice farm to table restaurant at one end of the bridge. Located just off of US 3 within the scenic White Mountains region of the Granite State, the 293 foot long Blair Covered Bridge crosses over the Pemigewasset River (or Pemi, for short). The bridge was initially built by Hiram W. Merrill of nearby Plymouth, New Hampshire using a truss design patented by Colonel Stephen Harriman Long. This design is New Hampshire's only surviving example of Long's design to retain wedges at the lower chords at which the trusses were pre-stressed during construction, which stiffened the bridge against the weight of traffic. The Blair Covered Bridge is also listed in the World Guide of Covered Bridges and is eligible for listing on the National Register of Historic Places.

The first edition of this bridge over the Pemigewasset River was built in 1829 at the cost of $1,000. The original bridge across the river was burned down in 1868 by Lem Parker. There were no witnesses, so he was never convicted of arson, even though he confessed in court during his trial that "God told him to do it."

The construction of the current covered bridge was brought about when a doctor trying to ford the river on horseback in this now bridge-less locale found the current too strong. Unfortunately, the horse drowned, but the doctor was saved. As a result, the town of Campton voted to build a bridge immediately, and in 1869, the new bridge over the Pemi was built. A sign was posted on the bridge indicating there was a fine of five dollars for riding or driving on the bridge faster than five miles per hour.

The bridge was rebuilt by Milton Graton and his son Arnold in 1977 at a cost of $59,379. The town of Campton and the State of New Hampshire shared the cost of the repair. In August 2011, disaster and misfortune struck the Blair Covered Bridge again. The recipe for this disaster was due to Tropical Storm Irene, as the bridge was impaled with a big tree branch through its center. The storm did a lot of damage both there and at the neighboring Country Cow Restaurant, which is now the Covered Bridge Farm Table. The Covered Bridge Farm Table was featured in a 2014 episode of the Food Network series Restaurant Impossible. But back to the bridge, there had also been other storms and car crashes in the bridge that had led the town to consult with an engineer who recommended a major restoration. The State of New Hampshire favored a metal bridge to be erected in its place, but the town of Campton insisted on a wooden covered bridge. Arnold M. Graton & Associates was brought in to renovate and reconstruct the bridge, with the cost of the project was about $2.5 million of which the Town of Campton, which owns the structure, paid $200,000.

I had visited the Blair Covered Bridge in September 2009 and again in June 2018. The following are pictures that I took in 2009. The bridge could have used a little touch-up in 2009.








I revisited the bridge in June 2018, after renovations took place.





How to Get There:

Sources and Links:
The 10 Coolest Covered Bridges in New Hampshire - TripSavvy
Blair Covered Bridge - NH Tour Guide.com
Blair Bridge over the Pemi River in Campton NH - Arnold M. Graton & Associates
Historic Blair Bridge now open after restoration - WMUR
Blair Bridge - New Hampshire Department of Transportation
Blair Covered Bridge 29-05-09 - Bridgehunter.com
The Story Of New Hampshire’s Most Cursed Covered Bridge Will Chill You To The Bone - Only In Your State

Comments

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...

May 2023 Ontario Trip (Part 3 of 3)

  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...

Ghost Town Tuesday; Nichols, FL

A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida.  One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region.  For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate.  Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century.  Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area.  The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...