Skip to main content

Tour of Phase III of the Triangle Expressway

On Thursday, December 20th, the third - and at this point final - phase of the Triangle Expressway opened to traffic.  The opening extended the NC 540 Toll Road and additional five miles from US 64 in Apex to the NC 55 Bypass in Holly Springs.

Prior to the expressway's opening, I was fortunate enough to tour the highway via the Expressway Trot 5k on December 2nd.  On Christmas Eve, I took a spin on the new road for the first time.

For the entire flickr set, head here.

Since I never was able to get a good photo of it prior (and because I live on the opposite end of Wake County from here), I finally am able to post a photo of the 'END' NC 540 shield for the brief free section of NC 540. (I-40 to NC 54).

IMG_6727

Prior to that shot, the VMS announced that the highway is now open to NC 55 in Holly Springs.  This message alternates with a message explaining that tolls on that section will begin on January 2, 2013.

IMG_6726

And here's the newly opened stretch of highway!

IMG_6731

Don't let the empty roadway fool you - there was a fair amount of cars traveling the toll road on this afternoon.

IMG_6733

Designers of the toll road have mentioned that they included some visual aesthetics to enhance the driving experience and to differentiate if from a normal limited access highway.  The fancier concrete sign bridges, brick overpass foundations, and also brick sound barriers are part of those aesthetics.

IMG_6735

In addition, trees and shrubs have recently been planted in the grass median throughout the length of the toll road.

Here's the TriEx South at South Salem St. (Old US 1).

IMG_6740

Overheads for US 1 North and South just after the South Salem Street interchange.

IMG_6741

Toll NC 540 ends at the NC 55 Holly Springs Bypass.  What's interesting about this interchange is that traffic wanting to get on Bypass NC 55 West is directed over the median and onto the northbound Toll 540 carriageway to crossover NC 55 before taking a loop ramp onto Bypass NC 55 West.

IMG_6748

Here's the overhead for entering the Triangle Expressway from Highway 55 East.

IMG_6751

I detoured onto US 1 briefly so I could check out the signage for the new toll road on US 1 and also I was informed that the flyover ramp from US 1 North to Toll NC 540 North was actually pretty neat.

Here's the overheads on US 1 North at the Triangle Expressway Interchange (Exit 93)

IMG_6760

I think this is the first time in North Carolina a split ramp on a flyover interchange is split into A/B ramps.  I know that the ramps from I-40E to I-540/NC 540 or I-95N to I-40 does not have an A/B split.

IMG_6762

Chris Allen had given me a heads up on the flyover ramp from US 1 North to Toll 540 North.  And it is actually pretty interesting.  The ramp goes under the Triangle Expressway before going over US 1 to reach NC 540 North.  The signature red brick of the Triangle Expressway actually makes an impression here.

IMG_6763

Finally, I exited onto S. Salem St to check out how the new toll road is signed on more of a surface street/rural road.  Interestingly, there's an additional sign outside of the 'TOLL' 'NC 540 diamond' and Arrow.

IMG_6772




Comments

James Mast said…
"I think this is the first time in North Carolina a split ramp on a flyover interchange is split into A/B ramps."

Not true. The Northern I-485 interchange with I-77 did this first on the Inner loop ramp.

http://goo.gl/maps/d5rOM
Chris Allen said…
Thank you for not saying "Chris Allen had mentioned the US 1 flyover ramp, but I actually thought it was totally lame and uninteresting and a complete waste of my time." :)
Brent White said…
James, I-77 Southbound at I-277 has had the split into A/B ramps at least since 1994.
James Mast said…
Brent, that's not a flyover like the I-485/I-77 interchange is.

Popular posts from this blog

Crescent City Connection (New Orleans, LA)

The Crescent City Connection is a massive dual-span steel truss bridge that spans the lower Mississippi River at downtown New Orleans, about 95 river miles upstream from the mouth of the great river at the Head of Passes Light. If counted as a single bi-directional highway bridge, the parallel spans combine to form the single busiest bridge on the Mississippi River and its importance as a linchpin in the region’s transportation network cannot be overstated. While there have been various schemes over the years to construct bridges downriver from Algiers Point, this bridge has been the southernmost bridge on the Mississippi River since its initial construction in the 1950s. The years immediately following the end of World War II were a transformational period in the history of New Orleans. Already one of the great economic and cultural centers of the American Deep South, it was recognized at this time that major changes and improvements to the city’s transportation infrastructure would b...

Old US Route 99 through Tipton, Tulare, and Tagus Ranch

This summer I had a look into the alignment history of US Route 99 through the Tulare County communities of Tipton, Tulare, and Tagus Ranch.  While this slab below might seem like much it is one of the few remaining reminders of how US Route 99 was during the 1920s in Tulare County. This blog is part of the larger Gribblenation US Route 99 Page.  For more information pertaining to the other various segments of US Route 99 and it's three-digit child routes check out the link the below. Gribblenation US Route 99 Page Part 1; the history of US Route 99 in Tipton, Tulare, and Tagus Ranch Tipton and Tulare were both founded in 1872 as sidings of the Southern Pacific Railroad.  The Southern Pacific Railroad laid the groundwork for development of southern San Joaquin Valley.  Previous to the Southern Pacific Railroad travel via wagon or foot in Central California tended to avoid San Joaquin Valley in favor of the Stockton-Los Angeles Road.  The Stockton Los Ange...

Former US Route 101 and California State Route 41 through Paso Robles

Paso Robles is a city located on the Salinas River of San Luis Obispo County, California.  As originally configured the surface alignments of US Route 101 and California State Route 41 converged in downtown Paso Robles.  US Route 101 originally was aligned through Paso Robles via Spring Street.  California State Route 41 entered the City of Paso Robles via Union Road and 13th Street where it intersected US Route 101 at Spring Street.  US Route 101 and California State Route 41 departed Paso Robles southbound via a multiplex which split near Templeton.   Pictured above is the cover of the September/October 1957 California Highways & Public Works which features construction of the Paso Robles Bypass.  Pictured below is the 1935 Division of Highways Map of San Luis Obispo County which depicts US Route 101 and California State Route 41 intersecting in downtown Paso Robles.   Part 1; the history of US Route 101 and California State Route 41 i...