Skip to main content

I-70 Overpass to be replaced by July of 2011 - is a six lane I-70 possible?

Image
By
PennDot quickly announced it's plans to rebuilt the Kammerer Interchange overpass that was destroyed by an over-height vehicle last week.  The new bridge that will carry McIlvanie Road over Interstate 70 should be re-opened in July of next year.

The new bridge will also be longer, wider, and higher.  The old bridge was built in the 1950s with a 14'9" clearance.  The new bridge will be built to modern interstate standards, and that means a higher vertical clearance of 16'6".  The cost will be between $4-$8 million.  The design-build contract will go out to bid on November 4th.

In the comments section of the original blog entry, Steve Williams suggested that PennDOT should bill the trucking company, driver, and insurance company for the cost to replace the bridge.  And according to PennDOT's Joe Szczur, they will be doing exactly that.  In the meantime, PennDOT is using emergency funds for the bridge replacement.

The new bridge will also be longer.  It will be built to accommodate a six lane I-70.  However, PennDOT doesn't have any concrete plans at the moment for widening the nearly sixty year old highway.  No word either if the replacement bridge will include a slight reconfiguration (wider) of the Kammerer Interchange.

Story Link:
Razed bridge's replacement set for July  ---Pittsburgh Post-Gazette

Commentary:

My biggest takeaway from the article wasn't that PennDOT plans on billing the trucking company for the replacement bridge - or that it would be to modern interstate standards.  Common sense pretty much dictates that.  It was that the bridge will be built to accommodate a six lane I-70 that stuck out to me.

A six lane I-70 was first brought up in the 1970s.  This new I-70 would be built on a parallel alignment to the North.  However, the PennDOT fiscal crisis of the mid-70s killed any movement on that project.

So are there plans on the table for widening I-70 to six lanes? No, there is not.  Jon Schmitz of the Post-Gazette wrote me back and confirmed that there are not any immediate plans to widen the highway to six lanes.  The new bridge will have a 100 year life span, so hey why not build it to six lanes just in case that ever happens - and if the state ever has the money for it.

Right now PennDOT does have plans to do some safety improvements for I-70 which includes having a wider median, shoulders, and extending ramps where possible.  An example of this is currently underway at the Eight Four interchange with PA 519.  The interchange is being rebuilt and redesigned, and the highway is being widened to include a 10' median w/concrete barrier and 12' wide shoulders. But nothing about six lanes.

In order for a six lane I-70 to be possible, it's going to have to be tolled.  The right-of-way acquisition, interchange rebuilds, and more importantly the replacement of two lengthy bridges.  The Speers over the Monongahela and the Smithton High Level over the Youghbare going to put a six lane widening of I-70 from washing to New Stanton well into the billions of dollars.  and there's no real possibility of funding coming from traditional sources at this time.

So will we ever see a six lane I-70, I doubt it.  But that one line means PennDOT somewhere has an idea for it.
Labels:

Comments

Brian said…
Most overpass reconstructions these days are designed to accommodate expanded roadways whether or not there are any widening plans in the near term, so it shouldn't be all that shocking that PennDOT would rebuild to better standards. They should be doing that, especially considering that they should be recouping the cost from insurance. It would be foolish for them to rebuild to the current standard (permissible when the result of an accident) and then have to bear the full cost should they have to expand later.
1:29 AM
Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more