Skip to main content

Rexleigh Covered Bridge

Image
By
Located just outside of picturesque Salem, New York, the Rexleigh Covered Bridge is one of four covered bridges that are still standing in Washington County, and one of thee covered bridges that cross the Batten Kill while in New York. There are more covered bridges that cross the Batten Kill in neighboring Vermont. The Rexleigh Covered Bridge is also the location for a popular swimming hole. The 107 foot long bridge was originally built by Reuben Comins and George Wadsworth in 1874 and is one of only three Howe truss bridges remaining in New York State. The bridge was supposedly prefabricated in Troy, New York and transported by rail to Rexleigh where it was reassembled in place. One unique feature of the Rexleigh Covered Bridge are the cast iron shoes, which were used to fit the bridge timbers into joints with iron rods. This feature has been incorporated into no other known covered bridge in the United States of America.

The Rexleigh Covered Bridge has had its share of events over the years. A number of flooding events almost washed the bridge downstream or caused the bridge supports to settle. By 1979, a decision to demolish and replace the bridge was made, but thanks to local support, the old covered bridge was saved. In 1984 and again in 2007, the bridge was rehabilitated. If you visit the bridge today, you will find a quiet pastoral scene. Looking at the Batten Kill from the bridge, there are remnants of what looks like an old mill upstream from the bridge as well. So there are many reasons to enjoy this quiet, red covered bridge.

Old mill?

Looking upstream at the Batten Kill.

One of the portals to the covered bridge.

Side profile of the Rexleigh Covered Bridge.

The area around the bridge is also a popular swimming hole.


Sources and Links:
New York State Covered Bridge Society - Rexleigh Covered Bridge
Town of Salem, New York - Around The Town

How to Get There:

Crossposted to http://unlockingnewyork.blogspot.com/2018/02/rexleigh-covered-bridge.html
Labels:
Location: Rexleigh Rd, Salem, NY 12865, USA

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more