Skip to main content

Tour of Phase III of the Triangle Expressway

On Thursday, December 20th, the third - and at this point final - phase of the Triangle Expressway opened to traffic.  The opening extended the NC 540 Toll Road and additional five miles from US 64 in Apex to the NC 55 Bypass in Holly Springs.

Prior to the expressway's opening, I was fortunate enough to tour the highway via the Expressway Trot 5k on December 2nd.  On Christmas Eve, I took a spin on the new road for the first time.

For the entire flickr set, head here.

Since I never was able to get a good photo of it prior (and because I live on the opposite end of Wake County from here), I finally am able to post a photo of the 'END' NC 540 shield for the brief free section of NC 540. (I-40 to NC 54).

IMG_6727

Prior to that shot, the VMS announced that the highway is now open to NC 55 in Holly Springs.  This message alternates with a message explaining that tolls on that section will begin on January 2, 2013.

IMG_6726

And here's the newly opened stretch of highway!

IMG_6731

Don't let the empty roadway fool you - there was a fair amount of cars traveling the toll road on this afternoon.

IMG_6733

Designers of the toll road have mentioned that they included some visual aesthetics to enhance the driving experience and to differentiate if from a normal limited access highway.  The fancier concrete sign bridges, brick overpass foundations, and also brick sound barriers are part of those aesthetics.

IMG_6735

In addition, trees and shrubs have recently been planted in the grass median throughout the length of the toll road.

Here's the TriEx South at South Salem St. (Old US 1).

IMG_6740

Overheads for US 1 North and South just after the South Salem Street interchange.

IMG_6741

Toll NC 540 ends at the NC 55 Holly Springs Bypass.  What's interesting about this interchange is that traffic wanting to get on Bypass NC 55 West is directed over the median and onto the northbound Toll 540 carriageway to crossover NC 55 before taking a loop ramp onto Bypass NC 55 West.

IMG_6748

Here's the overhead for entering the Triangle Expressway from Highway 55 East.

IMG_6751

I detoured onto US 1 briefly so I could check out the signage for the new toll road on US 1 and also I was informed that the flyover ramp from US 1 North to Toll NC 540 North was actually pretty neat.

Here's the overheads on US 1 North at the Triangle Expressway Interchange (Exit 93)

IMG_6760

I think this is the first time in North Carolina a split ramp on a flyover interchange is split into A/B ramps.  I know that the ramps from I-40E to I-540/NC 540 or I-95N to I-40 does not have an A/B split.

IMG_6762

Chris Allen had given me a heads up on the flyover ramp from US 1 North to Toll 540 North.  And it is actually pretty interesting.  The ramp goes under the Triangle Expressway before going over US 1 to reach NC 540 North.  The signature red brick of the Triangle Expressway actually makes an impression here.

IMG_6763

Finally, I exited onto S. Salem St to check out how the new toll road is signed on more of a surface street/rural road.  Interestingly, there's an additional sign outside of the 'TOLL' 'NC 540 diamond' and Arrow.

IMG_6772




Comments

James Mast said…
"I think this is the first time in North Carolina a split ramp on a flyover interchange is split into A/B ramps."

Not true. The Northern I-485 interchange with I-77 did this first on the Inner loop ramp.

http://goo.gl/maps/d5rOM
Chris Allen said…
Thank you for not saying "Chris Allen had mentioned the US 1 flyover ramp, but I actually thought it was totally lame and uninteresting and a complete waste of my time." :)
Brent White said…
James, I-77 Southbound at I-277 has had the split into A/B ramps at least since 1994.
James Mast said…
Brent, that's not a flyover like the I-485/I-77 interchange is.

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...

May 2023 Ontario Trip (Part 3 of 3)

  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...

Ghost Town Tuesday; Nichols, FL

A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida.  One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region.  For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate.  Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century.  Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area.  The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...