Skip to main content

Remaining stretch of I-485 will feature three unique types of interchanges

Image
By
The remaining 5.4 miles of I-485 currently under construction in Mecklenburg County will feature three unique interchanges.  All three are in use elsewhere within the country, but would be the first ones built in the Tar Heel State.

At two of the interchanges, the new designs are considered upgrades (in traffic flow and cost savings) versus what had originally been planned.

The interchange design names are Split Diamond, Diverging Diamond, and Turbine.

Heading East from the current terminus at NC 115, the three new interchange designs run as follows:

The Split Diamond interchange will be located at Prosperity Church Road.  This interchange will consist of two access roads and six roundabouts.

Split Diamond Interchange with Prosperity Church Road (NCDOT)
The Diverging Diamond Interchange (DDI), first used in Missouri, is starting to catch interest in North Carolina.  The interchange design, actually reverses the lanes of traffic on the surface/cross street.  This will be located at the Mallard Creek Road exit on I-485.

This design replaces a planned Single Point Urban Interchange (SPUI) for 485 and Mallard Creek.


We covered a Diverging Diamond Interchange back in October when NCDOT announced it is considering the design on NC 133 where it meets the US 74/76 freeway in Leland.  These two intersections, along with two more on nearby Interstate 85 at NC 73 and Poplar Tent Road, are some of seven prospective locations for this new style of interchange.

Finally, the Turbine - an interchange that has all left turn movements circling around a central bridge in a clockwise direction, creating a seamless movement between the two highways.  This replaces the previously planned four-level stack interchange.  (Similar in design to where I-77 and 485 meet in Southern Mecklenburg County.)

The new "Turbine" interchange at 85/485.  (NCDOT)      
According to NCDOT, this type of interchange will cost less to build and maintain, take up less space, and allow for less interruptions to existing I-85 traffic during construction.


Story Links:
Last Outerbelt juntions to display unique functions ---Charlotte Observer
I-485 Charlotte Outer Loop ---NCDOT
Labels:

Comments

Froggie said…
NCDOT apparently doesn't see it as such, but I-40/Exit 195 (at NC 109) in Winston-Salem, is very much a split-diamond.
9:53 PM
Anonymous said…
Should that be counterclockwise, or am I missing something? (Maybe clockwise in countries that drive on the left...)
11:37 AM
Douglas Andrew Willinger said…
Reminds me of my Alexandria Orb proposal:

http://wwwtripwithinthebeltway.blogspot.com/2007/02/alexandria-orb-page-one-news-december.html

http://wwwtripwithinthebeltway.blogspot.com/search/label/Alexandria%20Orb
8:01 PM
Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more