Skip to main content

Work to Start on US 70 Goldsboro Bypass in Fall

Image
By
With work on one new US 70 Bypass (Clayton) almost over, constructing another one is set to begin. The US 70 Bypass of Goldsboro (or in actuality a bypass of an existing bypass) is set to begin in the fall. Residents got to make comments last Thursday (5/22) at a forum sponsored by the U.S. 70 Corridor Commission which aims to improve the route from I-95 to the coast. The Bypass will be built in 4 phases, only the one to begin this fall running from I-795 (or maybe I-795/US 117) to Wayne Memorial Drive and costing $234 million is funded. The remaining 3 projects are unfunded and will start sometime after 2015.

Story: Goldsboro News-Argus

Commentary: Well, it appears building this bypass will certainly take longer than the US 70 Clayton Bypass. Hopefully this one will have more control over development than that of its predecessor preventing the building of yet another bypass in 10-20 years. What do you think the designations will be when the entire route is finished? Will Business 70 get moved to the old bypass, or will it stay as is leaving just US 13 and NC 111 on the old route?
Labels:

Comments

Anonymous said…
The current 70 Bypass is universally thought of as "70" to the locals, not 117 or 13. And presumably the new by-bypass will ultimately go beyond Berkley Boulevard, meaning that there will be a non-multiplexed portion of today's bypass that wil get by-bypassed. That section has numerous businesses on it, and therefore we can expect the same resistance to losing the U.S. highway designation that we've seen in other areas.

For these reasons, I'm expecting a situation similar to Smithfield-Selma: today's bypass will become "US 70" (unbannered), the by-bypass will be designated "70 Bypass", and today's 70 Business will remain the same.
5:09 PM
Anonymous said…
I think the current US 70 Business will remain named as it is. I'm not sure about the current "bypass."

I'm a local and like rhodent said, here, we refer to it as "70." It's the main road I take to get into the city from the neighborhood I live in.
6:10 AM
Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more