Skip to main content

A Decade in the Making: New Jersey's new Wittpenn Bridge finally Opens

Image
By

 

It’s taken about 10 years to reach this point, but the latest significant milestone in the replacement of the Wittpenn Bridge in northern New Jersey was announced recently as the new Wittpenn Bridge is now open to traffic.


Crossing the new Wittpenn Bridge (NJ Route 7) across the Hackensack River near Jersey City. The upper photos show the westbound crossing; the lower photos show the eastbound crossing

Both the old and new bridges span the Hackensack River near Jersey City, NJ in a heavily industrialized and heavily trafficked area in the New York metropolitan area. The bridges are located about three miles west of the Hoboken portal of the Holland Tunnel and this area has long been seen as an important crossroads point for both road & rail traffic in and around the region. The original highway bridge at this site was built in 1930 and featured a central vertical lift span along with a narrow four-lane roadway that may have been considered “modern” by Great Depression-era standards, but was vastly inadequate by the standards of today. The general substandard nature of the old bridge, plus the operational challenges of having to raise the bridge upwards of 80 times a year to accommodate marine traffic on the Hackensack (and the monumental traffic delays that would often be a result) forced New Jersey officials to consider replacing the bridge with a new span capable of better meeting the demands of both road & river traffic while providing more convenient connections on both approaches to other major highway links in the area. In fact, discussions on this subject had taken place as far back as the 1970s; repair/rehab contracts issued/executed in the early 1990s were originally meant to serve as a temporary solution until the bridge could be replaced entirely.

The new Wittpenn Bridge takes its place in the industrial setting of northern New Jersey alongside its predecessor and its neighboring railroad bridges. The second photo in this cluster shows the new flyover ramps connecting the western approach to Fish House Road in Kearny.

Ground was finally broken on the replacement bridge project in 2011 and has generally progressed at a snail’s pace for most of its life, due in large part to challenges related to the project’s location and funding. (The total price tag for the project is expected to come in at over $500 million.) The new bridge stands 70 ft above river level in the closed position, as opposed to the 35 ft above river level of its predecessor; this means that the new bridge will not have to be raised nearly as many times per year, which will generally improve the flow of traffic in the area. Its deck is also far wider than its predecessor and is wide enough to carry six travel lanes, plus full-width shoulders and dedicated pedestrian/cyclist space as part of the East Coast Greenway trail. While appearing to be very ordinary from a distance, this new bridge’s increased operational capacity and improved safety features represent a giant step in the right direction over what was in place previously.

The new bridge began carrying traffic on October 1, 2021 after nearly a decade of construction; work will continue on site for the next two years in the form of demolishing the old bridge and completing additional ramp connections on both approaches. It’s a project that has been talked about and built slowly over the last few decades, but this milestone of transferring traffic along Route 7 to a modern structure has been reached at last.

Approaching the Wittpenn Bridge along NJ Route 7 from the west (left) and from the east (right)

This bridge and its predecessor are named for Henry Otto Wittpenn, a former mayor of Jersey City, NJ (1908-1913), who also served as a State Highway Commissioner and member of the New Jersey State Highway Commission (a precursor of today’s New Jersey Department of Transportation – NJDOT). Wittpenn also ran unsuccessfully for Governor of New Jersey in 1916 while serving simultaneously as a Civilian Overseer of the Port of New York, a position he was appointed to by President Woodrow Wilson. Wittpenn’s name has been attached to the highway bridge(s) at this location ever since his death in 1931.


As the new Wittpenn Bridge (far right) begins to carry traffic, the old bridge (center) has been retired and demolition work has commenced. Immediately south of the old bridge are two railroad bridges built at approximately the same time - the Harsimus Branch Bridge and the PATH Bridge.


How to Get There:

Labels:
Location: 3 Fish House Rd, Kearny, NJ 07032, USA

Comments

Unknown said…
You got yo say it God Bless them Iron Workers They did a great job even if it took a long time I'm sure it wasn't their fault GOOD JOB ! Eddie Gambino
4:24 PM
Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more