Skip to main content

The history of the short-lived Interstate 82S (and N)

Image
By

The early days of the Interstate Highway System were marked by significant changes and political maneuvering.  The short history of Interstate 82S (and 82N) is an overlooked example.  Born in 1957 during the original Interstate numbering plans, Interstates 82N and S, as well as their parent Interstate 82, were to run from Interstate 15 in Idaho (I-82N) and Utah (I-82S), respectively, to Interstate 5 in Portland, Oregon.

The original (August 1957) approved Interstate system numbering.  These 'paper' designations would last less than a year as new corridors and some politicking would make changes, specifically to the Western I-82 and its two branches I-82N and I-82S.  There was an eastern I-82 proposed via a Scranton to New York City Corridor.

Interstate 82 would split east of Heyburn, Idaho, with the north branch, I-82N, running to I-15 in Pocatello.  The southern branch (I-82S) would run southeast to I-15 near Tremonton, UT.  Yet, almost a year later, I-82 and I-82S would be replaced by Interstate 80N and I-82N with Interstate 15W.  And Interstate 82 would find its designation moved to an entirely new corridor. What happened?

The modern-day junction of Interstate 84 and 86 in rural Idaho.  According to the original Interstate numbering plan, this would be where I-82 split into Interstate 82N (towards Pocatello) and Interstate 82S (towards Salt Lake).  Photo by Doug Kerr - May 2025.

First, in late 1957, additional mileage to the Interstate highway system was allocated and awarded.  A roughly 40-mile corridor connecting Interstate 15 in South Ogden to Interstate 80 at Echo Junction was added to the system.  This could be seen as linking the Interstate 82 system with Interstate 80 - a direct line from Oregon, Idaho, and Northern Utah to one of the major new East-West Interstate corridors.

And that's where a push to rename Interstate 82 and its branches to Interstate 80N comes into play.  Officials in both Idaho and Oregon felt snubbed that they would no longer be part of a coast-to-coast route.  Opponents to the Interstate 82 designation, which included Idaho Governor Robert E. Smylie, referred to the fact that the new Interstate 82 was replacing the Atlantic-to-Pacific US 30 and that Interstate 82 was not a transcontinental route, referring to the main trunk line as Interstate 80 to the south. (1)  

Oregon showed off their new I-82 
shields in early 1958, but state
leaders hated the number. (2)
Calling the Interstate 82 designation "...not sound, nor will it be conducive to public interest" (1) and "...unwarranted discrimination against the Northwest," (2) Smylie, the Oregon-Washington-Idaho Chamber of Commerce Managers Association, and other communities lobbied the American Association of State Highway Officials (AASHO) to make a change. 

Congressman Al Ullman of Oregon's 2nd Congressional District proposed in a letter to AASHO on March 4, 1958, "...a solution to the problem, the re-designation of Highway 80 west of the division point in Utah.  Thus two routes of equal status could be designated, one as Highway 80 North to Portland and Astoria and one as Highway 80 South to San Francisco." (3)

In July of 1958, it happened.  AASHO changed the designation of Interstate 82S and Interstate 82 from Echo Junction, UT to Portland as Interstate 80N. (4) Interstate 82N would become Interstate 15W.  

Further, Interstate 82 would find a new home.  A new 144-mile interstate corridor from Pendleton, Oregon to Ellensburg, Washington, was added in the Autumn of 1957.  That new two-state highway would be assigned Interstate 82.

The changes to the former Interstate 82 corridors weren't finished yet.  By the 1970s, many motorists and state highway agencies were frustrated with the suffixed interstate routes.  Motorist confusion on whether to stay on Interstate 80 or Interstate 80N, among other split routes, led AASHO to change many of these designations to individual numbers.  In 1977, after negotiations between them, the three states of Oregon, Idaho, and Utah agreed to change Interstate 80N to Interstate 84.  The conversion was complete by 1980 and has not changed to this day.

Possibly the only I-82S shield ever seen.  Utah had begun construction on a 5.6-mile section of Interstate 82S (now Interstate 84) from Howell to Rattlesnake Pass when the highway's designation changed to Interstate 80-N. (5)

While Interstate 82S was short-lived, it was around long enough for Utah in late 1957/early 1958 to award construction projects for the route.  Although it wasn't signed, Interstate 82S was around just enough to have a shield used in a newspaper graphic.

The lifespan of Interstate 82, 82N, and 82S was less than one year.  Yet, its brief history shows that one single number can hold significant influence.

Sources & Links:




Labels:

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more