Skip to main content

Trying to figure out what happened to Greensboro's Murrow Blvd. freeway plans

Image
By
Sometimes you never know when and how you will discover a new piece of road history.  Yesterday, our family went to the Greensboro (NC) Children's Museum and on the way there and back I noticed what appeared to be a stub end to a divided highway.  I wasn't aware of this prior so of course I did some quick research.

Murrow Boulevard is a divided highway that runs along along the east side of Greensboro's Downtown Core and turns northeast to split into two one way streets - Fisher and Smith.  Murrow, Fisher, Smith, along with Edgeworth and Spring Streets form a downtown loop similar to the one in Durham.  But there appears to have been more planned for Murrow Blvd and the area south of Downtown Greensboro.

The end of Murrow Blvd. in Greensboro suggests that there was more planned for the highway.

Murrow Blvd. - which is named after Edward R. Murrow - has an awkward end where it meets Gate City Boulevard (formerly NC 6 and Lee St.).  Just after the Gorrell Street overpass (seen above), the divided highway jogs to the right - the median widens - and Murrow ends at a traffic light.  If you are wanting to go North on Murrow Blvd. from Gate City, you will notice that the one lane road immediately becomes three lanes and there is a stub end showing that the road was supposed to continue south of Gate City.

In fact, if you look at aerial photographs of Greensboro - as early as 1968 - you'll see what appears to be two items, grading for an overpass over then Lee St. and what looks like a ramp what is now Martin Luther King Blvd. to Gate City.  A 3D Google Earth Image is available here. The plan was to build a freeway from this point and connect to the Coliseum Area. Basically this highway would run south and parallel to what is Gate City Blvd.  A general plan of the highway is shown below.

Basic Murrow Blvd. Expressway Plan (otherstream.com)
The plan pretty much fizzled and it appears that concerns about dividing the city into two sections (poorer areas to the south / more affluent to the north) was the driving force behind the plans falling through.  That's all that is pretty much known (at least on the internet) about the Murrow Blvd. Extension.  If you have any additional information, drop me a line or leave a comment.

Sources:
"In Which I Nag About Greensboro History" ---Otherstream.com
Labels:

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more