Skip to main content

Maxon Road (Fresno County)


Maxon Road is an approximately five-mile rural highway located in the Sierra Nevada foothills of Fresno County.  The corridor begins at Watts Valley Road and extends eastward to Trimmer Springs Road at the Pine Flat Reservoir.  Maxon Road is named after the Maxon's Hotel which used be located on the Kings River near the Trimmer Springs Resort.  The highway corridor begins appearing on maps in the 1920s and was modernized during 1947-1954 amid construction of Pine Flat Dam.  




Part 1; the history of Maxon Road

The corridor of Maxon Road is named after Maxon's Hotel was located on Trimmer Springs Road next to the site of the Trimmer Springs Resort.  The history of Maxon's Hotel is not clearly documented compared to the Trimmer Springs Resort. 

In 1889 Morris Trimmer would develop a resort along the Sanger Log Flume Road (now Trimmer Springs Road).  The Trimmer Springs resort would obtain Post Office Service originally the same year it opened.  By 1890 the postal service shuttered but it would reopen for a second time in 1892 and not close again until 1919.  The Sanger Log Flume Road east of Centerville would eventually come to be known as "Trimmer Springs Road" whereas the segment west to Sanger became known as "Rainbow Avenue." 

Trimmer Springs Resort and Maxon's Hotel can both be seen along the Kings River on the 1914 Weber & Company map of Fresno County.  Maxon's Hotel is shown to be connected to nearby Watts Valley by way of Sycamore Creek.


What is now modern Maxon Road first appears on 1920s era United States Geological Survey maps connecting Watts Valley to the Trimmer Springs Resort.  The corridor can be seen on the 1924 Dinuba edition following mostly the course of Watts Creek eastward. 


The Maxon Road corridor was improved between 1947-1954 when Pine Flat Dam was being constructed.  The then upcoming reservoir required the relocation of much of Trimmer Springs Road which made Maxon Road ideal to facilitate movement to the area on an interim basis.  

Maxon Road can be seen as it is presently configured on the 1965 United States Geological Survey map.  The corridor is shown to cross a 1,655-foot elevation ridge near the Trimmer Ranger Station.  The site of Maxon's Hotel and the Trimmer Springs Resort now lie under the waters of the Pine Flat Reservoir.  




Part 2; a drive on Maxon Road

Eastbound Maxon Road begins at Watts Valley Road in the namesake valley.  


Maxon Road departs Watts Valley beings to pick up the course of Watts Creek.  









Maxon Road briefly follows Watts Creek and splits away towards an unnamed ridge.  






The corridor of Maxon Road continues east and crests the unnamed 1,655-foot-high ridge.  















Maxon Road continues east through a series of switchbacks and passes the Sierra National Forest Trimmer Work Center.  The corridor terminates at Trimmer Springs Road within sight of the Pine Flat Reservoir.  



















Comments

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...

The last 1956-63 era California Sign State Route Spade?

Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...

California State Route 70; the Feather River Highway

From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...