Skip to main content

Tacony-Palmyra Bridge

Image
By

Spanning the Delaware River between the neighborhood of Tacony in northeast Philadelphia, Pennsylvania with Palmyra, New Jersey, the Tacony-Palmyra Bridge was initially constructed in order to fulfill a glaring transportation need, which was to have meaningful crossings between Philadelphia and Trenton. At first, there was a car ferry between Tacony and Palmyra starting in 1922, with ferry slips built close to trolley lines on the Pennsylvania side of the river. But that soon proved to be quite popular and within a few years, there was a desire to replace the car ferry with a bridge at the same place the ferry crossed the Delaware River, further connecting northeast Philly with South Jersey.

It was in 1928 when local investors hedged their bets on having a tolled bridge built at the ferry between Tacony and Palmyra and formed the Tacony-Palmyra Bridge Company. The company hired  engineer Rudolph Modjeski, to design the bridge. Modjeski also designed the Manhattan Bridge and the Benjamin Franklin Bridge. Construction began in February 1928 and the new bridge opened to traffic in August 1929, a mere 18 months and $4 million dollars later. At the time, the toll was 35 cents and an average of 3,500 cars a day made the trip. In five years, the number of vehicles doubled. Today, the bridge has a $4 cash toll and $3 E-ZPass toll for Pennsylvania bound traffic. Approximately 70,000 vehicles per day use the bridge. The Tacony-Palmyra Bridge was privately owned and operated until 1948, when the Burlington Bridge Commission purchased the bridge. At one time, the bridge carried the eastern terminus of US 422, but today is designated as part of PA 73 and NJ 73.

The Tacony-Palmyra Bridge has a total bridge length is 3659 feet while vertical clearance under the main span is 61 feet at high tide. While the most visible part of the bridge is an arch, there is also a 260 foot long bascule span with counterweighted decks that pivot upwards to allow shipping to pass underneath. The drawbridge design was a political compromise in order to minimize construction delays and reduce costs. It is an attractive bridge and on a clear day, you can easily see the skyline of Center City Philadelphia. I've taken some photos of the Tacony-Palmyra Bridge from the bridge itself, along with some photos taken at the Palmyra Cove Nature Park on the New Jersey side of the bridge.












How to Get There:


Sources and Links:
Tacony-Palmyra Bridge - Delaware River Heritage Trail
Tacony-Palmyra Bridge - PhillyRoads.com
NJ 73 - Alps' Roads
PA 73 - Alps' Roads

Labels:
Location: Tacony-Palmyra Bridge, 1300 NJ-73, Palmyra, NJ 08065, USA

Comments

Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more