Skip to main content

Christmas Eve trip through the Laurel Highlands

Image
By
On Christmas Eve, I traditionally take a brief four or five hour loop trip to an area of Southwestern PA I haven't been to before.  This Christmas Eve was no different as I headed east into the Laurel Highlands.

Route: PA 48, PA 51, I-70, PA 31, US 119, PA 982, US 22, PA 217, US 30, PA 711, PA 31, PA Tpk, I-70, PA 51, and PA 48.

The entire photo set on flickr is here.

When I got on PA 982 North, I immediately came upon this sign.

002

Obviously, I was curious about the Iron Furnace (more on that later); however, the sign style intrigued me.  The sign's font, besides being the same font from Law & Order, is what is used for the destination signs throughout the Laurel Highlands.  These signs come from the Laurel Highlands Visitor Bureau.  The style is slightly similar to the Keystone Town Markers we all know and love, but aren't exact.

So I did travel the four or so miles up PA 982 and then took a quick right turn onto Oremine Hill Road and came to the Mount Vernon Iron Furnace.

004

Amazingly, this stone furnace has been standing here since the early 1800s!  It was first built my Isaac Mason in 1798 and operated until 1830.  It is amazing that something over 200 years old and exposed to the elements like this furnace is pretty good condition.

Further north on PA 982 is the town of Youngstown.  The town recently had a replica Keystone Town Marker made - but it's nowhere near as nice as the originals.

Youngstown

The brief amount of time I was on US 22 between PA 982 and PA 217 in Blairsville.  I noticed that there were a lot of jughandle turnaroundd on this recently rebuilt section.  Many of the jughandles also had guide signs for advance warning.  Like the one shown below.

009

At Blairsville, I exited US 22 to head south on PA 217.  However, I did briefly stop in Blairsville, and I am glad I did.  First, US 22 had ran through downtown Blairsville until the 1950s when US 22 was moved to the north on a new bypass.  US 22 ran through downtown Blairsville on Market Street.  But to get to Blairsville from Westmoreland County you had to cross the Conemaugh River over this bridge.

011

I stopped and did a quick photowalk through Blairsville, and it didn't disappoint.

012

013


020

From there, it was a rather uneventful drive down PA 217 to US 30 and then PA 711.  However, I did find one decent road item in Donegal.  A Pennsylvania Turnpike cutout that has seen better days.

026

From there it was onto the Turnpike and back to my parent's home to watch the football game and begin the Christmas celebrations.  Overall, this was a nice little trip, I do think that the scenery would be enhanced if there was some snowfall, but I did pick up some new mileage on PA 982, 217 and 711, so I can't complain.  Happy New Year Everyone!
Labels:

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more