Skip to main content

Remaining stretch of I-485 will feature three unique types of interchanges

Image
By
The remaining 5.4 miles of I-485 currently under construction in Mecklenburg County will feature three unique interchanges.  All three are in use elsewhere within the country, but would be the first ones built in the Tar Heel State.

At two of the interchanges, the new designs are considered upgrades (in traffic flow and cost savings) versus what had originally been planned.

The interchange design names are Split Diamond, Diverging Diamond, and Turbine.

Heading East from the current terminus at NC 115, the three new interchange designs run as follows:

The Split Diamond interchange will be located at Prosperity Church Road.  This interchange will consist of two access roads and six roundabouts.

Split Diamond Interchange with Prosperity Church Road (NCDOT)
The Diverging Diamond Interchange (DDI), first used in Missouri, is starting to catch interest in North Carolina.  The interchange design, actually reverses the lanes of traffic on the surface/cross street.  This will be located at the Mallard Creek Road exit on I-485.

This design replaces a planned Single Point Urban Interchange (SPUI) for 485 and Mallard Creek.


We covered a Diverging Diamond Interchange back in October when NCDOT announced it is considering the design on NC 133 where it meets the US 74/76 freeway in Leland.  These two intersections, along with two more on nearby Interstate 85 at NC 73 and Poplar Tent Road, are some of seven prospective locations for this new style of interchange.

Finally, the Turbine - an interchange that has all left turn movements circling around a central bridge in a clockwise direction, creating a seamless movement between the two highways.  This replaces the previously planned four-level stack interchange.  (Similar in design to where I-77 and 485 meet in Southern Mecklenburg County.)

The new "Turbine" interchange at 85/485.  (NCDOT)      
According to NCDOT, this type of interchange will cost less to build and maintain, take up less space, and allow for less interruptions to existing I-85 traffic during construction.


Story Links:
Last Outerbelt juntions to display unique functions ---Charlotte Observer
I-485 Charlotte Outer Loop ---NCDOT
Labels:

Comments

Froggie said…
NCDOT apparently doesn't see it as such, but I-40/Exit 195 (at NC 109) in Winston-Salem, is very much a split-diamond.
9:53 PM
Anonymous said…
Should that be counterclockwise, or am I missing something? (Maybe clockwise in countries that drive on the left...)
11:37 AM
Douglas Andrew Willinger said…
Reminds me of my Alexandria Orb proposal:

http://wwwtripwithinthebeltway.blogspot.com/2007/02/alexandria-orb-page-one-news-december.html

http://wwwtripwithinthebeltway.blogspot.com/search/label/Alexandria%20Orb
8:01 PM
Post a Comment

Popular posts from this blog

Crescent City Connection (New Orleans, LA)

By
The Crescent City Connection is a massive dual-span steel truss bridge that spans the lower Mississippi River at downtown New Orleans, about 95 river miles upstream from the mouth of the great river at the Head of Passes Light. If counted as a single bi-directional highway bridge, the parallel spans combine to form the single busiest bridge on the Mississippi River and its importance as a linchpin in the region’s transportation network cannot be overstated. While there have been various schemes over the years to construct bridges downriver from Algiers Point, this bridge has been the southernmost bridge on the Mississippi River since its initial construction in the 1950s. The years immediately following the end of World War II were a transformational period in the history of New Orleans. Already one of the great economic and cultural centers of the American Deep South, it was recognized at this time that major changes and improvements to the city’s transportation infrastructure would b...
Post a Comment
Read more

Old US Route 99 through Tipton, Tulare, and Tagus Ranch

By
This summer I had a look into the alignment history of US Route 99 through the Tulare County communities of Tipton, Tulare, and Tagus Ranch.  While this slab below might seem like much it is one of the few remaining reminders of how US Route 99 was during the 1920s in Tulare County. This blog is part of the larger Gribblenation US Route 99 Page.  For more information pertaining to the other various segments of US Route 99 and it's three-digit child routes check out the link the below. Gribblenation US Route 99 Page Part 1; the history of US Route 99 in Tipton, Tulare, and Tagus Ranch Tipton and Tulare were both founded in 1872 as sidings of the Southern Pacific Railroad.  The Southern Pacific Railroad laid the groundwork for development of southern San Joaquin Valley.  Previous to the Southern Pacific Railroad travel via wagon or foot in Central California tended to avoid San Joaquin Valley in favor of the Stockton-Los Angeles Road.  The Stockton Los Ange...
Post a Comment
Read more

Former US Route 101 and California State Route 41 through Paso Robles

By
Paso Robles is a city located on the Salinas River of San Luis Obispo County, California.  As originally configured the surface alignments of US Route 101 and California State Route 41 converged in downtown Paso Robles.  US Route 101 originally was aligned through Paso Robles via Spring Street.  California State Route 41 entered the City of Paso Robles via Union Road and 13th Street where it intersected US Route 101 at Spring Street.  US Route 101 and California State Route 41 departed Paso Robles southbound via a multiplex which split near Templeton.   Pictured above is the cover of the September/October 1957 California Highways & Public Works which features construction of the Paso Robles Bypass.  Pictured below is the 1935 Division of Highways Map of San Luis Obispo County which depicts US Route 101 and California State Route 41 intersecting in downtown Paso Robles.   Part 1; the history of US Route 101 and California State Route 41 i...
Post a Comment
Read more