Skip to main content

Netcher Road Covered Bridge - Ashtabula County, Ohio

Image
By

 


Of all of the covered bridges found around Ashtabula County, Ohio, the Netcher Road Covered Bridge located in Jefferson, Ohio was the last covered bridge built in the county during the 20th Century, opening to the public in August 1999. Just a few years younger than the nearby Smolen-Gulf Bridge, the Netcher Bridge is built with a Haupt truss design and features what is best described as a neo-Victorian exterior look. The Netcher Road Covered Bridge crosses Mill Creek is 110 feet in length, 22 feet in width and 14 feet, 6 inches tall, which can easily withstand the height clearance of most vehicles. Designed by then-Ashtabula County Engineer John Smolen with an architectural design by local architect Beverly Cowles of Jefferson, Ohio, the covered bridge cost $819,050 and was funded through a Federal Intermodal Surface Transportation Efficiency Act grant.

John Smolen himself chose the Haupt truss design for the bridge, a design originally used in railroad design and created by Herman Haupt of the Pennsylvania Railroad in 1854. Richter Construction of Columbus, Ohio won the bid to construct the covered bridge, while the 24 ton trusses for the covered bridge were fabricated in Ripley, West Virginia. Southern pine was used for the interior bridge construction, namely the arches, walls, floor and roof. Yellow poplar was used for the covered bridge's siding. The covered bridge was stained red and trimmed in a cream color, since painted white. The light trim makes the cupolas above the bridge's portals certainly stand out. The architectural highlights of the bridge include cupolas with copper roofs at each end.

I visited the Netcher Road Covered Bridge while chipping away at my list of seeing the many covered bridges in Ashtaubla County. The cupola and siding design for this bridge are what really make it stand out, especially as it is a design feature I don't really come across when seeing covered bridges around the Northeastern United States. The Netcher Road Covered Bridge is certainly worth the quick visit if you are exploring covered bridges in northeast Ohio.





How to Get There:



Sources and Links:
Ashtabula County Barn Quilt Trail - Netcher Road
Ashtabula County Ohio Visitors Bureau - Netcher Road Covered Bridge
The Pennsylvania Rambler - Netcher Road Covered Bridge
My Ohio Fun - Ashtabula County Covered Bridge Tour
Tom The Backroads Traveller - The Netcher Road Covered Bridge
Ashtabula Star Beacon - Netcher Road: The last covered bridge built over Mill Creek (April 12, 2009)
Labels:
Location: Netcher Road Covered Bridge, 1544 Netcher Rd, Jefferson, OH 44047, USA

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more