Skip to main content

A Carolinas Road Meet Preview

Image
By
Bob Malme and I did a brief road trip today to scout for the upcoming Carolinas Road Meet on Saturday, May 31.

The meet will be featuring a tour of the soon to be completed US 70 Clayton Bypass. The bypass will carry US 70 around one of the more congested areas of the triangle, the town of Clayton. It will run from Interstate 40 at milemarker 310 to the current US 70/US 70 Business split west of Smithfield and Selma. Besides the two interchanges at the bypass' terminal points (I-40 and US 70 Business) there will also be diamond interchanges with NC 42 and Ranch Road.

The meet will be held at the Cleveland Draft House on NC 42 in Garner at 12:30 PM on Saturday, May 31st. The group will meet up for lunch and then head on a tour of the Clayton Bypass and perhaps a few other items. We should be done around 3:30-4 pm.

If you are interested in going to the meet, just send me an e-mail.

Since I usually never get around to taking photos the day of the meet, here are some photos from the trip today:

Overhead signs at the Western Terminus of the Clayton Bypass at Interstate 40.

Looking eastbound on US 70. The NC 42 interchange is ahead.

Line painting is taking place on soon to be US 70 East at Exit 326 - US 70 Business (The eastern terminus of the bypass)

A closer view of the Exit 326 overhead.

You'd think that the 55 mph speed limit sign here on Cole Road would have been removed.

Pretty soon this 'End' sign for US 70 Business won't be needed as it will continue west from here on the former mainline of Highway 70.
Labels:

Comments

Bob Malme said…
Was glad to join in on the Meet scouting. Other items of note: According to NCDOT, the Bypass is more than 98% complete, so it's possible it could be open by the Meet. The fact that they were working on line striping on a Saturday shows there is an urgency to get the job done. They were almost finished with the eastbound side, and had not started westbound. All the US 70 signage on the route to be bypassed had hidden business banners installed. There also covered over US 70 signs on I-40, hopefully with the right directional banners.

Speaking of incorrect banners, the BGSs going east on I-40 still had not been corrected; with hidden 'Business' labels over the East US 70 signage, instead of over west 70. Hopefully this will not delay the project opening and they will notice to fix it at a prior time.
5:01 PM
Bob Malme said…
I've put up some photos that help illustrate some of my comments in the previous post at:
http://www.duke.edu/~rmalme/
masshighway.html

Don't let the name fool you, the NC photos are toward the bottom, below the Mass. photos. They include a Jones Sausage Road sign photo as well.
5:57 PM
Post a Comment

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

By
The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...
2 comments
Read more

May 2023 Ontario Trip (Part 3 of 3)

By
  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...
Post a Comment
Read more

Ghost Town Tuesday; Nichols, FL

By
A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida.  One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region.  For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate.  Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century.  Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area.  The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...
4 comments
Read more