Skip to main content

Wire Bridge - New Portland, Maine

Deep in the woods of Maine, there is a gem of a bridge. In the small town of New Portland, the Wire Bridge spans over the Carrabassett River and is a delight to see in person. The Wire Bridge is unique among bridges, being the only survivor of four such bridges built in Maine in the 1800's and most likely the only such bridge of its kind still standing in the United States. Available records indicate the building of the Wire Bridge had began in 1864 and construction was completed in 1866. Two men, David Elder and Captain Charles B. Clark, were largely responsible for the bridge's design and construction.

The Wire Bridge's towers are constructed of timber framing and covered with boards protected by cedar shingles. The wooden towers and wire suspension are unique among suspension bridges in the U.S., making the bridge quite unique. In 1959, the legislature of the State of Maine enacted legislation for the preservation of this bridge, and as a result, the bridge was renovated in 1961. When the bridge was renovated, the tower bases were capped with concrete, the towers were rebuilt, steel suspender rods were replaced by steel cables, and a new timber deck was installed. However, the tower framing timbers and main support cables are still the original material to the bridge. The span between the towers is 198 feet in length.

Today, you can quietly enjoy the bridge, explore the surroundings, and even have a picnic along the river. You can drive over the bridge, but there is a weight limit of 3 tons, a height clearance of 12 foot, 4 inches and a maximum width of 9 feet, 9 inches.









How to Get There:


Sources and Links:
MaineDOT - Wire Bridge, New Portland, Maine
New Portland, Maine - History
Atlas Obscura - Wire Bridge
See / Swim - Wire Bridge
Bridgehunter.com - New Portland Wire Bridge

Crossposted to: https://travel-newengland.blogspot.com/2020/01/wire-bridge-maine.html

Comments

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...

The last 1956-63 era California Sign State Route Spade?

Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...

California State Route 70; the Feather River Highway

From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...