Skip to main content

NCDOT Meets with Residents about Greensboro Urban Loop Noise

Don't expect a lot of "Kumbaya" moments during tonight's public meetingabout traffic noise and the city's western loop.

Some residents along the 7.5-mile route are hoping a recent review by the state Department of Transportation will result in more noise walls being built between their neighborhoods and the new interstate bypass.

The article goes on to say its doubtful NCDOT will provide more noise walls for residents bordering the new leg of the Greensboro Urban Loop (I-40/I-73). They say legally they are not responsible for providing sound walls for people who built houses after the project was announced back in 1996. Some residents cry foul saying either NCDOT was not honest about constructing the road, calling it Painter Blvd. which implied to some a 4-lane surface roadway not a 6-8 lane freeway. Others suggest the noise analysis done for the road was flawed either due to bad design or an undercount of potential traffic, particularly trucks, using the road. NCDOT in response said they indicated all along that the route would be an interstate highway.

Story: Greensboro News & Record

Commentary:
It's easy to feel sorry for some of these people who are truly impacted by the noise. I spent one summer house-sitting. The house was about 1/2 mile from I-40 and the noise of trucks often woke me up at night. Certainly, NCDOT has had its share of under-counting urban loop traffic (e.g., I-485) so it is possible this is the major reason for the noise problems. All this, however, doesn't absolve people from some responsibility since they moved into an area where they were told a highway was being constructed, if they didn't ask what exact type of highway, this is not NCDOT's fault. Certainly plans were available for residents in the area to look at. So there's probably enough blame to go around.

One possible way to at least reduce the truck traffic would be to put up a sign recommending trucks use the Business 40 route to US 220 back to the SE part of the Loop (I-40/85). NCDOT might worry though that the trucks would stay on Business 40 to Business 85 and through Death Valley increasing traffic through that area again (of course, some traffic probably does this now anyway knowing that the route is shorter). Maybe this can serve as another catalyst to make Business 40 and 3di interstate at least to US 220, a spur of I-40 for trucks to follow. Then again an even digit I-73 3di which would take Business 40 then US 220 back to the Loop might work better. I will be interested in what is reported about the meeting tomorrow.

Comments

Bob Malme said…
An update. Needless to say NCDOT was not sympathetic to the 200 or so people who showed up for the meeting. They told them, as expected, that they could not build any more noise walls. They could, though, plant more trees to provide an increased buffer between the freeway and the neighboring houses. For a news video story of the meeting go to:
http://www.wxii12.com/news/16373394/detail.html

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...

May 2023 Ontario Trip (Part 3 of 3)

  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...

Ghost Town Tuesday; Nichols, FL

A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida.  One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region.  For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate.  Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century.  Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area.  The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...