Skip to main content

Pittsburgh's Southern Expressway - The Region's Last Free Highway

Image
By

It's often overlooked in Pittsburgh, but for about a decade, there was a road-building renaissance in the region from about 1985 to 1992.  The construction of long-delayed freeways and the closing of some missing links in the highway network occurred during this span.  With the completion of the North Shore and East Street Valley Expressways, Interstate 279 was finished.  Crosstown Boulevard and the Veterans Bridge completed Interstate 579.  The PA 65 Freeway connected the North Shore to Ohio River Boulevard.

Finally, in the western outreaches of Allegheny County, another new freeway, known as the Southern Expressway, was completed quickly - just over two years - opened in time for the opening of Greater Pittsburgh International Airport's new midfield terminal.  

The Southern Expressway is a seven-and-a-half-mile new freeway that connected the Airport Parkway near Montour Run Road to the Beaver Valley Expressway near Flaugherty Run Road.  While providing direct access to the new airport terminal, the new highway created a seamless full freeway connection from Beaver County to Downtown Pittsburgh.  Gone were the traffic signals, backups, and dangerous cross-traffic turns along the Airport Parkway near the former airport terminal entrance.

The congestion around the old terminal entrance had long been an issue.  During the 1970s, plans were made to build a short bypass of the terminal resulting in a direct freeway connection between the Beaver Valley Expressway and the Airport Parkway.  However, like many Pittsburgh and Pennsylvania highway plans of the 1970s, they fell by the wayside.

Like the roads around it, the old Greater Pittsburgh International Terminal was growing obsolete.  Constructed in the 1950s and known for the grand entrance compass laid in terrazzo, the hub for USAir was cramped, crowded, and outdated.  State funding for the new terminal facility would come in the mid-1980s, and construction would begin in 1987.

There was one thing lacking with the new terminal - any highway connection.  The new terminal would be located to the immediate west of the existing terminal utilizing the existing runways.  As a result, access from the existing Airport Parkway and network could not be utilized.  A new highway connection would be needed and be ready for traffic when the new terminal opened.

The Southern Expressway (now Interstate 376) at the Pittsburgh International Airport Interchange.  PA Turnpike 576 - the Southern Beltway - would open in October 2006.  (Doug Kerr)

Enter the Southern Expressway.

Today, this road is now part of Interstate 376, an 85-mile behemoth running from the Pennsylvania Turnpike in Monroeville, through some tunnels and downtown Pittsburgh, past Pittsburgh International Airport, before turning northwards to Interstate 80 near Sharon.

The Southern Expressway was a rarity as it quickly went from funded to construction to eventual completion.  Initially added to the Pennsylvania highway budget in 1986, the highway would open to great fanfare just six short years later.

The Southern Expressway took advantage of prior planning for a new midfield terminal and road connections as four highway alternatives took shape.  Two of the four plans would only include a spur from the existing airport area highways to the new terminal.  The other two plans would build a new freeway south and west of the old airport highway and the new terminal.  Various upgrades to the existing road network would differentiate between those two alternatives.  The four alternatives were presented for selection in May 1989.

The four alternatives for the Southern Expressway Project.  Alternative 4 would be selected and construction would begin in November 1990. (1)

Alternative Four - which would see the construction of the new airport expressway and upgrade the existing PA 60 in Moon Township - was ultimately selected.  Key to the decision was the desire to build a full ring road system around the new airport, allowing for redundancy in case of construction, accidents, or traffic. (1)  Alternative Four included the construction of new interchanges along the existing Airport Parkway.  It resurrected the freeway bypass of the former terminal at Beers School Road; and over time, would expand/complete interchanges along the new freeway, plus adding additional lanes (up to four in each direction) on the new freeway.

The list of all planned Southern Expressway related construction projects. Most have been completed. (1)

To meet the deadline of having the new highway opened in parallel to the new midfield terminal, a scaled-down version of Alternate Four was built first.  The new highway would only have four lanes of travel (two in each direction), some interchanges were built incomplete (Moon-Clinton Road, Flaugherty Run Road), and finally, improvements to the existing Airport Parkway were not initially completed.  Groundbreaking for the new project occurred in August 1990. (2)

Construction took two years at a cost of $210 million.  The project's original funding was $73 million.  The Southern Expressway (now known as the Airport Expressway) opened to traffic shortly after Labor Day in September 1992. (3)  The new Midfield Terminal opened to air travel on October 1, 1992.  In almost a nod to the planning of a redundant highway network, numerous airport-bound travelers found themselves taking the new highway to get to the unopened airport.  Fortunately, connections at Flaugherty Run Road or the White Swan Interchange allowed those travelers to get to the old terminal for their flights. (4)

Over the next decade, many of the punch list items from the Alternative Four solution were completed.  An interchange along the old Airport Parkway for Hookstown Grade Road (signed for Ewin Road) opened in 1998.  The McLaughlin Interchange (International Drive) along the old Airport Parkway was completed in 2003.  The missing ramps at the Moon-Clinton Road Interchange along the new freeway (I-376 Exit 52 today) were added.  

Plans for the fully operational Flaugherty Run Road (top) and Moon-Clinton Road Interchanges.  The Flaugherty Run Road interchange most likely will not be fully completed.  The Moon-Clinton Road Interchange missing ramps opened in 2006 under a different design. (1)

However, other projects, including the completion of the Flaugherty Run Road Interchange, the old terminal entrance bypass, or the widening of the new freeway have yet to or never will occur.

The Southern Expressway Project remains the last non-tolled expressway to open in the Pittsburgh Area.  The speed, driven by necessity, in which it opened is often overlooked as you rush along at 65 miles an hour to get to the airport in time to catch your next flight.

Site Navigation:

Sources & Links:



Labels:

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more